Effect Analysis of Embedded Fiber Transmission Performance by Lamination Process

Yu-lai SHE; De-jian ZHOU; Xiao-yong CHEN; Xu YANG; Shan TU; Hua-jun LAI

doi:10.3788/gzxb20204903.0306001

Journals >Acta Photonica Sinica >Volume 49 >Issue 3 >Page 0306001 > Article

Acta Photonica Sinica
Vol. 49, Issue 3, 0306001 (2020)

Effect Analysis of Embedded Fiber Transmission Performance by Lamination Process

Yu-lai SHE¹, De-jian ZHOU¹, Xiao-yong CHEN¹, Xu YANG², Shan TU³, and Hua-jun LAI⁴

Author Affiliations

¹School of Mechanical and Electrical Engineering, Guilin University of Electronic Technology, Guilin, Guangxi 541004, China

²School of Mechano-Electronic Engineering, Xidian University, Xi'an 710071, China

³Institute of Physical Science and Technology, Guangxi Normal University, Guilin, Guangxi 541004, China

⁴Guangxi Key Laboratory of Information Material, Guilin, Guangxi 541004, China

show less

DOI: 10.3788/gzxb20204903.0306001 Cite this Article

Yu-lai SHE, De-jian ZHOU, Xiao-yong CHEN, Xu YANG, Shan TU, Hua-jun LAI. Effect Analysis of Embedded Fiber Transmission Performance by Lamination Process[J]. Acta Photonica Sinica, 2020, 49(3): 0306001 Copy Citation Text

show less

Fig. 1. Schematic offiber embedded in the rectangular groove flexible optoelectronic substrate

Download full size | View in the Article

Fig. 2. Curves of lamination process

Download full size | View in the Article

Fig. 3. The stress distribution of fiber embedded in three kinds of groove structures

Download full size | View in the Article

Fig. 4. The effect of groove structure on fiber stress

Download full size | View in the Article

$Influence of temperature on refractive index and the difference of refractive index$

Fig. 5. Influence of temperature on refractive index and the difference of refractive index

Download full size | View in the Article

$Influence of pressure on refractive index and the difference of refractive index$

Fig. 6. Influence of pressure on refractive index and the difference of refractive index

Download full size | View in the Article

Material	Material properties
Material	Elasticity modulus /Gpa	Poisson′s ratio	Coefficient of thermal expansion/(×10^-6·℃^－1)	Density/(kg·m^-3)	Specific heat capacity/(J·kg^-1·℃^-1)	Thermal conductivity/(W·m^-1·℃^-1)
Electrical layer	110	0.33	18	894 0	384	398
Polyimide	3.2	0.335	22	142 0	109 0	0.12
Adhesive layer	0.586(≤48 ℃)0.003(> 48 ℃)	0.45	42.40(≤48 ℃)388.00(> 48 ℃)	110 0	192 5	0.23
Fiber	71.9	0.16	0.55	222 0	745	1.5
Filled-rubber	1.84	0.3	27	970	160 0	0.21

Table 1. Material properties

Download Citation

Save the article for my favorites

Paper Information