To address the characteristic of uneven surface temperature of hollow brick wall,the present research adopts soft wares of both ThermaCAM P20 and ThermaCAM Reporter to test the application of infrared thermal image technique in measuring surface temperature of hollow brick wall,and further analyzes the thermal characteristics of hollow brick wall,and building material’s impact on surface temperature distribution including hollow brick,masonry mortar,and so on.The research selects the construction site of a three-story-high residential,carries out the heat transfer experiment,and further examines the exterior wall constructed by 3 different hollow bricks including sintering shale hollow brick,masonry mortar and brick masonry.Infrared thermal image maps are collected,including 3 kinds of sintering shale hollow brick walls under indoor heating in winter;and temperature data of wall surface,and uniformity and frequency distribution are also collected for comparative analysis between 2 hollow bricks and 2 kinds of mortar masonry.The results show that improving heat preservation of hollow brick and masonry mortar can effectively improve inner wall surface temperature and indoor thermal environment;non-uniformity of surface temperature decreases from 0.6 to 0.4 ℃,and surface temperature frequency distribution changes from the asymmetric distribution into a normal distribution under the condition that energy-saving sintering shale hollow brick wall is constructed by thermal mortar replacing cement mortar masonry;frequency of average temperature increases as uniformity of surface temperature increases.This research provides a certain basis for promotion and optimization of hollow brick wall's thermal function.