Xin Chen, Chen Li, Wei Zhao, Gang Huang, Jun Xiang, Tiantao Li, Jie Yang, Ping Liu, Zhen Qin. Development of a ferrite-silicon carbide hybrid high-order mode damper for accelerators[J]. High Power Laser and Particle Beams, 2025, 37(2): 024001
- High Power Laser and Particle Beams
- Vol. 37, Issue 2, 024001 (2025)
Fig. 1. Schematic of the hybrid high-order mode damper
Fig. 2. Hybrid high-order mode damper with an inner diameter of 320 mm and a height of 445 mm
Fig. 3. Simulation and measurement of absorption efficiency of hybrid high-order mode damper (no short piston)
Fig. 4. Simulation results of water temperature distribution for the hybrid high-order mode damper with an absorbed power of 10 kW
Fig. 5. Simulation results of absorbing materials temperature distribution for the hybrid high-order mode damper with an absorbed power of 10kW
Fig. 6. Temperature rise of inlet and outlet water under different absorbed power (about 0.4 MPa water pressure)
Fig. 7. Absorption power and absorption efficiency under different input power
|
Table 1. Simulation and measurement results of temperature distribution for the hybrid high-order mode damper with an absorbed power of 10 kW
|
Table 2. Performance test results of the hybrid high-order mode damper
|
Table 3. Design requirements and performance test results of the hybrid high-order mode damper
Set citation alerts for the article
Please enter your email address
© Copyright 2018-2021 | Chinese Laser Press. All Rights Reserved 沪ICP备15018463号-20