• Journal of Applied Optics
  • Vol. 42, Issue 5, 767 (2021)
Yan ZHOU1,2, Shibin WU1,*, Lihua WANG1, Jie LI1..., Junfeng DU1 and Jiang BIAN1|Show fewer author(s)
Author Affiliations
  • 1Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China
  • 2University of Chinese Academy of Sciences, Beijing 100049, China
  • show less
    DOI: 10.5768/JAO202142.0501002 Cite this Article
    Yan ZHOU, Shibin WU, Lihua WANG, Jie LI, Junfeng DU, Jiang BIAN. Design of catadioptric middle infrared diffractive telescope system with large aperture[J]. Journal of Applied Optics, 2021, 42(5): 767 Copy Citation Text show less
    Structure of diffractive telescope system
    Fig. 1. Structure of diffractive telescope system
    Initiating structure of catadioptric mid-wave infrared diffractive telescope system
    Fig. 2. Initiating structure of catadioptric mid-wave infrared diffractive telescope system
    Structure of catadioptric mid-wave infrared diffractive telescope system
    Fig. 3. Structure of catadioptric mid-wave infrared diffractive telescope system
    MTF curves of system at three temperatures
    Fig. 4. MTF curves of system at three temperatures
    Spot diagram of system at three temperatures
    Fig. 5. Spot diagram of system at three temperatures
    Phase and line frequency radial distribution curves of diffractive lens and diffractive correction lens
    Fig. 6. Phase and line frequency radial distribution curves of diffractive lens and diffractive correction lens
    Stray light analysis model
    Fig. 7. Stray light analysis model
    Ghost image illumination distribution of system
    Fig. 8. Ghost image illumination distribution of system
    NITD curves of system
    Fig. 9. NITD curves of system
    参数指标
    口径/mm1 000
    波段 /μm3.8~4.2
    焦距/mm2 000
    F数 2
    全视场/(°)0.12
    MTF(@16.7 lp/mm)$ >0.6 $
    工作温度/℃−20~60
    Table 1. Parameters of optical system
    项目衍射元件其他元件
    厚度和空气间隔/mm±0.025±0.015
    半径/mm±0.015
    表面和元件偏心/mm±0.015±0.015
    表面和元件倾斜/(″)2010
    面型误差/局部光圈1/30λ0.2
    Table 2. Tolerance allocation of system elements
    项目MTF下降量
    TETX(Y)-中继反射镜1/(″)10″0.050 2
    TEDY-三次成像镜1/mm±0.010.023 8
    TEDX-三次成像镜1/mm±0.010.023 8
    TSDY-三次成像镜1前表面/mm±0.010.020 0
    TSDX-三次成像镜1前表面/mm±0.010.020 0
    Table 3. Sensitive tolerance terms
    具体路径光线 数量 光通量 占比/%
    成像光线22 54999.90
    三次成像镜3后表面与三次成像镜2前表面反射5 4600.01
    再聚焦镜2后表面与校正镜前表面反射14 4680.01
    再聚焦镜1前表面与校正镜前表面反射14 4680.01
    三次成像镜3后表面与三次成像镜1后表面反射6 4600.01
    中继透镜2前表面与中继透镜1后表面反射5 3440.01
    再聚焦镜3后表面与再聚焦镜2前表面反射3 8710.01
    主镜−3级与校正镜-3级衍射2370.01
    主镜+5级与校正镜+5级衍射2590.01
    Table 4. Ghost image path information
    Yan ZHOU, Shibin WU, Lihua WANG, Jie LI, Junfeng DU, Jiang BIAN. Design of catadioptric middle infrared diffractive telescope system with large aperture[J]. Journal of Applied Optics, 2021, 42(5): 767
    Download Citation