• Piezoelectrics & Acoustooptics
  • Vol. 46, Issue 6, 840 (2024)
LIU Xiangyu1, CHEN Zhijun1, PANG Qiqi2, LIU Qingrui1, and XUE Xinshuo1
Author Affiliations
  • 1College of Automation Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
  • 2CETC Deqing Huaying Electronics Co., Ltd., Deqing 313200, China
  • show less
    DOI: 10.11977/j.issn.1004-2474.2024.06.002 Cite this Article
    LIU Xiangyu, CHEN Zhijun, PANG Qiqi, LIU Qingrui, XUE Xinshuo. Research on SAWR Sensing Based on Impedance-Loaded Principle[J]. Piezoelectrics & Acoustooptics, 2024, 46(6): 840 Copy Citation Text show less
    References

    [2] LEFF D, WINTERS S, DA CUNHA M P. Temperature and dynamic strain measurements using a single SAWR sensor[C]∥Venice, Italy: IEEE International Ultrasonics Symposium, 2022: 1-4.

    [3] XIAO Q, MA X, WANG W, et al. High-performance SAWR strain sensor with piston-mode operation[J]. IEEE Sensors Journal, 2021, 21(9): 10514-10521.

    [4] MASKAY A, DA CUNHA M P. High temperature static strain microwave acoustic sensor[C]∥Tours, France: IEEE International Ultrasonics Symposium, 2016: 1-4.

    [6] YUE X, KIELY J, LUXTON R, et al. Passive impedance sensing using a SAW resonator-coupled biosensor for zero-power wearable applications[J]. IEEE Sensors Journal, 2022, 22(3): 2347-2357.

    [9] TSENG S, WU R. Design of SAW filter and multiplexer module for 5G carrier aggregation[C]∥Hong Kong: IEEE Asia-Pacific Microwave Conference, 2020: 36-38.