[2] RIXOM M R, MAILVAGANAM N P. Chemical Admixture for Concrete[M]. 2nd ed., Spon Ltd, New York, 1986.
[3] KORHONEN C, CORTEZ E, CHAREST B. Strength development of concrete cured at low temperature[J]. Concr Int, 1992, 14: 34–39.
[5] HE R, LU N L. Air void system and freezing-thawing resistance of concrete composite with the incorporation of thermo-expansive polymeric microspheres[J]. Constr Build Mater, 2024, 419: 135535.
[6] RONG X L, ZHANG Y X, ZHENG S S, et al. Seismic performance of reinforced concrete beams under freeze-thaw cycles[J]. J Build Eng, 2022, 60: 103979.
[7] COUSSY O, MONTEIRO P J M. Poroelastic model for concrete exposed to freezing temperatures[J]. Cem Concr Res, 2008, 38(1): 40–48.
[8] WU Z M, LIBRE N A, KHAYAT K H. Factors affecting air-entrainment and performance of roller compacted concrete[J]. Constr Build Mater, 2020, 259: 120413.
[9] WANG Y G, XIE M, ZHANG J. Mechanical properties and damage model of modified recycled concrete under freeze-thaw cycles[J]. J Build Eng, 2023, 78: 107680.
[10] ORTIZ J, AGUADO A, AGULL L, et al. Influence of environmental temperatures on the concrete compressive strength: Simulation of hot and cold weather conditions[J]. Cem Concr Res, 2005, 35(10): 1970–1979.
[11] QIN X C, MENG S P, CAO D F, et al. Evaluation of freeze-thaw damage on concrete material and prestressed concrete specimens[J]. Constr Build Mater, 2016, 125: 892–904.
[12] CAI H, LIU X. Freeze-thaw durability of concrete: Ice formation process in pores[J]. Cem Concr Res, 1998, 28(9): 1281–1287.
[13] ZHANG G, YU H Y, LI H M, et al. Experimental study of deformation of early age concrete suffering from frost damage[J]. Constr Build Mater, 2019, 215: 410–421.
[16] Practical Guideline for Investigation. Recommendation for practice of cold weather concreting[S]. Architectural Institute of Japan, 2010, Tokyo, Japan
[17] Fib Model Code 2010. Model code for concrete structures 2010[S]. International Federation for Structural Concrete (fib), 2013, Lausanne, Switzerland.
[18] ACI 306R-10. Guide to cold weather concreting, American Concrete Institute[S]. Farmington Hills, Michigan, USA, 2010, 2–22.
[19] LIU Y S, SUN F Z, YU K Y, et al. Experimental and numerical research on development of synthetic heat storage form incorporating phase change materials to protect concrete in cold weather[J]. Renew Energy, 2020, 149: 1424–1433.
[20] LI H B, JIANG S H, CHEN X, et al. Hydration investigation of negative temperature concrete at early age based on low-field nuclear magnetic resonance[J]. Cold Reg Sci Technol, 2022, 194: 103449.
[21] XIA W, CUI S A, ZHU L X, et al. Effects of nano-silica modification on early age hydration process in winter construction of tunnel engineering[J]. Constr Build Mater, 2023, 408: 133804.
[22] TELESCA A, MARROCCOLI M, PACE M L, et al. A hydration study of various calcium sulfoaluminate cements[J]. Cem Concr Compos, 2014, 53: 224–232.
[23] HUANG G P, PUDASAINEE D, GUPTA R, et al. The performance of calcium sulfoaluminate cement for preventing early-age frost damage[J]. Constr Build Mater, 2020, 254: 119322.
[24] POWERS T C, WILLIS T F. The air requirement of frost resistant concrete[C]. Proceedings of the twenty-ninth annual meeting of the highway research board, Washington D C, 1950: 184–211
[25] POWERS T C, HELMUTH R A. Theory of volume changes in hardened portland-cement paste during freezing[J]. Highway Research Board Proceedings, 1953, 32: 285–297.
[26] LITVAN G G. Phase transitions of adsorbates: IV, mechanism of frost action in hardened cement paste[J]. J Am Ceram Soc, 1972, 55(1): 38–42.
[27] KANG Y. Surface scaling mechanism and prediction for concrete[D]. University of Michigan, 2010.
[29] VALENZA J J II, SCHERER G W. A review of salt scaling: I. Phenomenology[J]. Cem Concr Res, 2007, 37(7): 1007–1021.
[30] VALENZA J J II, SCHERER G W. A review of salt scaling: II. Mechanisms[J]. Cem Concr Res, 2007, 37(7): 1022–1034.
[31] Raoult F M. General law of the vapor pressure of solvents[J]. ComptesRendus, 1887, 104: 1430-1433.
[36] SANG Y, YANG Y Z, ZHAO Q. Electrical resistivity of plain cement-based materials based on ionic conductivity: A review of applications and conductive models[J]. J Build Eng, 2022, 46: 103642.
[39] LI P R, GAO X J, WANG K J, et al. Hydration mechanism and early frost resistance of calcium sulfoaluminate cement concrete[J]. Constr Build Mater, 2020, 239: 117862.
[40] SANG Y, YANG Y Z. Assessing the freezing process of early age concrete by resistivity method[J]. Constr Build Mater, 2020, 238: 117689.
[41] WEI Y, WU Z H, YAO X F, et al. Quantifying effect of later curing on pores of paste subject to early-age freeze-thaw cycles by different techniques[J]. J Mater Civ Eng, 2019, 31(8): 04019153.
[42] ZHANG G, YANG Y Z, YANG H L, et al. Calcium sulphoaluminate cement used as mineral accelerator to improve the property of Portland cement at sub-zero temperature[J]. Cem Concr Compos, 2020, 106: 103452.
[43] ZHANG G, YANG H L, JU C, et al. Novel selection of environment-friendly cementitious materials for winter construction: Alkali-activated slag/Portland cement[J]. J Clean Prod, 2020, 258: 120592.
[44] BAI S, GUAN X C, LI G Y. Effect of the early-age frost damage and nano-SiO2 modification on the properties of Portland cement paste[J]. Constr Build Mater, 2020, 262: 120098.
[45] HU X, PENG G, NIU D, et al. Damage study on service performance of early-age frozen concrete[J]. Constr Build Mater, 2019, 210: 22–31.
[46] KOH K T, PARK C J, RYU G S, et al. An experimental investigation on minimum compressive strength of early age concrete to prevent frost damage for nuclear power plant structures in cold climates[J]. Nucl Eng Technol, 2013, 45(3): 393–400.
[47] HU X P, PENG G, NIU D T, et al. Bond characteristics of deformed steel bar in early-age frozen concrete during service period[J]. Eng Struct, 2019, 197: 109438.
[48] CHOI H, ZHANG W Y, HAMA Y. Method for determining early-age frost damage of concrete by using air-permeability index and influence of early-age frost damage on concrete durability[J]. Constr Build Mater, 2017, 153: 630–639.
[49] NASSIF A Y, PETROU M F. Influence of cold weather during casting and curing on the stiffness and strength of concrete[J]. Constr Build Mater, 2013, 44: 161–167.
[50] YI S T, PAE S W, KIM J K. Minimum curing time prediction of early-age concrete to prevent frost damage[J]. Constr Build Mater, 2011, 25(3): 1439–1449.
[51] KOGBARA R B, IYENGAR S R, GRASLEY Z C, et al. A review of concrete properties at cryogenic temperatures: Towards direct LNG containment[J]. Constr Build Mater, 2013, 47: 760–770.
[52] BERNHARDT C J. Damage due to freezing of fresh concrete[J]. ACI J Proc, 1956, 52(1): 573–580.
[53] CORR D J, MONTEIRO P J M, BASTACKY J.. Microscopic characterization of ice morphology in entrained air voids[J]. ACI Mater J, 2002, 99(2): 190–195.
[54] BRODNAN M, BAHLEDA F, KOTES P. Analysis of mechanical properties of concrete of frozen and unfrozen specimens[J]. Procedia Eng, 2014, 91: 435–440.
[56] LIU D Y, TU Y M, SHI P, et al. Mechanical and durability properties of concrete subjected to early-age freeze–thaw cycles[J]. Mater Struct, 2021, 54(6): 211.
[57] WU Q Y, MA Q Y, ZHANG J S. Mechanical properties and damage constitutive model of concrete under low-temperature action[J]. Constr Build Mater, 2022, 348: 128668.
[58] KOTWA A. Influence of sub-zero temperature and initial set time on the properties of hardened concrete[J]. Struct Environ, 2011, 3(2): 11–17.
[60] GAO F D. Correlation study on the chloride ion permeability resistance and mechanical properties of the early frost concrete[J]. Constr Technol, 2017, 46 (12): 27–32.
[61] YUAN J, CAI X P, XIA G H, GE Y, ZHANG B S. Mechanical properties of fiber concrete at low temperature[J]. Ind. Constr. 2016, 46: 674–677.
[62] LI Y, CHAI J Q, WANG R J, et al. Experimental evaluation of the frost resistance durability of RCC layer subjected to early-age freezing[J]. J Build Eng, 2023, 76: 107153.
[64] NI XG. Effects of early frozen damage on the performance of concrete[J]. China Civ Eng J, 1959, 6(1): 50–62.
[65] REN H T, LIU L X, WANG J. Effect of early-age frozen damage on bond behavior of steel and concrete[J]. J Build Mater, 2010, 13(6): 796–801
[66] HUANG D G, FENG Y, XIA Q, et al. Research on mechanical properties and durability of early frozen concrete: A review[J]. Constr Build Mater, 2024, 425: 135988.
[68] ASTM C1202, Electrical indication of concrete’s ability to resist chloride ionpenetration[S]. Annual Book of American Society for Testing Materials Standards, vol. C04.02, 2000.
[70] DONG S H, FENG D C, JIANG S H, et al. Effect of freezing temperature on the microstructure of negative temperature concrete[J]. Adv Mater Res, 2013, 663: 343–348.
[72] TU Y M, LIU D Y, WANG T F, et al. Evaluation on later-age performance of concrete subjected to early-age freeze–thaw damage[J]. Constr Build Mater, 2021, 270: 121491.
[73] LI Y, ZHOU Y, WANG R J, et al. Experimental investigation on the properties of the interface between RCC layers subjected to early-age frost damage[J]. Cem Concr Compos, 2022, 134: 104745.
[74] WON J Y, LEE S H, PARK T W, et al. Basic applicability of an insulated Gang form for concrete building construction in cold weather[J]. Constr Build Mater, 2016, 125: 458–464.
[75] CHOI S H, LEE H S, CHOI H K, et al. Experimental research on development of heated form incorporating exothermic reaction powder to protect concrete in cold weather[J]. Constr Build Mater, 2017, 135: 30–36.
[76] GUO J B, LIU L, WANG Q. Application self-regulating heating cable curing of concrete in winter[J]. Appl Mech Mater, 2014, 638–640: 1531–1535.
[77] LEE G C, HAN M C, BAEK D H, et al. Effect of heat curing methods on the temperature history and strength development of slab concrete for nuclear power plant structures in cold climates[J]. Nucl Eng Technol, 2012, 44(5): 523–534.
[78] LIU Y S, WANG M Z, WANG W. Ohmic heating curing of electrically conductive carbon nanofiber/cement-based composites to avoid frost damage under severely low temperature[J]. Compos Part A Appl Sci Manuf, 2018, 115: 236–246.
[79] YU K Y, JIA M J, YANG Y Z, et al. A clean strategy of concrete curing in cold climate: Solar thermal energy storage based on phase change material[J]. Appl Energy, 2023, 331: 120375.
[80] Rixom M, Mailvaganam N. Chemical Admixtures for Concrete[M]. London: 1999.
[81] JI T. Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2[J]. Cem Concr Res, 2005, 35(10): 1943–1947.
[82] WU Z M, SHI C J, KHAYAT K H, et al. Effects of different nanomaterials on hardening and performance of ultra-high strength concrete (UHSC)[J]. Cem Concr Compos, 2016, 70: 24–34.
[83] WU Z M, KHAYAT K H, SHI C J. Effect of nano-SiO2 particles and curing time on development of fiber-matrix bond properties and microstructure of ultra-high strength concrete[J]. Cem Concr Res, 2017, 95: 247–256.
[84] SAID A M, ZEIDAN M S, BASSUONI M T, et al. Properties of concrete incorporating nano-silica[J]. Constr Build Mater, 2012, 36: 838–844.
[85] JO B W, KIM C H, TAE G H, et al. Characteristics of cement mortar with nano-SiO2 particles[J]. Constr Build Mater, 2007, 21(6): 1351–1355.
[86] ZHANG G, YANG Y Z, LI H M. Calcium-silicate-hydrate seeds as an accelerator for saving energy in cold weather concreting[J]. Constr Build Mater, 2020, 264: 120191.
[87] WU Z M, KHAYAT K H. Design, mechanism, and performance of cement-based materials with zero-dimensional nanomaterials[M]//Nanotechnology for Civil Infrastructure. Amsterdam: Elsevier, 2023: 69–92.
[88] ALZAZA A, OHENOJA K, LANGS I, et al. Low-temperature (–10 ℃) curing of Portland cement paste–Synergetic effects of chloride-free antifreeze admixture, C-S-H seeds, and room-temperature pre-curing[J]. Cem Concr Compos, 2022, 125: 104319.
[89] LAND G, STEPHAN D. Controlling cement hydration with nanoparticles[J]. Cem Concr Compos, 2015, 57: 64–67.
[90] GUAN X C, BAI S, LI H, et al. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cementitious composites under the early-age freezing conditions[J]. Constr Build Mater, 2020, 233: 117317.
[91] GARCA-MAT M, DE LA TORRE A G, LEN-REINA L, et al. Effect of calcium sulfate source on the hydration of calcium sulfoaluminate eco-cement[J]. Cem Concr Compos, 2015, 55: 53–61.
[92] JANOTKA I, KRAJI L, RAY A, et al. The hydration phase and pore structure formation in the blends of sulfoaluminate-belite cement with Portland cement[J]. Cem Concr Res, 2003, 33(4): 489–497.
[93] LE SAOT G, LOTHENBACH B, HORI A, et al. Hydration of Portland cement with additions of calcium sulfoaluminates[J]. Cem Concr Res, 2013, 43: 81–94.
[94] HUANG G P, PUDASAINEE D, GUPTA R, et al. Hydration reaction and strength development of calcium sulfoaluminate cement-based mortar cured at cold temperatures[J]. Constr Build Mater, 2019, 224: 493–503.
[95] QIN L, GAO X J, ZHANG A L. Potential application of Portland cement-calcium sulfoaluminate cement blends to avoid early age frost damage[J]. Constr Build Mater, 2018, 190: 363–372.
[96] PALOMO A, MALTSEVA O, GARCIA-LODEIRO I, et al. Cimenturihibridealcaline. Partea a II-a: Factorul clincher*/hybrid alkaline cements. Part II: The clinker factor[J]. Revista Romana de Materiale, 2013, 43(1): 74.
[97] MALVIYA M, GOLIYA H S. Durability of fly ash based geopolymer concrete using alkaline solutions (NaOH and Na2SiO3)[J]. Int J Emerg Tren Eng Dev 2014, 4: 18-33.
[98] CYR M, POUHET R. The frost resistance of alkali-activated cement-based binders[M]//Handbook of Alkali-Activated Cements, Mortars and Concretes. Amsterdam: Elsevier, 2015: 293–318.
[99] ALZAZA A, OHENOJA K, ILLIKAINEN M. One-part alkali-activated blast furnace slag for sustainable construction at subzero temperatures[J]. Constr Build Mater, 2021, 276: 122026.
[100] ALZAZA A, OHENOJA K, ILLIKAINEN M. Enhancing the mechanical and durability properties of subzero-cured one-part alkali-activated blast furnace slag mortar by using submicron metallurgical residue as an additive[J]. Cem Concr Compos, 2021, 122: 104128.
[101] ZHANG H E, AI J H, REN Q, et al. Understanding the strength evolution of alkali-activated slag pastes cured at subzero temperature[J]. Cem Concr Compos, 2023, 138: 104993.
[102] MEHTA P K, MONTEIRO P J M. Concrete: microstructure, properties, and materials[M]. 3rd ed. New York: McGraw-Hill, 2006
[103] NMAI C K. Cold weather concreting admixtures[J]. Cem Concr Compos, 1998, 20(2/3): 121–128.
[104] WANG Q Z, QI J L, WANG S H, et al. Effect of freeze-thaw on freezing point of a saline loess[J]. Cold Reg Sci Technol, 2020, 170: 102922.
[105] LIU X M, ZHANG M H, CHIA K S, et al. Mechanical properties of ultra-lightweight cement composite at low temperatures of 0 to –60 ℃[J]. Cem Concr Compos, 2016, 73: 289–298.
[106] SKAPSKI A, BILLUPS R, ROONEY A. Capillary cone method for determination of surface tension of solids[J]. J Chem Phys, 1957, 26(5): 1350–1351.
[107] HELMUTH R A. Capillary size restrictions on ice formation in hardened Portland cement pastes[J]. 4th Int Congr Chem Cem Vol 2, 1960: 855–869.
[108] LIU Y P, YANG S, LI J H, et al. Effect of w/c ratio and antifreeze admixture on the frost damage of sulfoaluminate cement concrete at –20 ℃[J]. Constr Build Mater, 2022, 347: 128457.
[109] ULLU M, ARSLAN M. The effects of antifreeze use on physical and mechanical properties of concrete produced in cold weather[J]. Compos Part B Eng, 2013, 50: 202–209.
[110] ROSENQVIST M, FRIDH K, HASSANZADEH M. Macroscopic ice lens growth in hardened concrete[J]. Cem Concr Res, 2016, 88: 114–125.
[111] YASIEN A M, BASSUONI M T. Nano-modified concrete at sub-zero temperatures: Experimental and statistical modelling[J]. Mag Concr Res, 2022, 74(1): 2–21.
[112] POURSAEE A, LAURENT A, HANSSON CM. Corrosion of steel bars in OPC mortar exposed to NaCl, MgCl2 and CaCl2: Macro-and micro-cell corrosion perspective[J]. Cem Concr Res, 2010, 40(3): 426-30.
[113] KARAGL F, DEMIRBOA R, KAYGUSUZ M A, et al. The influence of calcium nitrate as antifreeze admixture on the compressive strength of concrete exposed to low temperatures[J]. Cold Reg Sci Technol, 2013, 89: 30–35.
[114] LAND G, STEPHAN D. The influence of nano-silica on the hydration of ordinary Portland cement[J]. J Mater Sci, 2012, 47(2):1011–1017.
[116] DEMIRBOA R, KARAGL F, POLAT R, et al. The effects of urea on strength Gaining of fresh concrete under the cold weather conditions[J]. Constr Build Mater, 2014, 64: 114–120.
[117] KARAGOL F, DEMIRBOGA R, KHUSHEFATI W H. Behavior of fresh and hardened concretes with antifreeze admixtures in deep-freeze low temperatures and exterior winter conditions[J]. Constr Build Mater, 2015, 76: 388–395.
[118] KHAN J, SANTHA KUMAR G. Influence of binary antifreeze admixtures on strength performance of concrete under cold weather conditions[J]. J Build Eng, 2021, 34: 102055.
[119] PETERSEN T, VALDENAIRE P L, PELLENQ R, et al. A reaction model for cement solidification: Evolving the C-S-H packing density at the micrometer-scale[J]. J Mech Phys Solids, 2018, 118: 58–73.