[1] Xing Chen, Dafu Cui, Changchun Liu et al.. Microfabrication and characterization of porous channels for DNA purification［J］. J. Micromech. Microengng, 2007, 17(1): 68～75

[2] P. J. Obeid, T. K. Christopoulos, H. J. Crabtree et al.. Microfabricated device for DNA and RNA amplification by continuous-flow polymerase chain reaction and reverse transcription-polymerase chain reaction with cycle number selection［J］. Anal. Chem., 2003, 75(2): 288～295

[3] I. Schneegaβ, R. Brutigam, J. M. Khler. Miniaturized flow-through PCR with different template types in a silicon chip thermocycler［J］. Lab. Chip., 2001, 1(1): 42～49

[4] S. F. Li, D. Y. Fozdar, M. F. Ali et al.. A continuous-flow polymerase chain reaction microchip with regional velocity control［J］. J. Microelectromech. Syst., 2006, 15(1): 223～236

[5] J. Felbel, A. Reichert, M. Kielpinski et al.. Reverse transcription-polymerase chain reaction (RT-PCR) in flow-through micro-reactors: thermal and fluidic concepts［J］. Chem. Engng. J., 2008, 135(s1): 298～302

[6] A. Gerlach, G. Knebel, A. E. Guber et al.. Microfabrication of single-use plastic microfluidic devices for high-throughput screening and DNA analysis［J］. Microsyst. Technol., 2002, 7(5-6): 265～268

[7] M. Hashimoto, P. C. Chen, M. W. Mitchell et al.. Rapid PCR in a continuous flow device［J］. Lab. Chip., 2004, 4(6): 638～645

[8] O. Rtting, W. Ropke, H. Becker et al.. Polymer microfabrication technologies［J］. Microsyst. Technol., 2002, 8(1): 32～36

[9] A. Costela, I. Garciamoreno, F. Florido et al.. Laser ablation of polymeric materials at 157 nm［J］. J. Appl. Phys., 1995, 77(6): 2343～2350

[10] W. Menz, J. Mohr, O. Paul. Micro Systems Technology［M］. Wang Chunhai, Yu Jie. Transl.. Beijing: Chemical Industry Publisher, 2003

[11] Qi Heng, Yao Liying, Wang Tong et al.. Excimer laser micromachining of PMMA based on PCR microfluidic biologic chip［J］. Microfabrication Technology, 2006, (1): 16～19

[12] Qi Heng, Wang Xiansong, Chen Tao et al.. Fabrication and application of PMMA continuous-flow PCR microfluidic chip with CO2 laser direct-writing ablation micromachining technique［J］. Chinese J. Lasers, 2009, 36(5): 1239～1245

[13] Wang Qingyue, Zhang Guoxiong, Ni Xiaochang et al.. Micro and nano processing technology of femtosecond laser［C］. Chinese Annual Meeting of Mechanical Engineering Society, 2003

[14] Fu Jianzhong, Xiang Hengfu, Chen Zichen. Modeling research of CO2 laser direct writing polymer microfluidic chip［J］. Chemical Journal of Chinese Universities, 2004, 25(s1): 54～56

[15] D. J. Yuan, S. Das. Experimental and theoretical analysis of direct-write laser micromachining of polymethyl metbacrylate by CO2 laser ablation［J］. J. Appl. Phys., 2007, 101(2): 024904

[16] S. G. Kandlinkar, S. Joshi, S. Tian. Effect of channel roughness on heat transfer and fluid flow characteristics at low Reynolds numbers in small diameter tubes［C］. Proc. of 35th National Heat Transfer Conference, 2001.1609～1618

[17] D. Pfund, D. Retor, A. Shekarriz et al.. Pressure drop measurements in a microchannel［J］. AIChE J., 2000, 46(8): 1496～1507