Study on Wear-Resistance and Scanning Path of Laser Alloying on End Cap Working Face

Li Shuyu; Tian Xinguo; Li Chengbiao

doi:10.3788/cjl201340.0203004

[1] Shen Xinrong, Li Zengzhen, Li Jiangli. Experimental investigation of an automatic flux compensation vale［J］. Fluid Machinery, 2006, 34(11): 4～7

[2] Cui Xiangpeng, Liu Qibin. Microstructure and corrosion resistance of laser alloying on 45 steel with chromium, molybdenum and boron［J］. China Surface Engineering, 2011, 24(2): 57～60

[3] K. F. Tam, F. T. Cheng, H. C. Man. Enhancement of cavitation erosion and corrosion resistance of brass by laser surface alloying with Ni-Cr-Si-B［J］. Surf. & Coat. Technol., 2002, 149(1): 36～44

[4] J. Duta Majumbar, A. Weisheit, B. L. Mordike et al.. Laser surface alloying of Ti with Si, Al and Si+Al for an improved oxidation resistance［J］. Mater. Sci. & Engng. A, 1999, 266(1-2): 123～134

[5] Li Da, Qian Ming, Jin Chang et al.. Laser alloying of magnesium alloy AZ91D with Al-Si powder and its corrosion performance［J］. Chinese J. Lasers, 2008, 35(9): 1395～1400

[6] Fan Ding, Dai Jingjie, Sun Yaoning et al.. Microstructure and property of TiC/Ti composite coating by laser surface alloying［J］. Journal of Lanzhou University of Technology, 2006, 32(4): 13～15

[7] Wang Liqin, Ying Lixia, Zhang Sanchuan et al.. Microstructure and performance of laser alloying Si3N4/graphite composite coating［J］. Chinese J. Lasers, 2003, 30(9): 855～858

[8] Zhang Youshou, Wang Wei, Wang Qinguo. Laser rapid remelting heat treatment and surface alloying of 1Cr18Ni9Ti austenitic stainless steel［J］. Journal of Optoelectronics·Laser, 2002, 13(1): 72～79

[9] Cui Zeqin, Wang Wenxian, Wu Hongliang et al.. Microstructure and wear resistance of AZ31B magnesium alloy by laser cladding with Al-Si/Al2O3-TiO2 powders［J］. Chinese J. Lasers, 2011, 38(6): 0603020

[10] Li Mingyu, Chao Mingju, Liang Erjun et al.. Investigation on laser surface modification of copper［J］. Chinese J. Lasers, 2011, 38(8): 0803001

[11] Sun Rongmin, Feng Shuqiang, Wen Zongyin et al.. Research on laser alloying processing of low-Ni-Cr infinite chilled cast iron roller［J］. Applied Laser, 2009, 29(6): 493～496

[12] Xu Changqing, Li Guijiang. Microstructure and wear resistance of TiC carbide-reinforced composite coating prepared by laser surface alloying［J］. Chinese J. Lasers, 2008, 35(11): 1770～1772

[13] Zhang Yongkang, Zhou Jianzhong, Ye Yunxia. Laser Processing Technology［M］. Beijing: Chemical Industry Press, 2004