[1] ODEN L L, MCCUNE R A. Phase equilibria in the Al-Si-C system［J］. Metall. Trans A, 1987, 18(12): 2005-2014.
[2] HUANG X X, WEN G W. Mechanical properties of Al4SiC4 bulk ceramics produced by solid state reaction［J］. Ceram Int, 2007, 33(3): 453-458.
[3] TAKAHASHI N, HASHIMOTO S, OKAMOTO N, et al. Improvement in heat resistivity of alkaline earth silicate fiber boards by Al4SiC4 coating［J］. Int J Appl Ceram Technol, 2019, 16(6): 2316-2321.
[4] YAMAGUCHI A, ZHANG S W. Synthesis and some properties of Al4SiC4［J］. J Ceram Soc Jpn, 1995, 103(1193): 20-24.
[5] HUANG X X, WEN G W, CHENG X M, et al. Oxidation behavior of Al4SiC4 ceramic up to 1 700 °C［J］. Corros Sci, 2007, 49(5): 2059-2070.
[6] YU C, DENG C J, ZHU H X, et al. Slag corrosion resistance of Al4SiC4［J］. Int J Mater Res, 2017, 108(3): 249-252.
[9] LI Y F, XIAO B, SUN L, et al. A theoretical study of dielectric tensor, Born effective charges, LO-TO splitting and infrared response of Al4SiC4 and Al4Si2C5［J］. J Alloys Compd, 2017, 692: 713-719.
[10] LEE J S, LEE S H, NISHIMURA T, et al. A ternary compound additive for vacuum densification of β-silicon carbide at low temperature［J］. J Eur Ceram Soc, 2009, 29(16): 3419-3423.
[11] HUANG X X, WEN G W. Reaction synthesis of aluminum silicon carbide ceramics［J］. Mater Chem Phys, 2006, 97(1): 193-199.
[12] PEDESSEAU L, EVEN J, MODREANU M, et al. Al4SiC4 wurtzite crystal: Structural, optoelectronic, elastic, and piezoelectric properties［J］. Apl Mater, 2015, 3(12): 121101.
[13] YU C, DONG B, CHEN Y F, et al. Enhanced oxidation resistance of low-carbon MgO-C refractories with ternary carbides: a review［J］. J Iron Steel Res Int, 2022, 29(7): 1052-1062.
[14] ZHANG S W, YAMAGUCHI A. Effect of Al4SiC4 addition to carbon-containing refractories［J］. J Ceram Soc Jpn, 1995, 103(1195): 235-239.
[15] YU C, Dong B, Deng C J, et al. In-situ formation of plate-like Al4O4C and MWCNTs in Al2O3-C refractories with Al4SiC4 additives［J］. Mater Chem Phys, 2021, 263: 124363.
[16] YU C, DENG C J, ZHU H X, et al. Synthesis of hexagonal plate-like Al4Si2C5 and the effect of Al4Si2C5 addition to Al2O3-C refractory［J］. Adv Powder Technol, 2017, 28(1): 177-184.
[17] LUZ A P, MIGLIOLI M M, SOUZA T M, et al. Effect of Al4SiC4 on the Al2O3-SiC-SiO2-C refractory castables performance［J］. Ceram Int, 2012, 38(5): 3791-3800.
[18] WU X X, DENG C J, DI J H, et al. Fabrication of novel AlN-SiC-C refractories by nitrogen gas-pressure sintering of Al4SiC4［J］. J Eur Ceram Soc, 2022, 42(8): 3634-3643.
[19] ZHAO C Y, CHEN G Y, GUO C Y, et al. Preparation of Al4SiC4 with higher aspect ratio by a novel two-step method［J］. Cream Int, 2022, 48(16): 23908-23913.
[20] YU C, YUAN W J, DENG C J, et al. Synthesis of hexagonal plate-like Al4SiC4 from calcined bauxite, silica and carbon black［J］. Powder Technol, 2013, 247: 76-80.
[21] XING X M, LI B, CHEN J H, et al. Formation mechanism of large size plate-like Al4SiC4 grains by carbothermal reduction method［J］. CrystEngComm, 2018, 20(10): 1399-1404.
[22] INOUE K, YAMAGUCHI A. Temperature dependence of electrical resistivity of the Al4SiC4 sintered bodies prepared by pulse electronic current sintering［J］. J Ceram Soc Jpn, 2003, 111(4): 267-270.
[23] ITATANI K, TAKAHASHI F, AIZAWA M, et al. Densification and microstructural developments during the sintering of aluminium silicon carbide［J］. J Mater Sci, 2002, 37(2): 335-342.
[24] GABALLA O, COOK B, RUSSELL A. Formation, densification, and selected mechanical properties of hot pressed Al4SiC4, Al4SiC4 with 30 vol.% WC, and Al4SiC4 with 30 vol.% TiC［J］. Cream Int, 2011, 37(8): 3117-3121.
[25] LIU H, WU H B, ZHANG H H, et al. Preparation, microstructure and ion-irradiation damage behavior of Al4SiC4-added SiC ceramics［J］. Cream Int, 2022, 48(17): 24592-24598.
[27] SERBENYUK T B, PRIKHNA T O, SVERDUN V B, et al. Effect of the additive of Y2O3 on the structure formation and properties of composite materials based on AlN-SiC［J］. J Superhard Mater, 2018, 40(1): 8-15.
[32] XU Y H, JI Z X, YANG Z Y, et al. Densification and comprehensive properties of h-BN-based refractories with in-situ formation of Y3Al5O12［J］. J Alloys Compd, 2021, 875: 160018.
[33] ZHANG Z, DUAN X M, QIU B F, et al. Anisotropic properties of textured h-BN matrix ceramics prepared using 3Y2O3-5Al2O3(-4MgO) as sintering additives［J］. J Eur Ceram Soc, 2019, 39(5): 1788-1795.
[34] LEE J Y, HINOKI T. Densification behavior of monolithic SiC fabricated by pressureless liquid phase sintering method［J］. Open Ceram, 2022, 11: 100289.
[35] YANG S L, ZHU Y X, FAN L, et al. Preparation and mechanical properties of SiCW-Al2O3-YAG ceramic composite by hot oscillatory pressing［J］. Cream Int, 2021, 47(15): 21231-21235
[36] BURKE K, WAGNER L O. DFT in a nutshell［J］. Int J Quantum Chem, 2013, 113(2): 96-101.
[37] CLARK S J, SEGALL M D, PICKARD C J, et al. First principles methods using CASTEP［J］. Z Kristallogr Cryst Mater, 2005, 220(5-6): 567-570.
[38] COZZAN C, GRIFFITH K J, LAURITA G, et al. Structural evolution and atom clustering in β-SiAlON: β-Si6-zAlzOzN8-z［J］. Inorg Chem, 2017, 56(4): 2153-2158.
[39] ERNZERHOF M, SCUSERIA G E. Assessment of the Perdew-Burke-Ernzerhof exchange-correlation functional［J］. J Chem Phys, 1999, 110(11): 5029-5036.
[40] YANG M Z, CHANG B K, HAO G H, et al. Theoretical study on electronic structure and optical properties of Ga0.75Al0.25N (0 0 0 1) surface［J］. Appl Surf Sci, 2013, 273: 111-117.
[41] HUANG J G, GUO L J, LI K J, et al. Microstructures and oxidation behaviors of Al-modified and Al2O3-modified SiC coatings on carbon/carbon composites via pack cementation［J］. Cream Int, 2021, 47(6): 8105-8112.
[42] LIAO T, WANG J Y, ZHOU Y C. Atomistic deformation modes and intrinsic brittleness of Al4SiC4: A first-principles investigation［J］. Phys Rev B, 2006, 74(17): 174112.
[43] YU C, CHENG K R, DING J, et al. Synthesis and characterisation of Al4O4C nanorod/CNT composites［J］. Cream Int, 2017, 43(14): 11415-11420.
[44] PAN Z, FABRICHNAYA O, SEIFERT H J, et al. Thermodynamic evaluation of the Si-C-Al-Y-O system for LPS-SiC application［J］. J Phase Equilib Diffus, 2010, 31(3): 238-249.
[45] LIU J W, ZHOU X B, TATARKO P, et al. Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering［J］. J Adv Ceram, 2020, 9(2): 193-203.
[48] SUN L, GAO Y M, LI Y F, et al. Structural, bonding, anisotropic mechanical and thermal properties of Al4SiC4 and Al4Si2C5 by first- principles investigations［J］. J Asian Ceram Soc, 2016, 4(3): 289-298.
[49] WANG Z L. Transmission electron microscopy of shape-controlled nanocrystals and their assemblies［J］. J Phys Chem B, 2000, 104(6): 1153-1175.
[51] DUCKWORTH W. Discussion of ryshkewitch paper by winston duckworth［J］. J Am Ceram Soc, 1953, 36: 68-69.
[52] SPRIGGS R M. Expression for effect of porosity on elastic modulus of polycrystalline refractory materials, particularly aluminum oxide［J］. J Am Ceram Soc, 1961, 44: 628-629.
