[2] YU R, SPIESZ P, BROUWERS H J H. Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)［J］. Cement and Concrete Research, 2014, 56: 29-39.
[5] AHMED T, ELCHALAKANI M, BASARIR H, et al. Development of ECO-UHPC utilizing gold mine tailings as quartz sand alternative［J］. Cleaner Engineering and Technology, 2021, 4: 100176.
[6] CHEN Q, MA R, LI H X, et al. Effect of chloride attack on the bonded concrete system repaired by UHPC［J］. Construction and Building Materials, 2021, 272: 121971.
[7] LI P P, YU Q L, BROUWERS H J H. Effect of PCE-type superplasticizer on early-age behaviour of ultra-high performance concrete (UHPC)［J］. Construction and Building Materials, 2017, 153: 740-750.
[8] DING M X, YU R, FENG Y, et al. Possibility and advantages of producing an ultra-high performance concrete (UHPC) with ultra-low cement content［J］. Construction and Building Materials, 2021, 273: 122023.
[10] VANCE K, KUMAR A, SANT G, et al. The rheological properties of ternary binders containing Portland cement, limestone, and metakaolin or fly ash［J］. Cement and Concrete Research, 2013, 52: 196-207.
[12] CAI Y X, LIU Q F, YU L W, et al. An experimental and numerical investigation of coarse aggregate settlement in fresh concrete under vibration［J］. Cement and Concrete Composites, 2021, 122: 104153.
[13] WANG R, GAO X J, ZHANG J Y, et al. Spatial distribution of steel fibers and air bubbles in UHPC cylinder determined by X-ray CT method［J］. Construction and Building Materials, 2018, 160: 39-47.
[14] WANG R, GAO X J, HUANG H H, et al. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC［J］. Construction and Building Materials, 2017, 144: 65-73.
[15] LOWKE D, VANDENBERG A, PIERRE A, et al. Injection 3D concrete printing in a carrier liquid-underlying physics and applications to lightweight space frame structures［J］. Cement and Concrete Composites, 2021, 124: 104169.
[16] ROUSSEL N. A theoretical frame to study stability of fresh concrete［J］. Materials and Structures, 2007, 39(1): 81-91.
[17] QIAN Y, LESAGE K, EL CHEIKH K, et al. Effect of polycarboxylate ether superplasticizer (PCE) on dynamic yield stress, thixotropy and flocculation state of fresh cement pastes in consideration of the critical micelle concentration (CMC)［J］. Cement and Concrete Research, 2018, 107: 75-84.
[18] QIAN Y, MA S W, KAWASHIMA S, et al. Rheological characterization of the viscoelastic solid-like properties of fresh cement pastes with nanoclay addition［J］. Theoretical and Applied Fracture Mechanics, 2019, 103: 102262.
[19] XIE Y, LI J, LU Z Y, et al. Effects of bentonite slurry on air-void structure and properties of foamed concrete［J］. Construction and Building Materials, 2018, 179: 207-219.
[23] LEI L, PLANK J. A concept for a polycarboxylate superplasticizer possessing enhanced clay tolerance［J］. Cement and Concrete Research, 2012, 42(10): 1299-1306.
[24] CHEN G, LEI J H, DU Y, et al. A polycarboxylate as a superplasticizer for montmorillonite clay in cement: adsorption and tolerance studies［J］. Arabian Journal of Chemistry, 2018, 11(6): 747-755.
[25] XIE Y, LI J, LU Z Y, et al. Preparation and properties of ultra-lightweight EPS concrete based on pre-saturated bentonite［J］. Construction and Building Materials, 2019, 195: 505-514.
