A Work-Piece Flatness Measuring Method Based on Fringe Projection Technology

LYU Baohua; WANG Peng; ZHOU Duo

doi:10.3969/j.issn.1671-637x.2021.06.023

[1] BALBO A R,BAPTISTA E C,ARENALES M N.An adaptation of the dual-affine interior point method for the surface flatness problem［J］.European Journal of Operational Research,2007,181(3): 1607-1616.

[2] HADISTEVIC＇ M,TRBAC B,JOKIC＇ V S,et al.Factors of estimating flatness error as a surface requirement of exploitation［J］.Metalurgija,2015,54(1):239-242.

[3] BARTKOWIAK T,STANIEK R.Application of order statistics in the evaluation of flatness error: sampling problem［C］//Proceedings of ASME 2017 International Mechanical Engineering Congress and Exposition,2017.doi:10.1115/IMECE2017-71295.

[4] YE R F,CUI C C,HUANG F G,et al.Minimum zone evaluation of flatness error using an adaptive iterative strategy for coordinate measuring machines data［J］.Advanced Materials Research,2012,472/473/474/475: 25-29.

[5] LI P,DING X M,TAN J B,et al.A hybrid method based on reduced constraint region and convex-hull edge for flatness error evaluation［J］.Precision Engineering,2016, 45: 168-175.

[6] RAGHUNANDAN R,RAO P V.Selection of sampling points for accurate evaluation of flatness error using coordinate measuring machine［J］.Journal of Materials Processing Technology,2008,202(1/2/3): 240-245.

[7] LEE G,MOU J,SHEN Y.Sampling strategy design for dimensional measurement of geometric features using coordinate measuring machine［J］.International Journal of Machine Tools and Manufacture,1997,37(7): 917-934.

[8] SPREITZHOFER G,DUEMMLER A,RIESS M,et al.SI-FLAT contactless flatness measurement for cold rolling mills and processing lines［J］.Revue De Métallurgie, 2005,102(9): 589-594.

[10] JIN S,LV Y,CHEN Q S.Optical fiber method for measuring small plane flatness error［C］//Optical Design and Testing III,SPIE,2007.doi:10.1117/12.757668.

[11] ZHU S P,FANG J C,ZHOU R,et al.A new noncontact flatness measuring system of large 2-D flat workpiece［J］.IEEE Transactions on Instrumentation and Mea-surement,2008,57(12): 2891-2904.

[12] QIU R S,WANG X L,PAN Y M.Rapid measurement method for small work-piece flatness error［J］.Applied Mechanics and Materials,2013,373/374/375: 790-794.

[13] WANG Q,KIM M K,SOHN H,et al.Surface flatness and distortion inspection of precast concrete elements using laser scanning technology［J］.Smart Structures and Systems,2016,18(3): 601-623.

[14] ZHANG X,OU J,YUAN Y,et al.Projection-aided videometric method for shape measurement of large-scale bulk material stockpile［J］.Applied Optics,2011,50(26): 5178-5184.

[15] OCHOA N A,MENDIOLA G,LANDGRAVE J E A.Flatness measurement using a grazing incidence interferometer［J］.Revista Mexicana de Fisica,2007,53(1):66-71.

[16] SHIMIZU Y,KIM W J,ITO S,et al.Form error characterization of reflective-type gratings［J］.Key Engineering Materials,2012,523/524: 859-864.

[17] SCHULZ M,EHRET G,KRˇEN P.High accuracy flatness metrology within the European Metrology Research Program［J］.Nuclear Instruments and Methods in Physics Research,Section A: Accelerators,Spectrometers,Detec-tors and Associated Equipment,2013,710: 37-41.

[18] BITOU Y,KONDO Y.High-lateral-resolution scanning deflectometric profiler using a commercially available autocollimator［J］.Measurement Science and Technology, 2014,25(9): 095202.

[19] MOONA G,SHARMA R,KIRAN U,et al.Evaluation of measurement uncertainty for absolute flatness measurement by using Fizeau interferometer with phase-shifting capability［J］.Mapan,2014,29(4): 261-267.

[20] KIM Y,HIBINO K,SUGITA N,et al.Design of the phase-shifting algorithm for flatness measurement of a mask blank glass［C］//Metrology,Inspection,and Process Control for Microlithography XXVIII.SPIE,2014.doi:10.1117/12.2045319.

[21] JIA X,XU F C,XIE W M,et al.Analysis of absolute flatness testing in sub-stitching interferometer［C］//Proceedings of SPIE,2016.doi:10.1117/12.2243462.

[22] ZUO C,FENG S J,HUANG L,et al.Phase shifting algorithms for fringe projection profilometry: a review［J］.Optics and Lasers in Engineering,2018,109: 23-59.

[23] DA F P,WANG X,HUANG H.Phase unwrapping using interlaced fringes for phase-shifting techniques［J］.IEEE Transactions on Instrumentation and Measurement,2011,60(9): 3185-3193.

[24] AREVALILLO-HERREZ M,VILLATORO F R, GDEISAT M A.A robust and simple measure for quality-guided 2D phase unwrapping algorithms［J］.IEEE Transactions on Image Processing,2016,25(6): 2601-2609.

[25] DING Y,XI J T,YU Y G,et al.Absolute phase recovery of three fringe patterns with selected spatial frequencies［J］.Optics and Lasers in Engineering,2015,70: 18-25.

[26] SUN C K,WANG T,WANG P.Unknown orientation views calibration for the improved Fourier transform profilometry［C］//Proceedings of SPIE,2009.doi:10.1117/12.806998.

[27] ZHANG Z.A flexible new technique for camera calibration［J］.IEEE Transactions on Pattern Analysis and Ma-chine Intelligence,2000,22(11): 1330-1334.

[28] FENG S J,ZHANG Y Z,CHEN Q,et al.General solution for high dynamic range three-dimensional shape mea-surement using the fringe projection technique［J］.Optics and Lasers in Engineering,2014,59: 56-71.

[29] ZHANG S,HUANG P S.Phase error compensation for a 3-D shape measurement system based on the phase-shifting method［J］.Optical Engineering,2007.doi:10.1117/1.2746814.