[1] Hu Zhuangqi, Wang Huaming, Zhang Jinghua et al.. Nonequilibrium solidification of single crystal nickel-base superalloy［J］. Corrosion Science and Protection Technology, 1993, (1): 15～22

[2] Yu Jingjiang, Sun Xiaofeng, Guan Hengrong et al.. Influence of heat treatment on the microstructure and mechanical properties of DZ951 alloy［J］. Rare Metals, 2008, 27(2): 216～222

[3] Chen Jinsong. Experimental research on formation of laser sintering WC particles reinforced Ni-base alloy bulk［J］. Chinese J. Lasers, 2010, 37(3): 868～872

[4] Wang Huaming, Zhang Lingyun, Li An et al.. Progress on laser melting deposition processing and manufacturing of advanced aeronautical metallic structural materials and coatings［J］. Heat Treatment of Metals, 2008, 33(1): 82～85

[5] Feng Liping, Huang Weidong, Lin Xin et al.. FGH95 superalloy laser metal forming directional solidification［J］. The Chinese Journal of Nonferrous Metals, 2003, 13(1): 181～187

[6] Liu Dong, Zhang Shuquan, Li An et al.. Microstructure and tensile properties of laser melting deposited TiC/TA15 titanium matrix composites［J］. J. Alloys & Compounds, 2009, 485(1-2): 156～162

[7] Chen Jianyin, Xue Lijue. Process-induced microstructural characteristics of laser consolidated IN-738 superalloy［J］. Mater. Sci. Engng. A, 2010, 527(27-28): 7318～7328

[8] Zhang Yongzhong, Huang Can, Wu Fuyao et al.. Microstructure and mechanical properties of laser direct deposited γ-TiAl alloy［J］. Chinese J. Lasers, 2010, 37(10): 2684～2688

[9] Chen Jing, Zhang Fengying, Tan Hua et al.. Alloying mechanics in moving melt pool during laser solid forming from blended elemental powders［J］. Chinese J. Lasers, 2010, 37(8): 2154～2159

[10] Tan Yongning, Huang Zhaohui, Jia Xinyun et al.. Study on a directionally solidified superalloy DZ408 (DZ8)［C］. Beijing: Eleventh Annual Meeting of Chinese High-Temperature Alloys Proceedings, 2007. 389～391

[11] Huang Weidong, Lin Xin, Chen Jing et al.. Laser Solid Forming［M］. Xi′an: Northwestern Polytechnical University Press, 2007. 117～134

[12] Hu Hanqi. Fundamental of Metallic Solidification(2nd Edition)［M］. Beijing: China Machine Press, 2000. 241

[13] He Jinjiang, Zhong Minlin, Liu Wenjin et al.. Observation and analysis on behaviors of powder stream concentration and molten pool in laser deposition process in controlled environment chamber［J］. Chinese J. Lasers, 2006, 33(2): 284～288

[14] Yang Haiou, Lin Xin, Chen Jing et al.. Functionally gradient materials prepared with laser rapid forming［J］. Chinese J. Laser, 2005, 32(4): 567～570

[15] N. Wang, S. Mokadem, M. Rappaza et al.. Solidification cracking of superalloy single-and bi-crystals［J］. Acta Materialia, 2004, 52(11): 3173～3182

[16] Yu Yongning. The Principle of the Metallorgy［M］. Beijing: Metallurgical Industry Press, 2000. 268

[17] M. Gumann, C. Bezenon, P. Canalis et al.. Single-crystal laser deposition of superalloys: processing-microstructure maps［J］. Acta Materialia, 2001, 49(6): 1051～1062

[18] Li Jia, Wang Huaming. Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene 41 by laser melting deposition manufacturing［J］. Mater. Sci. Engng., 2010, 527(18-19): 4823～4829