[1] SAUVE G, VAN ACKER K. The environmental impacts of municipal solid waste landfills in Europe: a life cycle assessment of proper reference cases to support decision making［J］. Journal of Environmental Management, 2020, 261: 110216.
[2] ZHANG J J, ZHANG S G, LIU B. Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: a review［J］. Journal of Cleaner Production, 2020, 250: 119507.
[3] LUO Y F, WU Y G, SHU J, et al. Effect of particulate organic matter fractions on the distribution of heavy metals with aided phytostabilization at a zinc smelting waste slag site［J］. Environmental Pollution, 2019, 253: 330-341.
[4] CHEN S S, HUANG J L, XIAO T T, et al. Carbon emissions under different domestic waste treatment modes induced by garbage classification: case study in pilot communities in Shanghai［J］. Science of the Total Environment, 2020, 717: 137193.
[5] LI X G, LIU Z L, LV Y, et al. Utilization of municipal solid waste incineration bottom ash in autoclaved aerated concrete［J］. Construction and Building Materials, 2018, 178: 175-182.
[6] KUO W T, LIU C C, SU D S. Use of washed municipal solid waste incinerator bottom ash in pervious concrete［J］. Cement and Concrete Composites, 2013, 37: 328-335.
[7] NAZARI A, RIAHI S. Effects of CuO nanoparticles on microstructure, physical, mechanical and thermal properties of self-compacting cementitious composites［J］. Journal of Materials Science & Technology, 2011, 27(1): 81-92.
[9] GUPTA N, KLUGE M, CHADIK P A, et al. Recycled concrete aggregate as road base: leaching constituents and neutralization by soil Interactions and dilution［J］. Waste Management, 2018, 72: 354-361.
[10] VAN DEN HEEDE P, RINGOOT N, BEIRNAERT A, et al. Sustainable high quality recycling of aggregates from waste-to-energy, treated in a wet bottom ash processing installation, for use in concrete products［J］. Materials, 2015, 9(1): 9.
[11] RONG Z D, WANG Y L, WU S P. Dynamic compression behavior of ultra-high performance cement-based composite with hybrid steel fiber reinforcements［J］. Journal of Wuhan University of Technology-Mater Sci Ed, 2020, 35(5): 900-907.
[12] GHAFARI E, GHAHARI S A, COSTA H, et al. Effect of supplementary cementitious materials on autogenous shrinkage of ultra-high performance concrete［J］. Construction and Building Materials, 2016, 127: 43-48.
[13] ALSALMAN A, DANG C N, MICAH HALE W. Development of ultra-high performance concrete with locally available materials［J］. Construction and Building Materials, 2017, 133: 135-145.
[14] WANG X P, YU R, SHUI Z H, et al. Mix design and characteristics evaluation of an eco-friendly ultra-high performance concrete incorporating recycled coral based materials［J］. Journal of Cleaner Production, 2017, 165: 70-80.
[15] ZHAO S J, FAN J J, SUN W. Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete［J］. Construction and Building Materials, 2014, 50: 540-548.
[16] WANG X P, YU R, SHUI Z H, et al. Optimized treatment of recycled construction and demolition waste in developing sustainable ultra-high performance concrete［J］. Journal of Cleaner Production, 2019, 221: 805-816.
[17] YANG R, YU R, SHUI Z H, et al. Environmental and economical friendly ultra-high performance-concrete incorporating appropriate quarry-stone powders［J］. Journal of Cleaner Production, 2020, 260: 121112.
[18] CWIRZEN A, PENTTALA V, VORNANEN C. Reactive powder based concretes: mechanical properties, durability and hybrid use with OPC［J］. Cement and Concrete Research, 2008, 38(10): 1217-1226.
[19] YU R, SPIESZ P, BROUWERS H J H. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)［J］. Cement and Concrete Research, 2014, 56: 29-39.
[20] MEHDIPOUR I, KHAYAT K H. Effect of particle-size distribution and specific surface area of different binder systems on packing density and flow characteristics of cement paste［J］. Cement and Concrete Composites, 2017, 78: 120-131.
[21] YU Q L, SPIESZ P, BROUWERS H J H. Ultra-lightweight concrete: conceptual design and performance evaluation［J］. Cement and Concrete Composites, 2015, 61: 18-28.
[23] YANG R, YU R, SHUI Z H, et al. The physical and chemical impact of manufactured sand as a partial replacement material in ultra-high performance concrete (UHPC)［J］. Cement and Concrete Composites, 2019, 99: 203-213.
[24] KREJSOV J, DOLEELOV M, PERNICOV R, et al. The influence of different aggregates on the behavior and properties of gypsum mortars［J］. Cement and Concrete Composites, 2018, 92: 188-197.
[25] KASU S R, DEB S, MITRA N, et al. Influence of aggregate size on flexural fatigue response of concrete［J］. Construction and Building Materials, 2019, 229: 116922.
[26] LI Y, TENG N, LIU R Q, et al. Effect of particle size distribution of slag on the strength and pore structure of low-temperature concrete［J］. IOP Conference Series: Materials Science and Engineering, 2019, 587(1): 012008.
[27] WANG X Y, CUI X J, ZHAO Y L, et al. Nano-bio interactions: the implication of size-dependent biological effects of nanomaterials［J］. Science China Life Sciences, 2020, 63(8): 1168-1182.
