• Optics and Precision Engineering
  • Vol. 31, Issue 16, 2395 (2023)
Tongqun REN, Yongsheng SANG, Rungu CAO, Han WU, and Xiaodong WANG*
Author Affiliations
  • State Key Laboratory of High-performance Precision Manufacturing , Dalian University of Technology, Dalian116085, China
  • show less
    DOI: 10.37188/OPE.20233116.2395 Cite this Article
    Tongqun REN, Yongsheng SANG, Rungu CAO, Han WU, Xiaodong WANG. Automatic assembly and welding control of base components of suspended pendulum accelerometer[J]. Optics and Precision Engineering, 2023, 31(16): 2395 Copy Citation Text show less
    References

    [1] 1刘检华, 孙清超, 程晖, 等. 产品装配技术的研究现状、技术内涵及发展趋势[J]. 机械工程学报, 2018, 54(11): 2-28. doi: 10.3901/jme.2018.011.001LIUJ H, SUNQ C, CHENGH, et al. The state-of-the-art, connotation and developing trends of the products assembly technology[J]. Journal of Mechanical Engineering, 2018, 54(11): 2-28. (in Chinese). doi: 10.3901/jme.2018.011.001

    [2] 2路永乐. 小型悬丝摆式加速度传感器原理及关键技术研究[D]. 重庆: 重庆大学, 2015.LUY L. Study on the Principle and Key Technology of Small Suspension Wire Pendulum Acceleration Sensor[D]. Chongqing: Chongqing University, 2015. (in Chinese)

    [3] I GIOUROUDI, H HÖTZENDORFER, J KOSEL et al. Development of a microgripping system for handling of microcomponents. Precision Engineering, 32, 148-152(2008).

    [4] 4童辉. 超细桥丝全自动焊系统自动送丝控制技术研究[D]. 南京: 南京理工大学, 2022.TONGH. Research on Automatic Wire Feeding Control Technology of Ultra-Fine Bridge Wire Automatic Welding System[D]. Nanjing: Nanjing University of Science and Technology, 2022. (in Chinese)

    [5] 5何泽钧, 孙檀, 徐刚, 等. 金属化薄膜电容器扁形元件自动锡焊系统[J]. 机械制造, 2021, 59(10): 56-58. doi: 10.3969/j.issn.1000-4998.2021.10.018HEZ J, SUNT, XUG, et al. Automatic soldering system for flat components of metallized film capacitor[J]. Machinery, 2021, 59(10): 56-58. (in Chinese). doi: 10.3969/j.issn.1000-4998.2021.10.018

    [6] 6苏赞. 基于机器人的自动锡焊控制技术研究[D]. 北京: 机械科学研究总院, 2016.SUZ. Research on Automatic Soldering Control Based on Robot[D]. Beijing: General Research Institute of Mechanical Sciences, 2016. (in Chinese)

    [7] Z YAN. Discussion on the welding performance of automatic welding of industrial robot and manual welding. IOP Conference Series: Materials Science and Engineering, 637(2019).

    [8] A V MURYGIN, V S TYNCHENKO, V D LAPTENOK et al. Complex of automated equipment and technologies for waveguides soldering using induction heating. IOP Conference Series: Materials Science and Engineering, 173(2017).

    [9] H REN, X Y WU, W F SHANG. Vision-based soldering process parameters calculation for robotic soldering, 1189-1194(15).

    [10] 10崔奇, 张均红, 刘德林. 加速度计悬丝断裂分析[J]. 失效分析与预防, 2010, 5(1): 52-55. doi: 10.3969/j.issn.1673-6214.2010.01.0013CUIQ, ZHANGJ H, LIUD L. Fracture analysis of suspension wire in accelerometer[J]. Failure Analysis and Prevention, 2010, 5(1): 52-55. (in Chinese). doi: 10.3969/j.issn.1673-6214.2010.01.0013

    [11] 11任同群, 钱志龙, 徐龙, 等. 悬丝摆式加速度计摆组件自动装配系统[J]. 光学 精密工程, 2021, 29(7): 1609-1619. doi: 10.37188/OPE.20212907.1609RENT Q, QIANZ L, XUL, et al. Automatic assembly system for pendulum components of wire suspended pendulum accelerometer[J]. Opt. Precision Eng., 2021, 29(7): 1609-1619. (in Chinese). doi: 10.37188/OPE.20212907.1609

    [12] Y LUO, M Y CHEN, X D WANG et al. Precision assembly system based on position-orientation decoupling design, 685-688(22).

    [13] 13张培玉, 武国英, 郝一龙, 等. 微夹钳研究的进展与展望[J]. 光学 精密工程, 2000, 8(3): 292-296. doi: 10.3321/j.issn:1004-924X.2000.03.022ZHANGP Y, WUG Y, HAOY L, et al. Development of microgripper technology[J]. Opt. Precision Eng., 2000, 8(3)292-296(in Chinese). doi: 10.3321/j.issn:1004-924X.2000.03.022

    [14] 14蔡钧达,江慧萍. 锡焊质量与焊接温度的研究[J]. 电子工艺技术, 1982,(1): 27-34.CAIJ D, JIANGH P. Study of solder quality and soldering temperature[J]. Electronic Process Technology, 1982,(1): 27-34. (in Chinese)

    [15] 15张焕良. 锡焊机器人加热技术研究[D]. 哈尔滨: 哈尔滨工业大学, 2013. doi: 10.25103/jestr.063.20ZHANGH L. Research on Heating Technology of Soldering Robot[D]. Harbin: Harbin Institute of Technology, 2013. (in Chinese). doi: 10.25103/jestr.063.20

    [16] 16余柏南. 一种锡焊机匀速送丝电路的设计[J]. 电子科技, 2010, 23(8): 87-89. doi: 10.3969/j.issn.1007-7820.2010.08.027YUB N. Design of wire feed circuit with uniform speed for a soldering machine[J]. Electronic Science and Technology, 2010, 23(8): 87-89. (in Chinese). doi: 10.3969/j.issn.1007-7820.2010.08.027

    Tongqun REN, Yongsheng SANG, Rungu CAO, Han WU, Xiaodong WANG. Automatic assembly and welding control of base components of suspended pendulum accelerometer[J]. Optics and Precision Engineering, 2023, 31(16): 2395
    Download Citation