[1] BHATT APRIYADARSHINI SMOHANAKRISHNAN A Aet al. Physicalchemicaland geotechnical properties of coal fly ash: a global review［J］. Case Studies in Construction Materials201911: e00263.

[2] WANG CXU G GGU X Yet al. High value-added applications of coal fly ash in the form of porous materials: a review［J］. Ceramics International202147(16): 22302-22315.

[3] YIN YMA B YLI S Met al. Synthesis of Al2O3-SiC composite powders from coal ash in NaCl-KCl molten salts medium［J］. Ceramics International201642(16): 19225-19230.

[4] MA B YREN X MYIN Yet al. Effects of processing parameters and rare earths additions on preparation of Al2O3-SiC composite powders from coal ash［J］. Ceramics International201743(15): 11830-11837.

[5] MA B YSU CREN X Met al. Preparation and properties of porous mullite ceramics with high-closed porosity and high strength from fly ash via reaction synthesis process［J］. Journal of Alloys and Compounds2019803: 981-991.

[6] LIU JDONG Y CDONG X Fet al. Feasible recycling of industrial waste coal fly ash for preparation of anorthite-cordierite based porous ceramic membrane supports with addition of dolomite［J］. Journal of the European Ceramic Society201636(4): 1059-1071.

[7] ZHAO HWANG P YYU J Let al. A mechanistic study on the synthesis of β-SiAlON whiskers from coal fly ash［J］. Materials Research Bulletin201565: 47-52.

[8] VAKIFAHMETOGLU CZEYDANLI DCOLOMBO P. Porous polymer derived ceramics［J］. Materials Science and Engineering: R: Reports2016106: 1-30.

[9] DZMITRY MKLIMENTY B. A porous materials production with an electric discharge sintering［J］. International Journal of Refractory Metals and Hard Materials201659: 67-77.

[10] MA B YLI YLIU G Qet al. Preparation and properties of Al2O3-MgAl2O4 ceramic foams［J］. Ceramics International201541(2): 3237-3244.

[11] GE H BWANG GYUAN Bet al. Fabrication and microstructure of porous SiC ceramics using suspension emulsions as pore-forming agents［J］. Ceramics International201440(8): 11705-11711.

[12] YUAN LMA B YZHU Qet al. Preparation and properties of mullite-bonded porous fibrous mullite ceramics by an epoxy resin gel-casting process［J］. Ceramics International201743(7): 5478-5483.

[13] DENG X GWANG J KLIU J Het al. Low cost foam-gelcasting preparation and characterization of porous magnesium aluminate spinel (MgAl2O4) ceramics［J］. Ceramics International201642(16): 18215-18222.

[14] KAN X QDING JYU Cet al. Low-temperature fabrication of porous ZrC/C composite material from molten salts［J］. Ceramics International201743(8): 6377-6384.

[15] YOU Q WLIU Y SWAN J Jet al. Microstructure and properties of porous SiC ceramics by LPCVI technique regulation［J］. Ceramics International201743(15): 11855-11863.

[16] HWA L CRAJOO SNOOR A Met al. Recent advances in 3D printing of porous ceramics: a review［J］. Current Opinion in Solid State and Materials Science201721(6): 323-347.

[17] DANG WWANG W HWU P Fet al. Freeze-cast porous Al2O3 ceramics strengthened by up to 80% ceramics fibers［J］. Ceramics International202248(7): 9835-9841.

[18] CHATHURAPPAN RJAYAPAL A. Synthesis and characterization of coal fly ash based multipurpose ultrafiltration membrane［J］. Materialia202225: 101548.

[19] LIU T YTANG YHAN Let al. Recycling of harmful waste lead-zinc mine tailings and fly ash for preparation of inorganic porous ceramics［J］. Ceramics International201743(6): 4910-4918.

[20] AL-QADHI ELI G YNI Y X. Influence of a two-stage sintering process on characteristics of porous ceramics produced with sewage sludge and coal ash as low-cost raw materials［J］. Advances in Materials Science and Engineering20192019: 1-12.

[21] MIAO Q DZHANG Z SXIA J P. Preparation of low-temperature ceramic foam material with fly ash［J］. Bulletin of the Chinese Ceramic Society201029(6): 1463-1467.

[22] SHEN J JXUE Q HLIU Y Jet al. Optimization for the manufacturing process of fly ash foamed ceramics［J］. Bulletin of the Chinese Ceramic Society201635(2): 617-622.

[23] ZHANG FNIU H HLI Wet al. Investigation on the manufacturing process and properties of ceramic wall brick and floor tile with fly ash［J］. Bulletin of the Chinese Ceramic Society201837(6): 1941-1945.