A thermal actuated switchable dry adhesive with high reversibility for transfer printing

Shun Zhang; Hongyu Luo; Suhao Wang; Zhou Chen; Shuang Nie; Changying Liu; Jizhou Song

doi:10.1088/2631-7990/abff69

[1] Zhou H L, Zhang Y, Qiu Y, Wu H P, Qin W Y, Liao Y B, Yu Q M and Cheng H Y 2020 Stretchable piezoelectric energy harvesters and self-powered sensors for wearable and implantable devices Biosens. Bioelectron. 168 112569

[2] Guan Y-S et al 2020 Air/water interfacial assembled rubbery semiconducting nanofilm for fully rubbery integrated electronics Sci. Adv. 6 eabb3656

[3] Wang Y H et al 2020 Electrically compensated, tattoo-like electrodes for epidermal electrophysiology at scale Sci. Adv. 6 eabd0996

[4] Pang W B et al 2020 Electro-mechanically controlled assembly of reconfigurable 3D mesostructures and electronic devices based on dielectric elastomer platforms Natl Sci. Rev. 7 342–54

[5] Song J, Feng X and Huang Y 2016 Mechanics and thermal management of stretchable inorganic electronics Natl Sci. Rev. 3 128–43

[6] Fan X Q, Li Y H, Chen S H, Xing Y F and Pan T S 2020 Mechanical terahertz modulation by skin-like ultrathin stretchable metasurface Small 16 2002484

[7] Linghu C, Zhang S, Wang C J and Song J 2018 Transfer printing techniques for flexible and stretchable inorganic electronics npj Flexible Electron. 2 26

[8] Liu J X, Song H L and Zhang Y H 2019 Toward imperfection-insensitive soft network materials for applications in stretchable electronics ACS Appl. Mater. Interfaces 11 36100–9

[9] Choi Y S et al 2020 Stretchable, dynamic covalent polymers for soft, long-lived bioresorbable electronic stimulators designed to facilitate neuromuscular regeneration Nat. Commun. 11 5990

[10] Han M D et al 2020 Catheter-integrated soft multilayer electronic arrays for multiplexed sensing and actuation during cardiac surgery Nat. Biomed. Eng. 4 997–1009

[11] Cai M, Nie S, Du Y P, Wang C J and Song J Z 2019 Soft elastomers with programmable stiffness as strain-isolating substrates for stretchable electronics ACS Appl. Mater. Interfaces 11 14340–6

[12] Nie S, Cai M, Wang C J and Song J Z 2020 Fatigue life prediction of serpentine interconnects on soft elastomers for stretchable electronics J. Appl. Mech. 87 011011

[13] Zhao S W, Zhu F, Yan Z G, Li D C, Xiang J W, Huang Y G and Luan H W 2020 A nonlinear mechanics model of zigzag cellular substrates for stretchable electronics J. Appl. Mech. 87 061006

[14] Qiu Y et al 2020 Bioinspired, multifunctional dual-mode pressure sensors as electronic skin for decoding complex loading processes and human motions Nano Energy 78 105337

[15] Li H G, Liu H Z, Sun M Z, Huang Y A and Xu L Z 2021 3D interfacing between soft electronic tools and complex biological tissues Adv. Mater. 33 2004425

[16] Zhang S et al 2020 A removable insertion shuttle for ultraflexible neural probe implantation with stable chronic brain electrophysiological recording Adv. Mater. Interfaces 7 1901775

[17] Wu H, Tian Y, Luo H B, Zhu H, Duan Y Q and Huang Y A 2020 Fabrication techniques for curved electronics on arbitrary surfaces Adv. Mater. Technol. 5 2000093

[18] Ma Y et al 2020 Flexible hybrid electronics for digital healthcare Adv. Mater. 32 1902062

[19] Shi C Q, Zou Z N, Lei Z P, Zhu P C, Zhang W and Xiao J L 2020 Heterogeneous integration of rigid, soft, and liquid materials for self-healable, recyclable, and reconfigurable wearable electronics Sci. Adv. 6 eabd0202

[20] Shi C Q, Zou Z N, Lei Z P, Wu X L, Liu Z W, Lu H Q, Zhang W and Xiao J L 2019 Investigating the self-healing of dynamic covalent thermoset polyimine and its nanocomposites J. Appl. Mech. 86 101005

[21] Bian J, Chen F R, Yang B, Hu J L, Sun N N, Ye D, Duan Y Q, Yin Z P and Huang Y A 2020 Laser-induced interfacial spallation for controllable and versatile delamination of flexible electronics ACS Appl. Mater. Interfaces 12 54230–40

[22] Zhang S, Wang C J, Linghu C H, Wang S H and Song J Z 2021 Mechanics strategies for implantation of flexible neural probes J. Appl. Mech. 88 010801

[23] Li H C et al 2020 Wearable skin-like optoelectronic systems with suppression of motion artifacts for cuff-less continuous blood pressure monitor Natl Sci. Rev. 7 849–62

[24] Chen Y, Liu F, Lu B W, Zhang Y C and Feng X 2020 Skin-like hybrid integrated circuits conformal to face for continuous respiratory monitoring Adv. Electron. Mater. 6 2000145

[25] Jeong J W et al 2014 High-resolution nanotransfer printing applicable to diverse surfaces via interface-targeted adhesion switching Nat. Commun. 5 5387

[26] Huang X et al 2013 Epidermal impedance sensing sheets for precision hydration assessment and spatial mapping IEEE Trans. Biomed. Eng. 60 2848–57

[27] Yan Z C et al 2017 Thermal release transfer printing for stretchable conformal bioelectronics Adv. Sci. 4 1700251

[28] Wang C J et al 2020 Programmable and scalable transfer printing with high reliability and efficiency for flexible inorganic electronics Sci. Adv. 6 eabb2393

[29] Zhang Y, Lu B W, Wang T, Feng X and Xu H X 2019 A photochemical approach toward high-fidelity programmable transfer printing Adv. Mater. Technol. 4 1900163

[30] Tian H M, Liu H R, Shao J Y, Li S, Li X M and Chen X M 2020 An electrically active gecko-effect soft gripper under a low voltage by mimicking gecko’s adhesive structures and toe muscles Soft Matter 16 5599–608

[31] Northen M T, Greiner C, Arzt E and Turner K L 2008 A gecko-inspired reversible adhesive Adv. Mater. 20 3905–9

[32] Jeong J, Kim J, Song K, Autumn K and Lee J 2014 Geckoprinting: assembly of microelectronic devices on unconventional surfaces by transfer printing with isolated gecko setal arrays J. R. Soc. Interface 11 20140627

[33] Luo H Y, Wang C J, Linghu C H, Yu K X, Wang C and Song J Z 2020 Laser-driven programmable non-contact transfer printing of objects onto arbitrary receivers via an active elastomeric microstructured stamp Natl Sci. Rev. 7 296–304

[34] Linghu C H, Wang C J, Cen N, Wu J M, Lai Z F and Song J Z 2019 Rapidly tunable and highly reversible bio-inspired dry adhesion for transfer printing in air and a vacuum Soft Matter 15 30–7

[35] Linghu C H, Zhu H D, Zhu J Y, Li C L and Song J Z 2019 Mechanics of magnet-controlled transfer printing Extreme Mech. Lett. 27 76–82

[36] Zhang X F, Linghu C H and Song J Z 2019 Three-dimensional mechanical modeling of magnet-controlled transfer printing Int. J. Appl. Mech. 11 1950042

[37] Carlson A, Wang S D, Elvikis P, Ferreira P M, Huang Y G and Rogers J A 2012 Active, programmable elastomeric surfaces with tunable adhesion for deterministic assembly by transfer printing Adv. Funct. Mater. 22 4476–84

[38] Wang S H, Luo H Y, Linghu C H and Song J Z 2021 Elastic energy storage enabled magnetically actuated, octopus-inspired smart adhesive Adv. Funct. Mater. 31 2009217

[39] Baik S, Kim D W, Park Y, Lee T, Bhang S H and Pang C 2017 A wet-tolerant adhesive patch inspired by protuberances in suction cups of octopi Nature 546 396–400

[40] Zheng N, Fang G Q, Cao Z L, Zhao Q and Xie T 2015 High strain epoxy shape memory polymer Polym. Chem. 6 3046–53

[41] Zhang S, Wang C J, Nie S, Xiao J L and Song J Z 2019 Wrinkling of silicon nanoribbons on shape memory polymers J. Phys. D: Appl. Phys. 52 265101

[42] Xin X Z, Liu L W, Liu Y J and Leng J S 2019 Mechanical models, structures, and applications of shape memory polymers and their composites Acta Mech. Solida Sin. 32 535–65

[43] Gao H, Li J R, Zhang F H, Liu Y J and Leng J S 2019 The research status and challenges of shape memory polymer-based flexible electronics Mater. Horiz. 6 931–44

[44] Dai L, Tian C and Xiao R 2020 Modeling the thermos-mechanical behavior and constrained recovery performance of cold-programmed amorphous shape-memory polymers Int. J. Plasticity 127 102654

[45] Wang R M, Xiao X C and Xie T 2010 Viscoelastic behavior and force nature of thermo-reversible epoxy dry adhesives Macromol. Rapid Commun. 31 295–9

[46] Linghu C H, Zhang S, Wang C J, Yu K X, Li C L, Zeng Y J, Zhu H D, Jin X H, You Z Y and Song J Z 2020 Universal SMP gripper with massive and selective capabilities for multiscaled, arbitrarily shaped objects Sci. Adv. 6 eaay5120

[47] Eisenhaure J D, Xie T, Varghese S and Kim S 2013 Microstructured shape memory polymer surfaces with reversible dry adhesion ACS Appl. Mater. Interfaces 5 7714–7

[48] Eisenhaure J D, Rhee S I, Al-Okaily A M, Carlson A, Ferreira P M and Kim S 2014 The use of shape memory polymers for microassembly by transfer printing J. Microelectromech. Syst. 23 1012–4

[49] Huang Y, Zheng N, Cheng Z Q, Chen Y, Lu B W, Xie T and Feng X 2016 Direct laser writing-based programmable transfer printing via bioinspired shape memory reversible adhesive ACS Appl. Mater. Interfaces 8 35628–33

[50] Eisenhaure J and Kim S 2016 Laser-driven shape memory effect for transfer printing combining parallelism with individual object control Adv. Mater. Technol. 1 1600098

[51] Reddy S, Arzt E and Del Campo A 2007 Bioinspired surfaces with switchable adhesion Adv. Mater. 19 3833–7

[52] Seo J, Eisenhaure J and Kim S 2016 Micro-wedge array surface of a shape memory polymer as a reversible dry adhesive Extreme Mech. Lett. 9 207–14

[53] Tan D, Wang X, Liu Q, Shi K, Yang B S, Liu S, Wu Z S and Xue L J 2019 Switchable adhesion of micropillar adhesive on rough surfaces Small 15 1904248

[54] Krahn J, Sameoto D and Menon C 2011 Controllable biomimetic adhesion using embedded phase change material Smart Mater. Struct. 20 015014

[55] Meitl M A, Zhu Z T, Kumar V, Lee K J, Feng X, Huang Y Y, Adesida I, Nuzzo R G and Rogers J A 2006 Transfer printing by kinetic control of adhesion to an elastomeric stamp Nat. Mater. 5 33–8

[56] Chen Z, Linghu C H, Yu K X, Zhu J Y, Luo H Y, Qian C H, Chen Y, Du Y P, Zhang S and Song J Z 2019 Fast digital patterning of surface topography toward three-dimensional shape-changing structures ACS Appl. Mater. Interfaces 11 48412–8