• Acta Physica Sinica
  • Vol. 68, Issue 11, 110501-1 (2019)
Kun-Ying Li1、2, Pu Li1、2、3、4、5、*, Xiao-Min Guo1、2, Yan-Qiang Guo1、2, Jian-Guo Zhang1、2, Yi-Ming Liu4、5, Bing-Jie Xu4、5, and Yun-Cai Wang1、2
Author Affiliations
  • 1Key Laboratory of Advanced Transducers and Intelligent Control System, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, China
  • 2College of Physics and Optoelectronics, Taiyuan University of Technology, Taiyuan 030024, China
  • 3Key Laboratory of Specialty Fiber Optics and Optical Access Networks, Shanghai University, Shanghai 200444, China
  • 4No.30 Institute of China Electronic Technology Corporation, Chengdu 610041, China
  • 5Science and Technology on Communication Laboratory, Institute of Southwestern Communication, Chengdu 610041, China
  • show less
    DOI: 10.7498/aps.68.20190171 Cite this Article
    Kun-Ying Li, Pu Li, Xiao-Min Guo, Yan-Qiang Guo, Jian-Guo Zhang, Yi-Ming Liu, Bing-Jie Xu, Yun-Cai Wang. Flat chaos generated by optical feedback multi-mode laser with filter[J]. Acta Physica Sinica, 2019, 68(11): 110501-1 Copy Citation Text show less

    Abstract

    Optical chaos has a wide range of applications in communications, such as secure communication, high-resolution lidar ranging, optical time domain reflectometer, and high-rate physical random bit generator.

    In recent years, external-cavity feedback semiconductor lasers (ECLs) are the most common chaotic laser generation systems due to their characteristics of wide bandwidth, large amplitude, and simple structure, and the dynamic characteristics of chaotic signals have attracted much attention. However, limited by the relaxation oscillation of the laser, the energy of the chaotic signal directly generated by ECL is mainly concentrated at high relaxation oscillation frequency. Thus, the low-frequency component encounters the problem of energy loss.

    In practical applications, the signal detection/acquisition device usually responds to a 3-dB low-pass filtering characteristic. Therefore, the available effective bandwidth of the chaotic signal should actually be 3-dB bandwidth. The lack of low-frequency components will limit the energy utilization rate of chaotic signals and restrict the relevant performances of chaotic applications (such as reliability and transmission of chaotic secure communication, randomness and generation rate of physical random bits, measurement accuracy and range of lidar ranging or optical time-domain reflectometer).

    In the paper, we propose a broadband chaos generation scheme with simple structure and losing no low-frequency components. Specifically, we experimentally analyze the radio frequency (RF) spectra of the single-mode and the multi-mode output from an optical feedback Fabry-Perot (FP) semiconductor laser after and before filtering. The experimental results show that comparing with the multi-mode chaotic signal, the low-frequency energy of the single-mode chaotic spectrum is enhanced by 25 dB, and the 3-dB bandwidth of the single-mode chaotic signal can reach 6 GHz. Further theoretical analysis demonstrates that the enhancement of low-frequency component in the single-mode chaotic signal is caused by the mode-competing in multi-mode laser. It is concluded that this method can well solve the problem of low-frequency energy loss in conventional optical feedback chaotic systems, and is beneficial to improving the energy utilization rate of chaotic signals, which is of great significance for improving the performance of chaotic secure communication, random bit generation, lidar ranging, optical time domain reflectometer, and other relevant applications.

    Kun-Ying Li, Pu Li, Xiao-Min Guo, Yan-Qiang Guo, Jian-Guo Zhang, Yi-Ming Liu, Bing-Jie Xu, Yun-Cai Wang. Flat chaos generated by optical feedback multi-mode laser with filter[J]. Acta Physica Sinica, 2019, 68(11): 110501-1
    Download Citation