[1] Tian Y T, Gora W S, Cabo A P et al. Material interactions in laser polishing powder bed additive manufactured Ti6Al4V components[J]. Additive Manufacturing, 20, 11-22(2018).

[2] Ma C P, Guan Y C, Zhou W. Laser polishing of additive manufactured Ti alloys[J]. Optics and Lasers in Engineering, 93, 171-177(2017).

[3] Wang S, Cheng X, Tian X J et al. Effect of TiC addition on microstructures and properties of MC carbide reinforced Inconel 625 composites by laser additive manufacturing[J]. Chinese Journal of Lasers, 45, 0602002(2018).

[4] Pradhan D, Mahobia G S, Chattopadhyay K et al. Effect of surface roughness on corrosion behavior of the superalloy IN718 in simulated marine environment[J]. Journal of Alloys and Compounds, 740, 250-263(2018).

[5] Feng X T, Gu H, Zhou S F et al. Microstructure and electrochemical corrosion behavior of TC4 titanium alloy cladding layer prepared with powder feeding laser additive manufacturing[J]. Chinese Journal of Lasers, 46, 0302003(2019).

[6] Yue T M, Yu J K, Mei Z et al. Excimer laser surface treatment of Ti-6Al-4V alloy for corrosion resistance enhancement[J]. Materials Letters, 52, 206-212(2002).

[7] Singh R, Kurella A, Dahotre N B. Laser surface modification of Ti-6Al-4V: wear and corrosion characterization in simulated biofluid[J]. Journal of Biomaterials Applications, 21, 49-73(2006).

[8] Cui Q, Yi D Q, Wang H X et al. Effects of grain size and secondary phase on corrosion behavior and electrochemical performance of Mg-3Al-5Pb-1Ga-Y sacrificial anode[J]. Journal of Rare Earths, 37, 1341-1350(2019).

[9] Wang W J, Yung K C, Choy H S et al. Effects of laser polishing on surface microstructure and corrosion resistance of additive manufactured CoCr alloys[J]. Applied Surface Science, 443, 167-175(2018).

[10] Evgeny B, Hughes T, Eskin D. Effect of surface roughness on corrosion behaviour of low carbon steel in inhibited 4 M hydrochloric acid under laminar and turbulent flow conditions[J]. Corrosion Science, 103, 196-205(2016).

[11] Walter R, Kannan M B. Influence of surface roughness on the corrosion behaviour of magnesium alloy[J]. Materials & Design, 32, 2350-2354(2011).

[12] Cabrini M, Cigada A, Rondell G et al. Effect of different surface finishing and of hydroxyapatite coatings on passive and corrosion current of Ti6Al4V alloy in simulated physiological solution[J]. Biomaterials, 18, 783-787(1997).

[13] Xia L D, Ji Y Z, Liu W B et al. Radiation induced grain boundary segregation in ferritic/martensitic steels[J]. Nuclear Engineering and Technology(2019).

[14] Li X, Xie F, Wang D et al. Effect of residual and external stress on corrosion behaviour of X80 pipeline steel in sulphate-reducing bacteria environment[J]. Engineering Failure Analysis, 91, 275-290(2018).

[15] Wang Y, Li K Y, Scenini F et al. The effect of residual stress on the electrochemical corrosion behavior of Fe-based amorphous coatings in chloride-containing solutions[J]. Surface and Coatings Technology, 302, 27-38(2016).