• Chinese Journal of Lasers
  • Vol. 44, Issue 6, 601001 (2017)
Ma Yanghua1、2、*, Yu Wendong2, Quan Bingxin2, Han Zonghu2, and Zhang Wei3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: 10.3788/cjl201744.0601001 Cite this Article Set citation alerts
    Ma Yanghua, Yu Wendong, Quan Bingxin, Han Zonghu, Zhang Wei. Influence of Path Length Control Mirror on the Dynamic Stability of Ring Laser Gyro[J]. Chinese Journal of Lasers, 2017, 44(6): 601001 Copy Citation Text show less
    References

    [1] Post E J. Sagnac effect[J]. Review of Modern Physics, 1967, 39(2): 475-493.

    [2] Chow W W, Gea-Banacloche J, Pedrotti L M, et al. The ring laser gyro[J]. Review of Modern Physics, 1985, 57(1): 61-104.

    [3] Ma Jiajun, Jiang Junbiao, Liu Jianning. Adaptive frequency stabilization technique for total reflection prism laser gyros[J]. Acta Optica Sinica, 2015, 35(3): 0314002.

    [4] Lee J I. Mirror design for piezo-driven mechanical devices[J]. International Journal of Precision Engineering and Manufacturing, 2012, 13(8): 1439-1443.

    [5] Lee S H, Shon W H, Suh S W, et al. Piezoelectric actuators for the correction of optical ray path in the operation of laser gyros[J]. International Journal of Precision Engineering and Manufacturing, 2011, 12(1): 91-96.

    [6] Borchert G, Burisch A, Raatz A. APIS-A miniaturized robot for precision assembly with low-cost piezoelectric motors[J]. International Journal of Precision Engineering and Manufacturing, 2011, 12(4): 629-634.

    [7] Jin Shilong, Long Xingwu, Li Xiaohong, et al. Research on new type control mirror of light path and optical path length for ring laser gyroscope[J]. Acta Optica Sinica, 2006, 26(4): 562-566.

    [8] Zhang Minghui, Liu Yuanzheng, Lan Peifeng, et al. Structural finite element analysis of path length control mirror for laser gyroscopes[J]. Journal of Applied Optics, 2011, 32(2): 353-357.

    [9] Liu Yuanzheng, Zhang Minghui, Zhang Huawei, et al. Optimization design for ring laser gyro path length control mirror[J]. Journal of Chinese Inertial Technology, 2013, 21(2): 235-239.

    [10] Yuan Jie, Long Xingwu. Optical-axis perturbation in nonplanar ring resonators[J]. Optics Communications, 2008, 281(5): 1204-1210.

    [11] Wen Dandan, Li Dong, Zhao Jianlin. Generalized sensitivity factors for optical-axis perturbation in nonplanar ring resonators[J]. Optics Express, 2011, 19(20): 19752-19757.

    [12] Yu Wendong, Wang Jingxian, Chen Linfeng, et al. Mechanism study on the effect of planar ring resonator parameters on ellipticity of modes in resonator[J]. Acta Optica Sinica, 2015, 35(8): 0814001.

    [13] Ma Yanghua, Zhang Ziguo, Han Zonghu. Investigation of optimal mode suppression ratio of laser gyro ring resonator[J]. Chinese J Lasers, 2014, 41(4): 0402007.

    [14] Yang H, Bosselman F, Chen M. A microcomputer system for automatic mode sweep of ring laser angular rate sensor (ring laser gyro)[J]. Chinese Journal of Lasers B, 1999, 8(2): 137-141.

    CLP Journals

    [1] Ma Jiajun, Xie Quan, Tian Zean, Liu Jianning, Jiang Junbiao. Frequency Tracking Technology for Dither Mechanism of Laser Gyros Based on Phase Locked Loop[J]. Laser & Optoelectronics Progress, 2018, 55(10): 101401

    [2] Zhao Hongchang, Wang Zhiguo. Influence of thermal transfer on temperature drift compensation in nonplanar four-frequency differential laser gyros[J]. Infrared and Laser Engineering, 2019, 48(9): 905005

    Ma Yanghua, Yu Wendong, Quan Bingxin, Han Zonghu, Zhang Wei. Influence of Path Length Control Mirror on the Dynamic Stability of Ring Laser Gyro[J]. Chinese Journal of Lasers, 2017, 44(6): 601001
    Download Citation