[1] ShungK. K.,CannataJ. M. andZhouQ. F.,Piezoelectric materials for high frequency medical imaging applications: A review,J. Electroceramics19,139(2007).
[2] VijayaM. S.,Piezoelectric Materials and Devices: Applications in Engineering and Medical Sciences (CRC Press, Boca Raton,2012).
[3] ElahiH.et al.,A review on applications of piezoelectric materials in aerospace industry,Integr. Ferroelectr.211,25(2020).
[4] GrippJ. A. B. andRadeD. A.,Vibration and noise control using shunted piezoelectric transducers: A review,Mech. Syst. Signal Process112,359(2018).
[5] WangL.-P.et al.,Design, fabrication, and measurement of high-sensitivity piezoelectric microelectromechanical systems accelerometers,J. Microelectromech. Syst.12,433(2003).
[6] BrownjohnJ. M. W.,Structural health monitoring of civil infrastructure,Phil. Trans. R. Soc. A365,589(2007).
[7] GeisS.,LöbmannP.,SeifertS. andFrickeJ.,Dielectric properties of PZT aerogels,Ferroelectrics241,75(2000).
[8] SmithW. A.,The role of piezocomposites in ultrasonic transducers, inProc. IEEE Ultrasonics Symp.(Montreal, QC, Canada,1989), Vol.2, pp. 755–766.
[9] DellaC. N. andShuD.,The performance of 1–3 piezoelectric composites with a porous non-piezoelectric matrix,Acta Mater.56,754(2008).
[10] HikitaK.,YamadaK.,NishiokaM. andOnoM.,Piezoelectric properties of the porous PZT and the porous PZT composite with silicone rubber,Ferroelectrics49,265(1983).
[11] BastU. andWersingW.,The influence of internal voids with 3–1 connectivity on the properties of piezoelectric ceramics prepared by a new planar process,Ferroelectrics94,229(1989).
[12] BowenC. R.,PerryA.,LewisA. C. F. andKaraH.,Processing and properties of porous piezoelectric materials with high hydrostatic figures of merit,J. Eur. Ceram. Soc.24,541(2004).
[13] MehtaK. andVirkarA. V.,Fracture mechanisms in ferroelectric-ferroelastic lead zirconate titanate (Zr: Ti= 0.54: 0.46) ceramics,J. Am. Ceram. Soc.73,567(1990).
[14] YoonS.-J.,MoonJ. H. andKimH.-J.,Piezoelectric and mechanical properties of Pb (Zr 0.52 Ti 0.48) O 3–Pb (Y 2/3 W 1/3) O 3 (PZT–PYW) ceramics,J. Mater. Sci.32,779(1997).
[15] LiuW.,LiN.,WangY.,XuH.,WangJ. andYangJ.,Preparation and properties of 3–1 type PZT ceramics by a self-organization method,J. Eur. Ceram. Soc.35,3467(2015).
[16] XiangP.-H.,DongX.-L.,ChenH.,ZhangZ. andGuoJ.-K.,Mechanical and electrical properties of small amount of oxides reinforced PZT ceramics,Ceram. Int.29,499(2003).
[17] XuT. andWangC.-A.,Piezoelectric properties of a pioneering 3-1 type PZT/epoxy composites based on freeze-casting processing,J. Am. Ceram. Soc.97,1511(2014).
[18] ZhangH. L.,LiJ. F. andZhangB. P.,Fabrication and evaluation of PZT/Ag composites and functionally graded piezoelectric actuator,J. Electroceram.16,413(2006).
[19] TakagiK.,LiJ.-F.,YokoyamaS. andWatanabeR.,Fabrication and evaluation of PZT/Pt piezoelectric composites and functionally graded actuators,J. Eur. Ceram. Soc.23,1577(2003).
[20] LiJ.et al.,Fabrication and evaluation of porous piezoelectric ceramics and porosity–graded piezoelectric actuators,J. Am. Ceram. Soc.86,1094(2003).
[21] HorikiriK.,YanasekoT.,KubokiI.,SatoH. andAsanumaH.,Development of surface oxidized metal fiber/piezoelectric ceramics/aluminum composite,Mech. Eng. J.6,18-00556(2019).
[22] YanasekoT.,AsanumaH. andSatoH.,Characterization of a metal-core piezoelectric ceramics fiber/aluminum composite,Mech. Eng. J.14,14-00357(2015).
[23] YanasekoT.,KubokiI.,SatoH. andAsanumaH.,Investigation of fabrication condition of metal matrix piezoelectric composite using surface oxidized metal fiber as internal electrode,Proc. Int. Conf. Leading Edge Manufacturing/Materials and Processing, LEMP2020,8576(2021).
[24] RybyanetsA. N. andNaumenkoA. A.,Nanoparticles transport in ceramic matries: A novel approach for ceramic matrix composites fabrication,J. Mod. Phys.4,1041(2013).
[25] RybyanetsA. N.,ShvetsovI. A.,LugovayaM. A.,PetrovaE. I. andShvetsovaN. A.,Nanoparticles transport using polymeric nano- and microgranules: Novel approach for advanced material design and medical applications,J. Nano-Electron. Phys.10,02005(2018).
[26] NasedkinA. andNassarM. E.,Effective properties of a porous inhomogeneously polarized by direction piezoceramic material with full metalized pore boundaries: Finite element analysis,J. Adv. Dielectr.10,2050018(2020).
[27] NewnhamR. E.,SkinnerD. P. andCrossL. E.,Connectivity and piezoelectric-pyroelectric composites,Mater. Res. Bull.13,525(1978).
[28] Martínez-AyusoG.,FriswellM. I.,AdhikariS.,KhodaparastH. H. andBergerH.,Homogenization of porous piezoelectric materials,Int. J. Solids Struct.113–114,218(2017).
[29] BergerH.et al.,An analytical and numerical approach for calculating effective material coefficients of piezoelectric fiber composites,Int. J. Solids Struct.42,5692(2005).
[30] NasedkinA. V.,NasedkinaA. A. andNassarM. E.,Homogenization of porous piezocomposites with extreme properties at pore boundaries by effective moduli method,Mech. Solids55,827(2020).
[31] NasedkinA. V. andShevtsovaM. S.,Improved finite element approaches for modeling of porous piezocomposite materials with different connectivity, inFerroelectrics and Superconductors: Properties and Applications, ed. Parinov I. A.,Chap. 7(Nova Science Publishers,New York,2011), pp. 231–254.
[32] NasedkinA. V. andShevtsovaM. S.,Multiscale computer simulation of piezoelectric devices with elements from porous piezoceramics, inPhysics and Mechanics of new Materials and their Applications, eds. Parinov I. A. and Chang S.-H., Chap. 16(Nova Science Publishers,New York,2013), pp. 185–202.
[33] HoriM. andNemat-NasserS.,Universal bounds for effective piezoelectric moduli,Mech. Mater.30,1(1998).
[34] AboudiJ.,Mechanics of Composite Materials: A Unified Micromechanical Approach (Elsevier,Amsterdam,2013).
[35] DunnM. L. andTayaM.,Electromechanical properties of porous piezoelectric ceramics,J. Am. Ceram. Soc.76,1697(1993).
[36] IyerS. andVenkateshT. A.,Electromechanical response of porous piezoelectric materials: Effects of porosity connectivity,Appl. Phys. Lett.97,072904(2010).
[37] IyerS. andVenkateshT. A.,Electromechanical response of (3-0) porous piezoelectric materials: Effects of porosity shape,J. Appl. Phys.110,034109(2011).
[38] IyerS. andVenkateshT. A.,Electromechanical response of (3–0, 3–1) particulate, fibrous, and porous piezoelectric composites with anisotropic constituents: A model based on the homogenization method,Int. J. Solids Struct.51,1221(2014).
[39] DuH.,LinX.,ZhengH.,QuB.,HuangY. andChuD.,Colossal permittivity in percolative ceramic/metal dielectric composites,J. Alloys Compd.663,848(2016).
[40] RoscowJ. I.,BowenC. R. andAlmondD. P.,Breakdown in the case for materials with giant permittivity?,ACS Energy Lett.2,2264(2017).
[41] ANSI/IEEE Std, 176–1987. IEEE Standard on Piezoelectricity (IEEE, New York, 1987).