[1] FU M W,CHAN W L.A review on the state-of-the-art microforming technologies[J].International Journal of Advanced Manufacturing Technology,2012,67(9-12):2411-2437.

[2] SAOTOME Y,IWAZAKI H.Superplastic backward microextrusion of microparts for microelectromechanical systems[J].Journal of Materials Processing Technology,2001,119(1):307-311.

[3] VOLLERTSEN F,HU Z,NIEHOFF H S,et al..State of the art in micro forming and investigations into micro deep drawing[J].Journal of Materials Processing Technology,2004,151(1-3):70-79.

[4] SAOTOME Y,MIAW S,ZHANG T,et al..The micro-formability of Zr-based amorphous alloys in the supercooled liquid state and their application to micro-dies[J].Journal of Materials Processing Technology,2001,113(1):64-69.

[5] LIU H X,SHEN Z B,WANG X,et al..Micromould based laser shock embossing of thin metal sheets for MEMS applications[J].Applied Surface Science,2010,256(14):4687-4691.

[6] WANG X,ZHANG D,GU CH X,et al..Large area micro bending method by soft punch under laser shock wave based on multi-groove mold[J].Opt.Precision Eng.,2014,22(9):2292-2298.(in Chinese)

[7] WU D J,MA G Y,ZHOU Q J,et al..Experimental study of bending silicon chip with long pulse width laser[J].Opt.Precision Eng.,2007,15(9):1361-1365.(in Chinese)

[8] ZHOU J ZH,WEI D H,HUANG SH,et al..Microscale laser shock peening on TiN coatings[J].Opt.Precision Eng.,2011,19(11):2679-2684.(in Chinese)

[9] WANG X Y,XU W X,XU W J,et al..Simulation and experiment of laser bending of silicon sheet[J].Opt.Precision Eng.,2008,16(4):605-610.(in Chinese)

[10] YANG CH J,ZHOU J ZH,ZHANG Y K,et al..Study on calculation of minimum laser energy of sheet metal deformation by laser shock forming[J].Opt.Precision Eng.,2006,14(3):396-401.(in Chinese)

[11] LIU H X,YANG K,WANG Y,et al..Research on micro-forming experiment of metal foil under laser driven flyer loading method[J].Chinese J.Lasers,2009,36(5):1292-1295.(in Chinese)

[12] LIU H X,SHEN Z B,WANG X,et al..Numerical simulation and experimentation of a novel laser indirect shock forming[J].Journal of Applied Physics,2009,106(6):063107.

[13] LU M M,LIU H X,SHEN Z B,et al..Experiment and simulation of multihole micro-punching with complex layouts by laser-driven flyer[J].Chinese J.Lasers,2014,41(4):403004.(in Chinese)

[14] LIU H X,SHEN Z B,WANG X,et al..Feasibility investigations on a novel micro-embossing using laser-driven flyer[J].Optics & Laser Technology,2012,44(6):1987-1991.

[15] YANG CH J,YE ZH,LU J ZH,et al..Laser shock forming of SUS304 stainless steel sheet with elliptical spot[J].The International Journal of Advanced Manufacturing Technology,2011,56(9-12):987-993.

[16] LI J,GAO H,CHENG G J.Forming limit and fracture mode of microscale laser dynamic forming[J].Journal of Manufacturing Science and Engineering,2010,132(6):061005.

[17] GAO H,CHENG G J.Laser-induced high-strain-rate superplastic 3-D microforming of metallic thin films[J].Journal of Microelectromechanical Systems,2010,19(2):273-281.