Development of transmission target X-ray tube

Liang Zhou; Wenchuan Wang; Lin Zhou; Mingjia Li; Chuan Liang; Faqiang Zhang

doi:10.11884/HPLPB202032.190336

Journals >High Power Laser and Particle Beams >Volume 32 >Issue 2 >Page 025019 > Article

High Power Laser and Particle Beams
Vol. 32, Issue 2, 025019 (2020)

Development of transmission target X-ray tube

Liang Zhou^1、1, Wenchuan Wang^2、2, Lin Zhou^2、2, Mingjia Li^2、2, Chuan Liang^2、2、*, and Faqiang Zhang^2、2

Author Affiliations

¹Twelfth Institute, China Electronics Technology Group Corporation, Beijing 100015, China

²Institute of Nuclear Physics and Chemistry, CAEP, P.O. Box 919-212, Mianyang 621900, China

show less

DOI: 10.11884/HPLPB202032.190336 Cite this Article

Liang Zhou, Wenchuan Wang, Lin Zhou, Mingjia Li, Chuan Liang, Faqiang Zhang. Development of transmission target X-ray tube[J]. High Power Laser and Particle Beams, 2020, 32(2): 025019 Copy Citation Text

show less

Abstract

The X-ray tube is a key component of an X-ray source. An X-ray tube used for a compact nanosecond pulsed X-ray source is described in this paper. The X-ray tube is a sealed transmission target X-ray diode. Its cathode is acomb structure formed from thin tungsten sheets with thickness of 50 μm, while its target is made of a 100 μm-thick titanium film. The X-ray dose at a distance of 20 cm from the diode is 20 mR per pulse while the diode voltage is 512 kV. In this case, the full width at half maximum of the X-ray pulse is about 5 ns.

Keywords

cathode target transmission target X-ray tube

Liang Zhou, Wenchuan Wang, Lin Zhou, Mingjia Li, Chuan Liang, Faqiang Zhang. Development of transmission target X-ray tube[J]. High Power Laser and Particle Beams, 2020, 32(2): 025019

Download Citation

Tools

Save the article for my favorites

Paper Information