• High Power Laser and Particle Beams
  • Vol. 33, Issue 6, 065016 (2021)
Jiyuan Yan1、2, Guishu Liang2, Yuchan Kang2, Chengkai Peng2, Zijian Wan2, Tianshu Lü2, and Qing Xie1、2
Author Affiliations
  • 1State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206, China
  • 2School of Electrical and Electronic Engineering, North China Electric Power University, Baoding, 071003, China
  • show less
    DOI: 10.11884/HPLPB202133.210100 Cite this Article
    Jiyuan Yan, Guishu Liang, Yuchan Kang, Chengkai Peng, Zijian Wan, Tianshu Lü, Qing Xie. Effect of plasma surface gradient etching on surface flashover performance of epoxy resin[J]. High Power Laser and Particle Beams, 2021, 33(6): 065016 Copy Citation Text show less
    References

    [1] Shao Tao, Kong Fei, Lin Haofan, et al. Correlation between surface charge and DC surface flashover of plasma treated epoxy resin[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 25, 1267-1274(2018).

    [2] Li Chuanyang, Shahsavarian T, Baferani M A, et al. High temperature insulation materials for DC cable insulation—Part Ⅲ: Oegradation and surface breakdown[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 28, 240-247(2021).

    [5] Yin Kai, Xie Qing, Ruan Haoou, et al. Causation of ultra-high surface insulation of Bi0.95Y0.05FeO3/epoxy composites: simultaneous sine-variations of dielectric and trap properties with filler content[J]. Composites Science and Technology, 197, 108199(2020).

    [7] Du B X, Liang H C, Li J, et al. Electrical field distribution along SG6/N2 filled DC-GIS/GIL epoxy spacer[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 25, 1202-1210(2018).

    [8] Cheng Guoxin, Cai Dan, Hong Zhiqiang, et al. Variation in time lags of vacuum surface flashover utilizing a periodically grooved dielectric[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 20, 1942-1950(2013).

    [9] Yamamoto O, Takuma T, Fukuda M, et al. Improving withstand voltage by roughening the surface of an insulating spacer used in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 10, 550-556(2003).

    [11] Li Chuanyang, Zhu Yujie, Hu Jun, et al. Charge cluster triggers unpredictable insulation surface flashover in pressurized SF6[J]. Journal of Physics D: Applied Physics, 54, 015308(2021).

    [12] Ruan Haoou, Xie Qing, Lv Fangcheng, et al. Enhanced breakdown strength of BN/ER by the 2D ordinal tiled structure of fillers[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 28, 423-430(2021).

    [14] Ruan Haoou, Xie Qing, Lü Fangcheng, et al. Filler fluorination of nanoTiO2/ER composites and their surface insulation properties: A comparison of dielectric barrier discharge and chemical solution fluorination[J]. Journal of Physics D: Applied Physics, 53, 145204(2020).

    [18] An Zhenlian, Yin Qianqian, Liu Yaqiang, et al. Modulation of surface electrical properties of epoxy resin insulator by changing fluorination temperature and time[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 22, 526-534(2015).

    [19] Li Chuanyang, Hu Jun, Lin Chuanjie, et al. The control mechanism of surface traps on surface charge behavior in alumina-filled epoxy composites[J]. Journal of Physics D: Applied Physics, 49, 445304(2016).

    [21] Xue Jianyi, Wang Han, Chen Junhong, et al. Effects of surface roughness on surface charge accumulation characteristics and surface flashover performance of alumina-filled epoxy resin spacers[J]. Journal of Applied Physics, 124, 083302(2018).

    [25] Kostov K G, Nishime T M C, Castro A H R, et al. Surface modification of polymeric materials by cold atmospheric plasma jet[J]. Applied Surface Science, 314, 367-375(2014).

    [27] Shao Tao, Zhou Yixiao, Zhang Cheng, et al. Surface modification of polymethyl-methacrylate using atmospheric pressure argon plasma jets to improve surface flashover performance in vacuum[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 22, 1747-1754(2015).

    [29] Chen Sile, Wang Shuai, Wang Yibo, et al. Surface modification of epoxy resin using He/CF4 atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum[J]. Applied Surface Science, 414, 107-113(2017).

    [30] Xie Qing, Lin Haofan, Zhang Shuai, et al. Deposition of SiCxHyOz thin film on epoxy resin by nanosecond pulsed APPJ for improving the surface insulating performance[J]. Plasma Science and Technology, 20, 025504(2018).

    [35] Li Shengtao, Zhang Tuo, Sun Jian, et al. Improvement of surface flashover performance in vacuum by co-firing Mo/Al2O3 cermets and Al2O3 ceramics[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 17, 1931-1937(2010).

    [38] Du B X, Ran Z Y, Li J, et al. Novel insulator with interfacial σ-FGM for DC compact gaseous insulated pipeline[J]. IEEE Transactions on Dielectrics and Electrical Insulation, 26, 818-825(2019).

    [40] Li Chuanyang, Lin Chuanjie, Chen Geng, et al. Field-dependent charging phenomenon of HVDC spacers based on dominant charge behaviors[J]. Applied Physics Letters, 114, 202904(2019).

    Jiyuan Yan, Guishu Liang, Yuchan Kang, Chengkai Peng, Zijian Wan, Tianshu Lü, Qing Xie. Effect of plasma surface gradient etching on surface flashover performance of epoxy resin[J]. High Power Laser and Particle Beams, 2021, 33(6): 065016
    Download Citation