Evaluation Method and Characteristics of Manufactured Sand Particle Shape

WU Jiale; SUN Jiangtao; ZHANG Wentao; WANG Lin; ZENG Chuntao; WU Wenzhen; ZHAO Li; WANG Yanan; SHEN Weiguo

[1] ZHENG X Y, LIU H H, YOU S J, et al. Cracking resistance and sustainability assessment of alkali-activated slag concrete incorporating lightweight aggregate［J］. Cement and Concrete Composites, 2022, 131: 104556.

[2] DIMITRIOU G, SAVVA P, PETROU M F. Enhancing mechanical and durability properties of recycled aggregate concrete［J］. Construction and Building Materials, 2018, 158: 228-235.

[3] TORRES A, BRANDT J, LEAR K, et al. A looming tragedy of the sand commons［J］. Science, 2017, 357(6355): 970-971.

[4] ZHU J, SHU X, TANG J H, et al. Effect of microfines from manufactured sand on yield stress of cement paste［J］. Construction and Building Materials, 2021, 267: 120987.

[5] SHEN W G, YANG Z G, CAO L H, et al. Characterization of manufactured sand: particle shape, surface texture and behavior in concrete［J］. Construction and Building Materials, 2016, 114: 595-601.

[7] ESTEPHANE P, GARBOCZI E J, BULLARD J W, et al. Three-dimensional shape characterization of fine sands and the influence of particle shape on the packing and workability of mortars［J］. Cement and Concrete Composites, 2019, 97: 125-142.

[8] UENO A, OGAWA Y. Influence of coarse aggregate shape on optimum fine to total aggregate ratio using a virtual voids-ratio diagram in concrete compaction［J］. Cement and Concrete Composites, 2020, 106: 103463.

[10] CEPURITIS R, JACOBSEN S, PEDERSEN B, et al. Crushed sand in concrete-effect of particle shape in different fractions and filler properties on rheology［J］. Cement and Concrete Composites, 2016, 71: 26-41.

[11] SHEN W G, LIU Y, WANG Z W, et al. Influence of manufactured sand’s characteristics on its concrete performance［J］. Construction and Building Materials, 2018, 172: 574-583.

[13] CUI P D, XIAO Y, YAN B X, et al. Morphological characteristics of aggregates and their influence on the performance of asphalt mixture［J］. Construction and Building Materials, 2018, 186: 303-312.

[15] WANG F, XIAO Y, CHEN Z W, et al. Morphological characteristics of mineral filler and their influence on active adhesion between aggregates and bitumen［J］. Construction and Building Materials, 2022, 323: 126520.

[16] BLOTT S, PYE K. Particle shape: a review and new methods of characterization and classification［J］. Sedimentology, 2008, 55(1): 31-63.