[1] Kakei A, Epaarachchi J, Mainul M, Leng J. Development of fracture and damage modeling concepts for composite materials. In: Epaarachchi J, Kahandawa G, eds. Structural Health Monitoring Technologies and Next-Generation Smart Composite Structures. 2016, Roca Raton: CRC Press, 339–364

[2] Kuhtz M, Hornig A, Gude M, J?ger H. A method to control delaminations in composites for adjusted energy dissipation characteristics. Materials & Design, 2017, 123: 103–111

[3] Olave M, Vara I, Usabiaga H, Aretxabaleta L, Lomov S V, Vandepitte D. Nesting effect on the mode II fracture toughness of woven laminates. Composites Part A, Applied Science and Manufacturing, 2015, 74: 174–181

[4] Shokrieh MM, Zeinedini A, Ghoreishi SM. On the mixed mode I/II delamination R-curve of E-glass/epoxy laminated composites. Composite Structures, 2017, 171: 19–31

[5] ShokriehMM, Heidari-Rarani M. Effect of stacking sequence on Rcurve behavior of glass/epoxy DCB laminates with 0°//0° crack interface. Materials Science and Engineering A, 2011, 529: 265–269

[6] Shokrieh MM, Heidari-Rarani M, Ayatollahi MR. Delamination Rcurve as a material property of unidirectional glass/epoxy composites. Materials & Design, 2012, 34: 211–218

[7] Ghasemnejad H, Hadavinia H, Aboutorabi A. Effect of delamination failure in crashworthiness analysis of hybrid composite box structures. Materials & Design, 2010, 31(3): 1105–1116

[8] Yasaee M, Bigg L, Mohamed G, Hallett S R. Influence of Z-pin embedded length on the interlaminar traction response of multidirectional composite laminates. Materials & Design, 2017, 115: 26–36

[9] Shaoquan W, Shangli D, Yu G, Yungang S. Thermal ageing effects on mechanical properties and barely visible impact damage behavior of a carbon fiber reinforced bismaleimide composite. Materials & Design, 2017, 115: 213–223

[10] Chang F K.Structural Health Monitoring. Lancaster: DESTechnol Publications, 2003

[11] Vieira A, de Oliveira R, Fraz?o O, Baptista J M, Marques A T. Effect of the recoating and the length on fiber Bragg grating sensors embedded in polymer composites. Materials & Design, 2009, 30(5): 1818–1821

[12] Kousiatza C, Karalekas D. In-situ monitoring of strain and temperature distributions during fused deposition modeling process. Materials & Design, 2016, 97: 400–406

[13] Kantaros A, Karalekas D. Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process. Materials & Design, 2013, 50: 44–50

[14] Kanerva M, Antunes P, Sarlin E, Orell O, Jokinen J, Wallin M, Brander T, Vuorinen J. Direct measurement of residual strains in CFRP-tungsten hybrids using embedded strain gauges. Materials & Design, 2017, 127(Supplement C): 352–363

[15] Yashiro S, Takeda N, Okabe T, Sekine H. A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors. Composites Science and Technology, 2005, 65(3–4): 659–667

[16] Sans D, Stutz S, Renart J, Mayugo J A, Botsis J. Crack tip identification with long FBG sensors in mixed-mode delamination. Composite Structures, 2012, 94(9): 2879–2887

[17] Okabe T, Yashiro S. Damage detection in holed composite laminates using an embedded FBG sensor. Composites Part A, Applied Science and Manufacturing, 2012, 43(3): 388–397

[18] Kahandawa G C, Epaarachchi J, Wang H, Canning J, Lau K T. Extraction and processing of real time strain of embedded FBG sensors using a fixed filter FBG circuit and an artificial neural network. Measurement, 2013, 46(10): 4045–4051

[19] Kahandawa G C, Epaarachchi J A, Wang H, Followell D, Birt P. Use of fixed wavelength fibre-Bragg grating (FBG) filters to capture time domain data from the distorted spectrum of an embedded FBG sensor to estimate strain with an artificial neural network. Sensors and Actuators A, Physical, 2013, 194: 1–7

[20] Takeda S, Okabe Y, Takeda N. Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors. Composites Part A, Applied Science and Manufacturing, 2002, 33(7): 971–980

[21] Takeda S, Minakuchi S, Okabe Y, Takeda N. Delamination monitoring of laminated composites subjected to low-velocity impact using small-diameter FBG sensors. Composites Part A, Applied Science and Manufacturing, 2005, 36(7): 903–908

[22] Kakei A A, Islam M,Leng J,EpaarachchiJ. Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials. Structural Health Monitoring, 2017, doi:10.1177/1475921717694812

[23] Ling H Y, Lau K, Cheng L, Su Z. Mode II fracture behaviour monitoring for composite laminates using embedded fibre Bragg grating sensors. Composite Structures, 2006, 76(1–2): 88–93

[24] Ling H Y, Lau K T, Su Z,Wong E T T. Monitoring mode II fracture behaviour of composite laminates using embedded fiber-optic sensors. Composites Part B, Engineering, 2007, 38(4): 488–497

[25] Stutz S, Cugnoni J, Botsis J. Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing and numerical analysis. Composites Science and Technology, 2011, 71(4): 443–449

[26] Kakei A, Epaarachchi J A, Islam M, Leng J, Rajic N. Detection and characterisation of delamination damage propagation in woven glass fibre reinforced polymer composite using thermoelastic response mapping. Composite Structures, 2016, 153: 442–450

[27] Chauffaille S, Jumel J, Shanahan M E R. Elasto-plastic analysis of the single cantilever beam adhesion test. Engineering Fracture Mechanics, 2011, 78(13): 2493–2504

[28] Sorensen L, Botsis J, Gmür T, Cugnoni J. Delamination detection and characterisation of bridging tractions using long FBG optical sensors. Composites Part A, Applied Science and Manufacturing, 2007, 38(10): 2087–2096

[29] Pereira G, McGugan M, Mikkelsen L P.FBG_SiMul V1.0: Fibre Bragg grating signal simulation tool for finite element method models. SoftwareX