[1] Zamkotsian F, Dohlen K, Lanzoni P, Mazzanti S P, Michel M L, Buat V, Burgarella D. Knife-edge test for characterization of subnanometer deformations in micro-optical surface. Proceedings of SPIE, Optical Manufacturing and Testing III, 1999, 3782: 328–336
[2] Hernández-Gómez G, Malacara-Hernández Z, Malacara-Hernández D. Hartmann tests to measure the spherical and cylindrical curvatures and the axis orientation of astigmatic lenses or optical surfaces. Applied Optics, 2014, 53(6): 1191–1199
[3] Dickson L D. Ronchi ruling method for measuring Gaussian beam diameter. Optical Engineering (Redondo Beach, Calif.), 1979, 18 (1): 180170
[4] Zhou P, Burge J H. Optimal design of computer-generated holograms to minimize sensitivity to fabrication errors. Optics Express, 2007, 15(23): 15410–15417
[5] Takasaki H. Moiré topography. Applied Optics, 1970, 9(6): 1467– 1472
[6] Chen S, Li S, Dai Y, Zheng Z. Testing of large optical surfaces with subaperture stitching. Applied Optics, 2007, 46(17): 3504–3509
[7] Kühn J, Colomb T, Montfort F, Charrière F, Emery Y, Cuche E, Marquet P, Depeursinge C. Real-time dual-wavelength digital holographic microscopy with a single hologram acquisition. Optics Express, 2007, 15(12): 7231–7242
[8] Barrientos B, Martínez-CelorioR A, López L M, Dirckx J J J, Cywiak M. Measurement of out-of-plane deformation by combination of speckle shearing interferometry. Optik (Stuttgart), 2004, 115 (6): 248–252
[9] Goodwin E P, Wyant J C. Field Guide to Interferometric Optical Testing. Bellingham, WA: SPIE Press, 2006
[10] Breidenthal R S. Measurement of large optical surfaces for fabrication using a non-optical technique. Proceedings of SPIE, Large Optics II, 1992, 1618: 97–103
[11] Comley P, Morantz P, Shore P, Tonnellier X. Grinding metre scale mirror segments for the E-ELT ground based telescope. CIRP Annals-Manufacturing Technology, 2011, 60(1): 379–382
[12] Gray C, Baker I, Davies G. Fast manufacturing of E-ELT mirror segments using CNC polishing. Proceedings of SPIE, Optical Manufacturing and Testing X, 2013, 8838: 88380K
[13] Su P, Oh C J, Parks R E, Burge J H. Swing arm optical CMM for aspherics. Proceedings of SPIE, Optical Manufacturing and Testing VIII, 2009, 7426: 74260J
[14] Su P, Wang Y H, Oh C J, Parks R E, Burge J H. Swing arm optical CMM: self-calibration with dual probe shear test. Proceedings of SPIE, Optical Manufacturing and Testing IX, 2011, 8126: 81260W
[15] Jing H, King C, Walker D. Simulation and validation of a prototype swing arm profilometer for measuring extremely large telescope mirror-segments. Optics Express, 2010, 18(3): 2036–2048
[16] Jing H, King C,Walker D. Measurement of influence function using swing arm profilometer and laser tracker. Optics Express, 2010, 18 Fig. 13 Hyperboloidal mirror measurement. (a) Raw data after removing tilt error; (b) measuring result obtained by PMI700; (c) measuring result obtained by sub-aperture stitching; (d) direct subtraction of measurement results of PMI700 and sub-aperture stitching interferometer Xu YE et al. Error elimination for three-dimensional profile measurement system 411 (5): 5271–5281
[17] Chen F J, Yin S H, Huang H, Ohmori H,Wang Y, Fan Y F, Zhu Y J. Profile error compensation in ultra-precision grinding of aspheric sur faces with on-machine measurement. International Journal of Machine Tools & Manufacture, 2010, 50(5): 480–486
