• Chinese Journal of Lasers
  • Vol. 36, Issue s2, 231 (2009)
Xu Xiaomei* and Hu Hong
Author Affiliations
  • [in Chinese]
  • show less
    DOI: 10.3788/cjl200936s2.0231 Cite this Article Set citation alerts
    Xu Xiaomei, Hu Hong. Surface Roughness Measurement Based on Laser Speckle and Neural Network[J]. Chinese Journal of Lasers, 2009, 36(s2): 231 Copy Citation Text show less
    References

    [1] N. Metchkarov,V. Sainov,P. Boone. High-accuracy surface measurement using laser-diode phase-stepping interferometry[J]. Vacuum,2000,58(2-3):464-469

    [2] M. Zecchino. High speed surface measurement with lateral scanning white light Interferometry[J]. Veeco Instruments Inc.,2002

    [3] Dai Rong,Xie Tiebang,Chang Suping. A vertical scanning white-light interfering profilometer[J]. Optical Technique,2006,32(4):545-548

    [4] You Zheng,Tian Yu,Zhang Enyao. Research on optical heterodyne interference fiber surface roughness sensor[J]. Optical Technology,1994,20(6):45-47

    [5] Zhang Xifang,Wang Zhengping,Wang Xiaozhong et al.. A method of measuring roughness of fine surfaces using interferometry principle of co-optical paths[J]. Optics & Optoelectronic Technology,2006,4(5):74-76

    [6] Hou Haihong,Hong Ruijin,Zhang Dongping et al.. Total integrated scatterometer for measuring the microroughness of optical thin films[J]. Chinese J. Lasers,2005,32(9):1258-1261

    [7] Pan Yongqiang,Wu Zhensen,Hang Lingxia. Optical thin films interfaces roughness cross-correlated properties and light scattering[J]. Chinese J. Lasers,2008,35(6):916-920

    [8] H. Ragheb,E. R. Hancock. The modified Beckmann-Kirchhoff scattering theory for rough surface analysis[J]. Pattern Recognition,2007,40(7):2004-2020

    [9] R. K. Erf. Speckle Metrology (Principles & Applications)[M].He Zemin,He Mingxia Transl. Beijing:China Machine Press,1989. 290-323

    [10] Liu Hengbiao,Chi Jingchun. Analysis of affecting factors on surface roughness measurement based on polychromatic speckle elongation[J]. Acta Optica Sinica,2008,28(2):279-284

    [11] H. Y. Kim,Y. F. Shen,J. H. Ahn. Development of a surface roughness measurement system using reflected laser beam[J]. J. Mater. Process. Tech.,2002,130-131:662-667

    [12] L. Basano,S. Leporatti,P. Ottonello et al.. Measurement of surface roughness:use of a CCD camera to correlate doubly scattered speckle patterns[J]. Appl. Optics,1995,34(31):7286-7290

    [13] Zhou Lili,Zhao Xuezeng. Recognition method of surface roughness based on speckle image[C]. Proceedings of the Second International Symposium on Instrumentation Science and Technology,2002,3:214-218

    [14] U. Persson. Real time measurement of surface roughness on ground surface using speckle-contrast technique[J]. Opt. Laser Eng.,1992,17(2):61-67

    [15] V. M. Rivas,J. J. Merelo,P. A. Castillo et al.. Evolving RBF neural networks for time-series forecasting with EvRBF[J]. Inform Scienecs,2004,165(3-4):207-220

    [16] Z. H. Xiao,Z. X. Zhang. Computerized system for on-line treating with failure parameter using RBF neural network[C]. International Conference on Machine Learning and Cybernetics,2003,(1-5):731-735

    [17] Bi Tianshu,Ni Yixin,Wu Fuli et al.. A novel neural network approach for fault section estimation[C]. Proceedings of the CSEE,2002,22(2):73-78

    [18] X. Zheng,T. L. Chen. Nonlinear time series forecast using radial basis function neural networks[J]. Commun. Theor. Phys.,2003,40(2):165-168

    [19] D. Gavrilis,E. Dermatas. Real-time detection of distributed denial-of-service attacks using RBF networks and statistical features[J]. Comput Netw,2005,48(2):235-245

    [20] Xu Xiaomei. Study of Surface Roughness Measurement Technique Based on Neural Network and Laser Speckle[D]. Harbin:Harbin Institute of Technology,2005. 23-33

    [21] Cao Maosen,Ren Qingwen,Li Ni. Model construction based on RBF net work for bearing capacity of compound foundation with deep mixing pile[J]. J. Shandong Institute of Architecture and Engineering,2003,18(2):15-20

    CLP Journals

    [1] Yang Wenchao, Chao Mingju, Sun Yanmin, Yang Ning, Tian Deyu. In-Situ Synthesis of WB-CrB Reinforced Ni-Based Coatings by Laser Cladding[J]. Laser & Optoelectronics Progress, 2010, 47(8): 81403

    [2] Li Mingyu, Chao Mingju, Liang Erjun, Zhang Junji, Li Dechuan. Investigation on Laser Surface Modification of Copper[J]. Chinese Journal of Lasers, 2011, 38(8): 803001

    [3] Li Zhiyuan, Zhao Weiyi, Gu Wenquan, He Hao, Zhang Jianbo, Nie Dengpan. Effect of Ti on Microstructure and Properties of Co-Based Alloy Coating by Laser Cladding[J]. Chinese Journal of Lasers, 2010, 37(8): 2086

    [4] Li Fuquan, Han Wei, Wang Fang, Zhang Xiaomin, Wei Xiaofeng, Feng Bin, Xiang Yong, Jia Huaiting, Li Keyu. Research Status of Final Optics Assembly in High-Power Laser Facility[J]. Laser & Optoelectronics Progress, 2013, 50(6): 60002

    [5] Wang Chuanqi, Liu Hongxi, Zhou Rong, Jiang Yehua, Zhang Xiaowei. Effect of Tempering on Microstructure and Wear Resistance of Laser Cladding Ni-Base Reinforced Particles Composite Coating[J]. Chinese Journal of Lasers, 2012, 39(10): 1003006

    [6] Xue Minpeng, Han Bin, Wang Yong, Liu Xingguang. Microstructures and Corrosion Resistance Properties of Ni-Based WC/Cr3C2 Coating Prepared by Laser Cladding[J]. Laser & Optoelectronics Progress, 2011, 48(9): 91403

    [7] Wang Xiaorong, Wang Xinhong, Shi Guowen, Xu Xiaokuai. Effect of Boron Element on the Microstructure and Property of Laser Cladding Fe-Ti-V-C Alloy System[J]. Chinese Journal of Lasers, 2010, 37(7): 1903

    Xu Xiaomei, Hu Hong. Surface Roughness Measurement Based on Laser Speckle and Neural Network[J]. Chinese Journal of Lasers, 2009, 36(s2): 231
    Download Citation