[1] LIU Q M, HUANG S Z, HE A J. Composite ceramics thermal barrier coatings of yttria stabilized zirconia for aero-engines［J］. J Mater Sci Technol, 2019, 35(12): 2814-2823.
[2] ZHANG Y, MALZBENDER J, MACK D E, et al. Mechanical properties of zirconia composite ceramics［J］. Ceram Int, 2013, 39(7): 7595-7603.
[5] MORENO R. Colloidal processing of ceramics and composites［J］. Adv Appl Ceram, 2012, 111(5/6): 246-253.
[6] ZHANG X P, WU X, SHI J. Additve manufacturing of zirconia ceramics: a state-of-the-art review［J］. J Mater Res Technol, 2020, 9(4): 9029-9048.
[7] SHISHKOVSHY I, YADROITSEV I, BERTRAND P, et al. Alumina-zirconium ceramics synthesis by selective laser sintering/melting［J］. Appl Surf Sci, 2007, 254(4): 966-970.
[8] ECKEL Z C, ZHOU C Y, MARTIN J H, et al. 3D printing additive manufacturing of polymer-derived ceramics［J］. Science, 2016, 351(6268): 58-62.
[9] HALLORAN J W. Ceramic stereolithography: additive manufacturing for ceramics by photopolymerization［J］. Annu Rev Mater Res, 2016, 46: 19-40.
[10] REVELO C F, COLORADO H A. 3D printing of kaolinite clay ceramics using the direct ink writing (DIW) technique. Ceram Int, 2018, 44(5): 5673-5682.
[11] PAN Z D, WANG Y M, HUANG H N, et al. Recent development on preparation of ceramic inks in ink-jet printing［J］. Ceram Int, 2015, 41(10): 12515-12528.
[12] LV X Y, YE F, CHENG L F, et al. Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment［J］. Ceram Int, 2019, 45(10): 12609-12624.
[13] GONZALEZ J A, MIRELES J, LIN Y, et al. Characterization of ceramic components fabricated using binder jetting additive manufacturing technology［J］. Ceram Int, 2016, 42(9): 10559-10564.
[14] DU W C, REN X R, PEI Z J, et al. Ceramic binder jetting additive manufacturing: A literature review on density［J］. J Manuf Sci E-T ASME, 2020, 142(4): 040801.
[15] MIAO G X, DU W C, MOGHADASI M, et al. Ceramic binder jetting additive manufacturing: effects of granulation on properties of feedstock powder and sintered parts［J］. Additive Manufacturing, 2020, 36: 101542.
[16] CAO S, XIE F X, HE X M, et al. Postprocessing study for the controllable structures of ceramic green parts realized by a flexible binder jetting printing (BJP) solution［J］. Adv Mater Sci Eng, 2020, 2020: 3865752.
[17] NAN B Y, YIN X W, ZHANG L T, et al. Three-dimensional printing of Ti3SiC2-based ceramic［J］. J Am Ceram Soc, 2011, 94(4): 969-972.
[18] WU H, CHENG Y, LIU W, et al. Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography［J］. Ceram Int, 2016, 42(15): 17290-17294.
[19] KUNCHALA P, KAPPAGANTULA K. 3D printing high density ceramics using binder jetting with nanoparticle densifiers［J］. Mater Design, 2018, 155: 443-450.
[20] ZHAO H P, YE C S, FAN Z T, et al. 3D printing of CaO-based ceramic core using nanozirconia suspension as a binder［J］. J Eur Ceram Soc, 2017, 37(15): 5119-5125.
[21] MOLINARI A, AMIRABDOLLAHIAN S, ZAGO M, et al. Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts［J］. Powder Metall, 2018, 61(4): 267-275.
[22] ZHAO H P, YE C S, XIONG S H, et al. Fabricating an effective calcium zirconate layer over the calcia grains via binder-jet 3D-printing for improving the properties of calcia ceramic cores［J］. Addit Manuf, 2020, 32: 101025.
[23] DU W C, REN X R, MA C, et al. Ceramic binder jetting additive manufacturing: particle coating for increasing powder sinterability and part strength［J］. Mater Lett, 2019, 234: 327-330.
