[1] J. W. Lee. Inertia friction welding of a gas turbine rotor[J]. Welding Review International, 1992, 11(4): 189～192
[2] Zhong Minlin, Sun Hongqing, Wenjin Liu et al..Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy[J]. Scripta Materialia, 2005, 53(2): 159～164
[3] Xiong Jiangang, Hu Xiyuan, Chen Zutao et al.. Study on laser welding of cast nickel-base superalloy[J]. Chinese J. Lasers, 1996, A23(12): 1107～1111
[4] Pang Ming, Yu Gang, Liu Zhao et al.. Dissimilar metal of K418 and 42CrMo full penetration laser welding[J]. Chinese J. Lasers, 2006, 33(8): 1122～1126
[5] Du Suigeng, Fu Li, Cao Ying et al.. Strengthening of the friction welding joint between K418 turbo disk and 42CrMo shaft[J]. Journal of Northwestern Polytechnical University, 2004, 22(1): 112～115
[6] Sun Tongkun. Experimental research on laser welding of 1 mm steel sheet[J]. Chinese J. Lasers, 1993, A20(12): 936～939
[7] Yu Gang, Zhao Shusen, Zhang Yongjie et al.. Research on key Lssues of laser welding of dissimilar metal[J]. Chinese J. Lasers, 2009, 36(2): 261～268
[8] Li Liqun, Chen Yanbin, Tao Wang. Research on dual-beam welding characteristics of aluminum alloy[J]. Chinese J. Lasers, 2008, 35(11): 1783～1788
[9] Xu Lianghong, Tian Zhiling, Peng Yun et al.. Microstructure and mechanical properties of high strength aluminum alloy laser welds[J]. Chinese J. Lasers, 2008, 35(3):456～461
[10] Wei Huakai, Sun Fujuan. Technology of laser welding on Al-Mg-Sc and 2A12[J]. Chinese J. Lasers, 2008, 35(10): 1615～1618
[11] Sun Fujuan, Liu Hongjun, Hu Fangyou. Effect of laser surface remelting on performance of LY12CZ[J]. Chinese J. Lasers, 2007, 34(8): 1159～1162
[12] Zhang Shenghai, Chen Kai, Xiao Rongshi et al.. High power CO2 laser powder welding of aluminum alloy[J]. Chinese J. Lasers, 2006, 33(5): 714～718
[13] Pang Ming, Zheng Caiyun, Wang Lixin et al.. Deep penetration laser welding dissimilar metal of K418 and 42CrMo[J]. Transactions of the China Welding Institution, 2007, 28(9): 83～86
[14] Pang Ming, Yu Gang, Wang Henghai et al.. Microstructure and mechanical properties of K418 and 42CrMo dissimilar metal laser welding[J]. Transactions of the China Welding Institution, 2008, 29(2): 85～88
[15] Liu Xiubo, Pang Ming, Huang Jianguo et al.. Transmission electron microscopy characterization of laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft[J]. Journal of Alloys and Compounds, 2008, 461(1～2): 648～653
