• High Power Laser and Particle Beams
  • Vol. 36, Issue 5, 055002 (2024)
Xinjun Zhang, Weixi Luo, Yixiang Hu, Jiahui Yin, and Wenyuan Zhou
Author Affiliations
  • State Key Laboratory of Intense Pulsed Radiation Simulation and Effect, Northwest Institute of Nuclear Technology, Xi’an 710024, China
  • show less
    DOI: 10.11884/HPLPB202436.230341 Cite this Article
    Xinjun Zhang, Weixi Luo, Yixiang Hu, Jiahui Yin, Wenyuan Zhou. A design of B-dot calibration simulator for azimuthal transmission line[J]. High Power Laser and Particle Beams, 2024, 36(5): 055002 Copy Citation Text show less
    References

    [1] Smith I D. Induction voltage adders and the induction accelerator family[J]. Physical Review Special Topics—Accelerators and Beams, 7, 064801(2004).

    [2] Cong Peitian, Zhang Guowei, Wu Hanyu, . Design of inductive cavity for 3 MV induction voltage adder[J]. High Power Laser and Particle Beams, 23, 563-568(2011).

    [3] Guo Fan. Design perfmance of the induction cavities system f an induction voltage adder[D]. Hefei: University of Science Technology of China, 2019

    [4] Ramirez J J, Prestwich K R, Burgess E L, et al. The HermesIII program[C]Proceedings of Institute of Electrical Electronic Engineers Pulsed Power Conference. 1987: 294299.

    [5] Johnson D L, Ramirez J J, Huddle C W, et al. HermesIII prototype cavity tests[C]Proceedings of Institute of Electrical Electronic Engineers Pulsed Power Conference. 1987: 482485.

    [6] Wei Hao, Sun Fengju, Qiu Aici, . Optimization of azimuthal transmission lines for magnetically insulated induction voltage adders driven by single or double pulses[J]. High Voltage Engineering, 40, 2232-2237(2014).

    [7] Lai Dingguo, Zhang Yongmin, Xie Linshen, . Calibrating method of high voltage and current probe for fast pulse measurements[J]. High Power Laser and Particle Beams, 22, 2469-2472(2010).

    [8] Yao Weibo, Zhang Yongmin, Lai Dingguo, . Field calibration method for nanosecond pulse differential ring[J]. High Power Laser and Particle Beams, 24, 501-504(2012).

    [9] Guo Ning, Wang Liangping, Han Juanjuan, . Differential loop for measuring 1 MA/100 ns pulsed high current[J]. High Power Laser and Particle Beams, 24, 519-523(2012).

    [10] Wei Bing, Qing Yanling, Feng Shuping, . Current measurement for four-level magnetically-insulated transmission line[J]. High Power Laser and Particle Beams, 26, 085002(2014).

    [11] Hu Yixiang, Han Juanjuan, Guo Ning, . Differential B-dot monitor used for current measure of magnetically insulated transmission lines[J]. High Power Laser and Particle Beams, 24, 2511-2515(2012).

    [12] Wei Bing, Dan Jiakun, Fu Jiabin, . Low frequency response characteristics of B-dot monitor in cavity[J]. High Power Laser and Particle Beams, 28, 015026(2016).

    [13] Wei Bing, Kang Junjun, Wang Jie, . Hardware compensation of B-dot low frequency characteristics in cavity[J]. High Power Laser and Particle Beams, 32, 025021(2020).

    [14] GBT 18042000, General tolerances Tolerances f linear angular dimensions without individual tolerance indications[S]

    [15] Qian Shaosheng. Measurement uncertainty: processing representation of experimental data[M]. Beijing: Tsinghua University Press, 2002

    Xinjun Zhang, Weixi Luo, Yixiang Hu, Jiahui Yin, Wenyuan Zhou. A design of B-dot calibration simulator for azimuthal transmission line[J]. High Power Laser and Particle Beams, 2024, 36(5): 055002
    Download Citation