[2] KOYANAGI T, KATOH Y, NOZAWA T, et al. Recent progress in the development of SiC composites for nuclear fusion applications［J］. J Nuc Mater, 2018, 511: 544-555.

[4] WANG J, CAO L Y, ZHANG Y H, et al. Effect of mass transfer channels on flexural strength of C/SiC composites fabricated by femtosecond laser assisted CVI method with optimized laser power［J］. J Adv Ceram, 2021, 10(2): 227-236.

[6] ROSSI G A, PELLETIER P J. Joining of SiC parts by polishing and hipping［P］. US Patent, 4925608, 1990-5-15.

[7] GRASSO S, TATARKO P, RIZZO S, et al. Joining of β-SiC by spark plasma sintering［J］. J Eur Ceram Soc, 2014, 34(7): 1681-1686.

[8] LI H X, KOYANAGI T, ANG C, et al. Electric current-assisted direct joining of silicon carbide［J］. J Eur Ceram Soc, 2021, 41(5): 3072-3081.

[9] LI S J, MAO Y W, HE Y H. Joining of SiC ceramic by high temperature brazing using Ni-Cr-SiC powders as filler［J］. Key Eng Mater, 2007, 336: 2394-2397.

[10] LIU Y, QI Q, ZHU Y Z, et al. Microstructure and joining strength evaluation of SiC/SiC joints brazed with SiCp/Ag-Cu-Ti hybrid tapes［J］. J Adhes Sci Technol, 2015, 29(15): 1563-1571.

[11] ZHOU B F, FENG K Q. Zr-Cu alloy filler metal for brazing SiC ceramic［J］. RSC Adv, 2018, 8(46): 26251-26254.

[12] CHEN Z B, HU S P, SONG X G, et al. Brazing of SiC ceramics pretreated by chromium coating using inactive AgCu filler metal［J］. Int J Appl Ceram Technol, 2020, 17(6): 2591-2597.

[13] FAN S W, LIU J L, MA X, et al. Microstructure and properties of SiCf/SiC joint brazed by Y-Al-Si-O glass［J］. Ceram Int, 2018, 44(7): 8656-8663.

[15] SUN Z, CHEN X, MAO Y, et al. Joining of SiC ceramics using CaO-Al2O3-SiO2 (CAS) glass ceramics［J］. J Eur Ceram Soc, 2020, 40(2): 267-275.

[16] FANG J, ZHANG J, LIU C F, et al. A novel glass-ceramic with high crystallinity for joining of SiC ceramic［J］. Mater Lett, 2020, 277: 128318.

[17] ZHOU X B, HAN Y H, SHEN X F, et al. Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology［J］. J Nuc Mater, 2015, 466: 322-327.

[18] VALENZA F, GAMBARO S, MUOLO M L, et al. Wetting of SiC by Al-Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C2［J］. J Eur Ceram Soc, 2018, 38(11): 3727-3734.

[19] FITRIANI P, SEPTIADI A, HYUK J D, et al. Joining of SiC monoliths using a thin MAX phase tape and the elimination of joining layer by solid-state diffusion［J］. J Eur Ceram Soc, 2018, 38(10): 3433-3440.

[20] WAN P, LI M, XU K, et al. Seamless joining of silicon carbide ceramics through an sacrificial interlayer of Dy3Si2C2［J］. J Eur Ceram Soc, 2019, 39(16): 5457-5462.

[21] ZHOU X B, LIU J W, ZOU S R, et al. Almost seamless joining of SiC using an in-situ reaction transition phase of Y3Si2C2［J］. J Eur Ceram Soc, 2020, 40(2): 259-266.

[22] JUNG H C, PARK Y H, PARK J S, et al. R&D of joining technology for SiC components with channel［J］. J Nuc Mater, 2009, 386: 847-851.

[23] KIM Y H, JANG S H, KIM Y W. Joining of silicon carbide ceramics using a silicon carbide tape［J］. Int J Appl Ceram Technol, 2019, 16(4): 1295-1303.

[24] NIU W B, XUE J X, WU L X, et al. Low-temperature joining of SiC ceramics using NITE phase with Al2O3-Ho2O3 additive［J］. J Am Ceram Soc, 2020, 103(2): 731-736.

[25] RABIN B H. Joining of fiber-reinforced SiC composites by in situ reaction methods［J］. Mater Sci Eng A, 1990, 130(1): L1-L5.

[26] GREIL P. Active-filler-controlled pyrolysis of preceramic polymers［J］. J Am Ceram Soc, 1995, 78(4): 835-848.

[27] NAKANO H, WATARI K, KINEMUCHI Y, et al. Microstructural characterization of high-thermal-conductivity SiC ceramics［J］. J Eur Ceram Soc, 2004, 24(14): 3685-3690.

[29] ZHANG K Q, ZHANG L, HE R J, et al. Joining of Cf/SiC ceramic matrix composites: A review［J］. Adv Mater Sci Eng, 2018, 2018: 6176054.

[30] LIU G W, ZHANG X Z, YANG J, et al. Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior［J］. J Adv Ceram, 2019, 8(1): 19-38.

[31] YOON D H, REIMANIS I E. A review on the joining of SiC for high-temperature applications［J］. J Korean Ceram Soc, 2020, 57(3): 246-270.

[32] SCITI D, BELLOSI A. Effects of additives on densification, microstructure and properties of liquid-phase sintered silicon carbide［J］. Mater Sci, 2000, 35(15): 3849-3855.

[33] SHIMODA K, KOHYAMA A, HINOKI T. High mechanical performance SiC/SiC composites by NITE process with tailoring of appropriate fabrication temperature to fiber volume fraction［J］. Compos Sci Technol, 2009, 69(10): 1623-1628.

[34] MULLA M A, KRSTIC V D. Pressureless sintering of β-SiC with Al2O3 additions［J］. Mater Sci, 1994, 29(4): 934-938.

[35] DONG S, KATOH Y, KOHYAMA A. Preparation of SiC/SiC composites by hot pressing, using Tyranno-SA fiber as reinforcement［J］. J Am Ceram Soc, 2003, 86(1): 26-32.

[36] KATOH Y, DONG S M, KOHYAMA A. Thermo-mechanical properties and microstructure of silicon carbide composites fabricated by nano-infiltrated transient eutectoid process［J］. Fusion Eng Des, 2002, 61: 723-731.

[37] HINOKI T, EIZA N, SON S, et al. Development of joining and coating technique for SiC and SiC/SiC Composites utilizing NITE processing［J］. Ceram Eng Sci Proc, 2005, 26: 399-405.

[38] KIRIANOV A, YAMAGUCHI A. Sintering and oxidation resistance of compositions in the SiC-La2O3-Al2O3-Cr2O3 system I. Pressureless sintering of compositions in the SiC-La2O3-Al2O3-Cr2O3 system at low temperatures［J］. Ceram Int, 2000, 26(4): 441-446.

[39] SHIMODA K, KOHYAMA A, HINOKI T. High mechanical performance SiC/SiC composites by NITE process with tailoring of appropriate fabrication temperature to fiber volume fraction［J］. Compos Sci Technol, 2009, 69(10): 1623-1628.

[40] YOON H K, JUNG H C, HINOKI T, et al. Characteristics of shear strength for joined SiC-SiC ceramics［J］. Trans Korean Soc Mech Eng A, 2014, 38(5): 483-487.

[41] KATOH Y, KOYANAGI T, KIGGANS JR J O, et al. M3FT-16OR020202112-Report on viability of hydrothermal corrosion resistant SiC/SiC Joint development［R］. ORNL/TM-/274, Idaho Falls: INL, 2016.

[42] WU L X, LIN R L, NIU W B, et al. Nano-infiltration and transient eutectic (NITE) phase joining SiC ceramics at 1500 ℃［J］. Ceram Int, 2019, 45(18): 24927-24931.

[43] KATOH Y, SNEAD L L, CHENG T, et al. Radiation-tolerant joining technologies for silicon carbide ceramics and composites［J］. J Nuc Mater, 2014, 448(1-3): 497-511.

[44] BRAGG-SITTON S M. Light water reactor sustainability program status of silicon carbide joining technology development［R］. INL/EXT-13-30268, Idaho Falls: INL, 2013: 5.

[45] FERNNDEZ J M, MUNOZ A, VARELA-FERIA F M, et al. Interfacial and thermomechanical characterization of reaction formed joints in silicon carbide-based materials［J］. J Eur Ceram Soc, 2000, 20(14-15): 2641-2648.

[46] SCACE R I, SLACK G A. Solubility of carbon in silicon and germanium［J］. Chem Phys, 1959, 30(6): 1551-1555.

[47] NESS J N, PAGE T F. Microstructural evolution in reaction-bonded silicon carbide［J］. J Mater Sci, 1986, 21(4): 1377-1397.

[48] SINGH M. Microstructure and mechanical properties of reaction-formed joints in reaction-bonded silicon carbide ceramics［J］. J Mater Sci, 1998, 33(24): 5781-5787.

[49] SUNG H W, KIM Y H, KIM D J. Joining of reaction bonded silicon carbide using self-infiltration of residual Si present in the RBSC. Ceram Int, 2020, 46(18): 28800-28805.

[52] LUO Z H, JIANG D L, ZHANG J X, et al. Development of SiC-SiC joint by reaction bonding method using SiC/C tapes as the interlayer［J］. J Eur Ceram Soc, 2012, 32(14): 3819-3824.

[53] WANG Y X, TAN S H, JIANG D L. The fabrication of reaction-formed silicon carbide with controlled microstructure by infiltrating a pure carbon preform with molten Si［J］. Ceram Int, 2004, 30(3): 435-439.

[54] WU X S, PEI BB, ZHU Y Z, et al. Joining of the Cf/SiC composites by a one-step Si infiltration reaction bonding［J］. Mater Charact, 2019, 155: 109799.

[55] LEWINSOHN C A, SINGH M, SHIBAYAMA T, et al. Joining of silicon carbide composites for fusion energy applications［J］. J Nuc Mater, 2000, 283: 1258-1261.

[56] Zhang A F, Chen Y C, Chen Z Q, et al. Joining of silicon carbide ceramic for optical application by reaction bonded technology［C］// JIANG W H ed. 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes. International Society for Optics and Photonics, Dalian, China, 2010: 765410.

[57] GUPTA R K, MISHRA R, KUMAR S, et al. Development of Polycarbosilane (PCS) Polymer and PCS-Derived SiC Fibers and Their Composites［M］//Mahajan, Y R ed. Handbook of Advanced Ceramics and Composites: Defense, Security, Aerospace and Energy Applications, Cham, Switzerland: Springer International Publishing, 2020: 913-928.

[58] Zhao C C, Lin R L, Dai M M, et al. Facile joining of SiC ceramics with screen-printed polycarbosilane without pressure［J］. J Eur Ceram Soc, 2021, 41(3): 2157-2161.

[59] COLOMBO P, RICCARDI B, DONATO A, et al. Joining of SiC/SiCf ceramic matrix composites for fusion reactor blanket applications［J］. J Nuc Mater, 2000, 278(2-3): 127-135.

[60] SHERWOOD W J, WHITMARSH C K, JACOBS J M, et al. Joining ceramic composites using active metal/HPCS preceramic polymer slurries［C］//SINGH J P ed. Proceedings of the 21st Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings. Hoboken, New Jersey, American Ceramic Society, 1997: 177-182.

[61] ZHENG J, NAL , AKINC M. Green state joining of silicon carbide using polycarbosilane［J］. J Am Ceram Soc, 2000, 83(7): 1687-1692.

[62] WANG X Z, WANG J, WANG H. Synthesis of a novel preceramic polymer (V-PMS) and its performance in heat-resistant organic adhesives for joining SiC ceramic［J］. J Eur Ceram Soc, 2012, 32(12): 3415-3422.

[63] WANG X Z, WANG J, WANG H. Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS) ［J］. Ceram Int, 2015, 41(6): 7283-7288.

[64] KHALIFA H E, KOYANAGI T, JACOBSEN G M, et al. Radiation stable, hybrid, chemical vapor infiltration/preceramic polymer joining of silicon carbide components［J］. J Nucl Mater, 2017, 487: 91-95.

[65] WANG X Z, SHI J, WANG H. Preparation, properties, and structural evolution of a novel polyborosilazane adhesive, temperature-resistant to 1600 ℃ for joining SiC ceramics［J］. J Alloys Compd, 2019, 772: 912-919.

[66] LI S J, YUAN X K, ZHANG T, et al. Joining of SiC ceramic to high strength graphite using polysiloxane with active additive［J］. Key Eng Mater, 2007, 353-358: 2092-2095

[67] LI H, ZHANG L, CHENG L, et al. Effect of the polycarbosilane structure on its final ceramic yield［J］. J Eur Ceram Soc, 2008, 28(4): 887-891.

[68] TANG M, LIU Y, ZHANG H, et al. Preparation and microstructure characterization of SiC/SiC joints reinforced by in-situ SiC nanowires［J］. Ceram Int, 2020, 46(8): 12559-12565.

[69] LIU H L, LI S J, CHEN Z J. Joining of Cf/SiC ceramic matrix composite using SiC-Si3N4 preceramic polymer［J］ Mater Sci Forum., 2005, 475: 1267-1270.

[70] HENAGER JR C H, SHIN Y, BLUM Y, et al. Coatings and joining for SiC and SiC-composites for nuclear energy systems［J］. J Nuc Mater, 2007, 367: 1139-1143.

[71] SUO J, CHEN C H, ZHENG W W, et al. Effects of pyrolysis temperature and fillers on joining of ceramics via silicone resin［J］. Trans. Nonferrous Met. Soc. China, 2005, 15(6): 1322-1327

[72] JEONG D H, SEPTIADI A, FITRIANI P, et al. Joining of SiCf/SiC using polycarbosilane and polysilazane preceramic mixtures［J］. Ceram Int, 2018, 44(9): 10443-10450.

[73] COLOMBO P, DONATO A, RICCARDI B, et al. Joining SiC-based ceramics and composites with preceramic polymers［J］. Ceram Trans (USA), 2002, 144: 323-334.

[74] Zhou B F, Feng K Q, Zhou H L. Joining of SiC ceramic by using the liquid polyvinylphenylsiloxane［J］. Adv Appl Ceram, 2018, 117(4): 212-216.

[76] LEE D H, JANG H W, KIM D J, et al. Joining of RBSiC using a preceramic polymer with Al［J］. Adv Appl Ceram Res, 2009, 10(3): 263-265.

[77] LU Y W, ZHANG Y D, HU H F, et al. Online-joining of C/SiC-C/SiC via precursor infiltration and pyrolysis process［J］. Key Eng Mater, 2008, 368-372(p.2): 1044-1046.

[78] SUO J, CHEN Z H, HAN W M, et al. Joining of 3D-Cf/SiC composites via silicone resin as precursor-influence of pyrolysis temperature and inert fillers［J］. Rare Metal Mater Eng, 2005, 34: 298-301.