[1] HARRIS C I, SAVAGE S, KONSTANTINOV A, et al. Progress towards SiC products[J]. Appl Surf Sci, 2001, 184(1–4): 393–398.

[2] Kimoto T, Cooper J A. Physical Properties of Silicon Carbide[M]. John Wiley & Sons Singapore Pte. Ltd, 2014: 11–38.

[5] SPITSBERG I, STEIBEL J. Thermal and environmental barrier coatings for SiC/SiC CMCs in aircraft engine applications[J]. Int J Appl Ceram Technol, 2005, 1(4): 291–301.

[7] GAO Z W, LV X Y, YE F, et al. Improving mechanical properties of SiCw/SiC composite by phase content optimization via reactive melt infiltration[J]. Ceram Int, 2022, 48(22): 33712–33721.

[8] KHODAEI M, YAGHOBIZADEH O, BAHARVANDI H R, et al. The effect of nano-TiO2 additions on the densification and mechanical properties of SiC-matrix composite[J]. Ceram Int, 2020, 46(5): 6477–6483.

[9] GAO Z W, LV X Y, CHENG L F, et al. Combination of gel-casting and reactive melt infiltration for rapid fabrication of SiCw/SiC composites[J]. Ceram Int, 2021, 47(10): 14375–14381.

[10] KRENKEL W, BERNDT F. C/C–SiC composites for space applications and advanced friction systems[J]. Mater Sci Eng A, 2005, 412(1–2): 177–181.

[11] ZHAN J M, YAO X H, LI W H, et al. Tensile mechanical properties study of SiC/graphene composites based on molecular dynamics[J]. Comput Mater Sci, 2017, 131: 266–274.

[13] PETROVIC J J, MILEWSKI J V, ROHR D L, et al. Tensile mechanical properties of SiC whiskers[J]. J Mater Sci, 1985, 20(4): 1167–1177.

[14] ISHIKAWA T. Advances in inorganic fibers[M]//Polymeric and Inorganic Fibers. Berlin/Heidelberg: Springer-Verlag, 2005: 109–144.

[15] CADY C, HEREDIA F E, EVANS A G. In-plane mechanical properties of several ceramic–matrix composites[J]. J Am Ceram Soc, 1995, 78(8): 2065–2078.

[16] NIE J J, XU Y D, ZHANG L T, et al. Microstructure and tensile behavior of multiply needled C/SiC composite fabricated by chemical vapor infiltration[J]. J Mater Process Technol, 2009, 209(1): 572–576.

[19] MAO Y W, LI J W, LI W, et al. Binder jetting additive manufacturing of 316L stainless-steel green parts with high strength and low binder content: binder preparation and process optimization[J]. J Mater Process Technol, 2021, 291: 117020.

[20] Ealey M A, Weaver G Q, Ealey M A. Developmental history and trends for reaction-bonded silicon carbide mirrors[J]. Churchill Livingstone, 1996, 2857: 66–72.

[21] SINGH M, BEHRENDT D R. Microstructure and mechanical properties of reaction-formed silicon carbide (RFSC) ceramics[J]. Mater Sci Eng A, 1994, 187(2): 183–187.

[22] KHODAEI M, YAGHOBIZADEH O, NAGHAVI ALHOSSEINI S H, et al. The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review[J]. J Eur Ceram Soc, 2019, 39(7): 2215–2231.

[23] SONG N, ZHANG H B, LIU H, et al. Effects of SiC whiskers on the mechanical properties and microstructure of SiC ceramics by reactive sintering[J]. Ceram Int, 2017, 43(9): 6786–6790.

[24] XUE R, LIU P, ZHANG Z J, et al. Improvement of toughness of reaction bonded silicon carbide composites reinforced by surface-modified SiC whiskers[J]. Ceram Int, 2021, 47(13): 18150–18156.

[25] PAIK U, PARK H C, CHOI S C, et al. Effect of particle dispersion on microstructure and strength of reaction-bonded silicon carbide[J]. Mater Sci Eng A, 2002, 334(1–2): 267–274.

[27] OH J W, PARK J, NAHM S, et al. SiC–Si composite part fabrication via SiC powder binder jetting additive manufacturing and molten-Si infiltration[J]. Int J Refract Met Hard Mater, 2021, 101: 105686.

[28] ARAI S, TSUNODA S, YAMAGUCHI A, et al. Effects of short-glass-fiber content on material and part properties of poly(butylene terephthalate) processed by selective laser sintering[J]. Addit Manuf, 2018, 21: 683–693.

[29] LI S, ZHANG Y M, HAN J C, et al. Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite[J]. Ceram Int, 2013, 39(1): 449–455.

[30] DU W C, REN X R, PEI Z J, et al. Ceramic binder jetting additive manufacturing: A literature review on density[J]. J Manuf Sci Eng, 2020, 142(4): 040801.

[31] FENG K H, HU S D, LI L Y, et al. Preparation of low residual silicon content Si–SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration[J]. J Eur Ceram Soc, 2023, 43(13): 5446–5457.

[34] FLEISHER A, ZOLOTARYOV D, KOVALEVSKY A, et al. Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration[J]. Ceram Int, 2019, 45(14): 18023–18029.

[35] CRAMER C L, ELLIOTT A M, LARA-CURZIO E, et al. Properties of SiC-Si made via binder jet 3D printing of SiC powder, carbon addition, and silicon melt infiltration[J]. J Am Ceram Soc, 2021, 104(11): 5467–5478.