[1] BAANT Z P, YU Q, LI G H. Excessive long-time deflections of prestressed box girders. I: record-span bridge in Palau and other paradigms［J］. Journal of Structural Engineering, 2012, 138(6): 676-686.

[2] BAANT Z P, YU Q, LI G H. Excessive long-time deflections of prestressed box girders. II: numerical analysis and lessons learned[J]. Journal of Structural Engineering, 2012, 138(6): 687-696.

[3] GUO Q, SUN Y B, MI T. Assessment on long-term deflection of concrete beam bridges based on uncertainty quantification method［J］. Structures, 2021, 34: 3013-3027.

[4] NEHDI M L. Only tall things cast shadows: opportunities, challenges and research needs of self-consolidating concrete in super-tall buildings［J］. Construction and Building Materials, 2013, 48: 80-90.

[5] JIN Q X, LI V C. Development of lightweight engineered cementitious composite for durability enhancement of tall concrete wind towers［J］. Cement and Concrete Composites, 2019, 96: 87-94.

[6] OUYANG X, SHI C J, WU Z M, et al. Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition［J］. Cement and Concrete Research, 2020, 138: 106241.

[8] BAZANT Z P, HUBLER M H. Theory of cyclic creep of concrete based on Paris law for fatigue growth of subcritical microcracks［J］. Journal of the Mechanics and Physics of Solids, 2014, 63: 187-200.

[9] KONSTA-GDOUTOS M S, DANOGLIDIS P A, SHAH S P. High modulus concrete: effects of low carbon nanotube and nanofiber additions［J］. Theoretical and Applied Fracture Mechanics, 2019, 103: 102295.

[12] WANG Q H, LI Z, ZHANG Y Z, et al. Influence of coarse coal gangue aggregates on elastic modulus and drying shrinkage behaviour of concrete［J］. Journal of Building Engineering, 2020, 32: 101748.

[13] BEUSHAUSEN H, DITTMER T. The influence of aggregate type on the strength and elastic modulus of high strength concrete［J］. Construction and Building Materials, 2015, 74: 132-139.

[14] WANG X H, WANG K J, TAYLOR P, et al. Assessing particle packing based self-consolidating concrete mix design method［J］. Construction and Building Materials, 2014, 70: 439-452.

[15] CHENG Y H, ZHU B L, YANG S H, et al. Design of concrete mix proportion based on particle packing voidage and test research on compressive strength and elastic modulus of concrete［J］. Materials (Basel, Switzerland), 2021, 14(3): 623.

[16] SUN R W, FANOURAKIS G C. An assessment of factors affecting the elastic modulus of concrete［J］. Structural Concrete, 2022(23): 593-603.

[17] NG P L, KWAN A K H, LI L G. Packing and film thickness theories for the mix design of high-performance concrete［J］. Journal of Zhejiang University-Science A (Applied Physics ＆ Engineering), 2016, 17(10): 759-781.

[18] ZHU W, CHEN Y, LI F X, et al. Design and preparation of high elastic modulus self-compacting concrete for pre-stressed mass concrete structures［J］. Journal of Wuhan University of Technology-Mater Sci Ed, 2016, 31(3): 563-573.

[19] YOUSUF S, SANCHEZ L F M, SHAMMEH S A. The use of particle packing models (PPMs) to design structural low cement concrete as an alternative for construction industry［J］. Journal of Building Engineering, 2019, 25: 100815.

[20] KLEIN N S, LENZ L A, MAZER W. Influence of the granular skeleton packing density on the static elastic modulus of conventional concretes［J］. Construction and Building Materials, 2020, 242: 118086.

[21] LI V C, MAALEJ M. Toughening in cement based composites. Part I: Cement, mortar, and concrete［J］. Cement and Concrete Composites, 1996, 18(4): 223-237.

[23] SHAH A A, RIBAKOV Y. Recent trends in steel fibered high-strength concrete［J］. Materials & Design, 2011, 32(8/9): 4122-4151.

[28] FURNAS C C. Grading aggregates-I.-mathematical relations for beds of broken solids of maximum density［J］. Industrial & Engineering Chemistry, 1931, 23(9): 1052-1058.

[29] ZHENG J M, CARLSON W B, REED J S. The packing density of binary powder mixtures［J］. Journal of the European Ceramic Society, 1995, 15(5): 479-483.

[32] LIU J Z, HAN F Y, CUI G, et al. Combined effect of coarse aggregate and fiber on tensile behavior of ultra-high performance concrete［J］. Construction and Building Materials, 2016, 121: 310-318.

[33] GULER S, KER B, AKBULUT Z F. Workability, strength and toughness properties of different types of fiber-reinforced wet-mix shotcrete［J］. Structures, 2021, 31: 781-791.

[34] HAN J H, ZHAO M M, CHEN J Y, et al. Effects of steel fiber length and coarse aggregate maximum size on mechanical properties of steel fiber reinforced concrete［J］. Construction and Building Materials, 2019, 209: 577-591.

[36] RILEM D R. Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams［J］.Materials and Structures, 1985, 18(4): 287-290.