[1] XIONG Y L. Intelligent manufacturing［J］. Science and Technology Review, 2013, 31(10): 3. (in Chinese)
[2] CAI H G. Thoughts on the development of Chinas robot industry［J］. Integration Technology, 2015, 4(5): 1-4. (in Chinese)
[3] HUANG T, CHEN CH, WANG H. Identification of dynamic parameters of a novel 3-DOF spindle head［J］. Journal of Mechanical Engineering, 2013, 49(19): 31-39. (in Chinese)
[6] JAIME G A, ALBERT B S, EDUARDO C C. An application of screw theory to the kinematic analysis of a Delta-type robot［J］. Journal of Mechanical Science and Technology, 2014, 28(9): 3785-3792.
[7] HUANG T, LI Y, LI S W. Criteria for conceptual design of reconfigurable PKM modules theory and application［J］. Science in China, Ser.E, 2002, 32(5): 628-635. (in Chinese)
[8] LIU H T, HUANG T. Kinematic design of 5-DOF hybrid robot with large workspace/limb stroke ratio［J］. Journal of Mechanical Engineering, 2007, 43(6): 14-20. (in Chinese)
[9] LI B, HUANG T, LIU H T. Position analysis of a 3-DOF PKM module for a 5-DOF hybrid robot exechon［J］. China Mechanical Engineering, 2010, 21(11): 2785-2789. (in Chinese)
[10] LI M. Design Theory and Methodology of the TriVariant a 5-DOF Reconfigurable PKM Module［D］. Tianjin: Tianjin University, 2005: 29-55. (in Chinese)
[11] LIU H T. Unified Parameter Modeling of Lower Mobility Robotic Manupulators: Theory, Methodology and Application［D］. Tianjin: Tianjin University, 2010: 3-87. (in Chinese)
[12] LI Y B, JIN ZH L, JI SH M. Design of a novel 3-DOF hybrid mechanical arm［J］. Sci China Ser E-Tech Sci, 2009, 52(12): 3592-3600. (in Chinese)
[13] LI Y B. Analysis and Design of a Novel 6-DOF Hybrid Mechanical Arm［D］. Qinhuangdao: Yanshan University, 2009: 17-37. (in Chinese)
[14] JIN ZH L, CAO SH, GAO F. Arc spline tool path generation for triangular mesh surface machining［J］. China Mechanical Engineering, 2009, 20(14): 1639-1642. (in Chinese)
[15] LI Y B, JIN ZH L, JI SH M. Error analysis of a parallel anthropopathic shoulder［J］. China Mechanical Engineering, 2009, 17(3): 446-451. (in Chinese)
[16] WANG Y L, JIN ZH L, LI Y B. Dynamic modeling and robust-adaptive iterative learning control of 3-rrr spherical parallel mechanism［J］. Journal of Mechanical Engineering, 2010, 46(1): 68-73. (in Chinese)
[17] QIN L. Research on Modeling and Control for Space Robot System with Gravity Effect Consideration［D］. Qinhuangdao: Yanshan University, 2014: 11-77. (in Chinese)
[18] MENG ZH X, XIAO D F, YIN H. Mechanism error compensation method of parallel curve feeding platform［J］. Journal of Beijing Forestry University, 2016, 38(9): 95-101. (in Chinese)
[19] NZUE R M, BRETHE J F, VASSELIN E. Comparison of serial and parallel robot repeatability based on different performance criteria［J］. Mechanism and Machine Theory, 2013, 40(7): 136-155.
[20] HOU Y L, DUAN Y B, DOU Y CH. Calibration of adjusting mechanism for sub reflector of a 65 meters radio telescope［J］. China Mechanical Engineering, 2013, 24(12): 3318-3328. (in Chinese)
[21] CHANAL H, DUC E, HASCOET J Y. Reduction of a parallel kinematics machine tool inverse kinematics model with regard to machining behaviour［J］. Mechanism and Machine Theory, 2009, 44(7): 1371-1385.
[22] HUANG ZH, ZHAO Y SH, ZHAO T SH. Advanced Spatial Mechanism［M］. Beijing: Higher Education Press, 2006: 277-283. (in Chinese)
[23] ZENG D X, HUANG Z. Type synthesis of the rotationaldecoupledparallel mechanism based on screwtheory［J］. Sci China Tech Sci, 2011, 41(5): 585-591.(in Chinese)
[24] DANG P F. Research on the Kinematic Accuracy and Parameter Identification Method of Parallel Kinematic Machine［D］. Shenyang: Northeastern University, 2015: 1-17. (in Chinese).
