Voltage measurement for 4 MV induction voltage adder

Bing Wei; Fan Guo; Junjun Kang; Lidong Geng; Yong Li; Minghe Xia

doi:10.11884/HPLPB202335.230168

[1] Xie Weiping, Xia Minghe, Guo Fan, et al. Design and performance of a pulsed power-driven X-ray source for flash radiography[J]. Physical Review Accelerators and Beams, 24, 110401(2021).

[2] Guo Fan. Design perfmance of the induction cavities system f an induction voltage adder[D]. Hefei: University of Science Technology of China, 2019: 108120

[3] Guo Fan, Zou Wenkang, Gong Boyi, et al. Modeling power flow in the induction cavity with a two dimensional circuit simulation[J]. Physical Review Accelerators and Beams, 20, 020401(2017).

[4] Smith I D. Induction voltage adders and the induction accelerator family[J]. Physical Review Accelerators and Beams, 7, 064801(2004).

[5] Ormond E C, Cordova S R, Molina I, et al. Cygnus diverter switch analysis[J]. IEEE Transactions on Plasma Science, 36, 2554-2559(2008).

[6] Wagoner T C, Stygar W A, Ives H C, et al. Differential-output B-dot and D-dot monitors for current and voltage measurements on a 20-MA, 3-MV pulsed-power accelerator[J]. Physical Review Accelerators and Beams, 11, 100401(2008).

[7] Wei Bing, Fu Zhen, Wang Yujuan, . Design and performance of capacitive divider for high-voltage pulse measurement[J]. High Voltage Engineering, 33, 39-43(2007).

[8] Wang Liangping, Guo Ning, Li Yan, . Capacitive divider for voltage measurement of diode load on Qiangguang-I accelerator[J]. High Power Laser and Particle Beams, 22, 696-700(2010).

[9] Ding Weidong, Li Feng, Zhang Qiaogen, . Calibration of the capacitive sensor used in the very fast transient overvoltage measurement of ultra high voltage gas insulated switchgear[J]. Proceedings of the CSEE, 31, 56-65(2011).

[10] Hu Yixiang, Guo Ning, Han Juanjuan. Self-integral capacitance divider used for voltage measurement along magnetically insulated transmission lines[J]. High Power Laser and Particle Beams, 25, 1839-1844(2013).

[11] Wei Bing, Fang Dongfan, Qing Yanling, . D-dot monitor for sub-nanosecond high voltage pulse measurement[J]. High Power Laser and Particle Beams, 24, 1497-1501(2012).

[12] Wei Bing, Qing Yanling, Feng Shuping, . Current measurement for a four level magnetically-insulated transmission line[J]. High Power Laser and Particle Beams, 26, 085002(2014).

[13] Huiskamp T, Beckers F J C M, Van Heesch E J M, et al. B-dot and D-dot sensors for (sub)nanosecond high-voltage and high-current pulse measurements[J]. IEEE Sensors Journal, 16, 3792-3801(2016).

[14] Wei Bing, Guo Fan, Li Yong, et al. Characteristics of the D-dot sensor for measurement of high voltage pulse of a water-insulated transmission line[J]. IEEE Sensors Journal, 23, 2385-2392(2023).

[15] Shanghai Huaxiang Computer Communication Engineering Co. Ltd Integrat[JOL]. http:www.shxsh.comupfiles2019628134336192.pdf.

[16] Oliver B V, Berninger M, Cooperstein G, et al. acterization of the rodpinch diode Xray source on Cygnus[C]2009 IEEE Pulsed Power Conference. 2009: 1116.