Large Electron Emission Current and High Electron Emission Stability of Hexagonal Close-packed Multi-lamination-layer Carbon Nanotube Cathode

LI Yu-kui; LIU Yun-peng; WU Chao; YANG Juan

doi:10.3788/gzxb20184705.0525002

[1] TRUONG T K, LEE Y, SUH D. Multifunctional characterization of carbon nanotube sheets, yarns, and their composites［J］. Current Applied Physics, 2016, 16(9): 1250-1258.

[2] BULLER S, HEISE-PODLESKA M, PFANDER N, et al. Carbon nanotubes as conducting support for potential Mn-oxide electrocatalysts: lnfluences of pre-treatment procedures［J］. Journal of Energy Chemistry, 2016, 25(2): 265-271.

[3] MALLAKPOUR S, ZADEHNAZARI A. Preparation of dopamine-functionalized multi-wall carbon nanotube/ poly (amide-imide) composites and their thermal and mechanical properties［J］. New Carbon Materials, 2016, 31(1): 18-30.

[4] AAZAM E S. Visible light photocatalytic degradation of thiophene using Ag-TiO2/ multi-walled carbon nanotubes nanocomposite［J］. Ceramics International, 2014, 40(5): 6705-6711.

[5] DHIMAN S, KUMAR R, DHARAMVIR K. Study of structural and electronic properties of doped arm chair single-walled carbon nanotube［J］. Materials Today: Proceedings, 2016, 3(6): 1820-1827.

[6] SAMIEE L, SHOGHI F, MAGHSODI A. In situ functionalization of mesoporous carbon electrodes with carbon nanotubes for proton exchange membrane fuel-cell application［J］. Materials Chemistry and Physics, 2014, 143(3): 1228-1235.

[7] KANDASAMY R, MUHAIMIN I, MOHAMMAD R. Single walled carbon nanotubes on MHD unsteady flow over a porous wedge with thermal radiation with variable stream conditions［J］. Alexandria Engineering Journal, 2016, 55(1): 275-285.

[8] KWAK E H, YOON K B, JEONG G H. Comparative study on diameter distribution of single-walled carbon nanotubes using growth templates with different pore sizes: Zeolite-L, ZSM-5, and MCM-41［J］. Current Applied Physics, 2014, 14(12): 1633-1638.

[9] MAITY S, DAS N S, SANTRA S, et al. CdS nanoparticle coated carbon nanotube through magnetron sputtering and its improved field emission performance［J］. Current Applied Physics, 2016, 16(10): 1293-1302.

[10] HSIEH C T, GU J L, TZOU D Y, et al. Microwave deposition of Pt catalysts on carbon nanotubes with different oxidation levels for formic acid oxidation［J］. International Journal of Hydrogen Energy, 2013, 38(25): 10345-10353.

[11] KAVINKUMAR T, MANIVANNAN S. Synthesis, characterization and gas sensing properties of grapheme oxide-multiwalled carbon nanotube composite［J］. Journal of Materials Science & Technology, 2016, 32(7): 626-632.

[12] KWAK J H, HAN J K, KANG S W, et al. Dielectric relaxation properties of Pb TiO3-multiwalled carbon nanotube composites prepared by a sol-gel process［J］. Ceramics International, 2016, 42(7): 8165-8169.

[13] DARBARI S. Model calculation and empirical investigation of enhanced field emission behavior of branched carbon nanostructures［J］. Current Applied Physics, 2014, 14(8): 1092-1098.

[14] HAYAT T, HUSSAIN Z, ALSAEDI A, et al. Carbon nanotubes effects in the stagnation point flow towards a nonlinear stretching sheet with variable thickness［J］. Advanced Powder Technology, 2016, 27(4): 1677-1688.

[15] YOUH M J, CHOU Y P, LIU Y M, et al. Simulation and modeling of alignment-free field emission X-ray tubes［J］. Applied Mathematical Modelling, 2015, 39(19): 5896-5906.

[16] SMITHSON C, WU Y, WIGGLESWORTH T, et al. Using unsorted single-wall carbon nanotubes to enhance mobility of diketopyrrolopyrrole-quarterthiophene copolymer in thin-film transistors［J］. Organic Electronics, 2014, 15(11): 2639-2646.

[17] SARWAR M S U, DAHMARDEH M, NOJEH A, et al. Batch-mode micropatterning of carbon nanotube forests using UV-LIGA assisted micro-electro-discharge machining［J］. Journal of Materials Processing Technology, 2014, 214(11): 2537-2544.

[18] THOMAS T, MASCARENHAS R J, MARTIS P, et al. Multi-walled carbon nanotube modified carbon paste electrode as an electrochemical sensor for the determination of epinephrine in the presence of ascorbic acid and uric acid［J］. Materials Science and Engineering: C, 2013, 33(6): 3294-3302.

[19] SARASWAT S K, PANT K K. Synthesis of carbon nanotubes by thermo catalytic decomposition of methane over Cu and Zn promoted Ni/MCM-22 catalyst［J］. Journal of Environmental Chemical Engineering, 2013, 1(4): 746-754.

[20] GKIKAS M, DAS B P, TSIANOU M, et al. Surface initiated ring-opening polymerization of L-proline N-carboxy anhydride from single and multi walled carbon nanotubes［J］. European Polymer Journal, 2013, 49(10): 3095-3103.

[21] ROSADO G, VERDE Y, VALENZUELA-MUNIZ A M, et al. Catalytic activity of Pt-Ni nanoparticles supported on multi-walled carbon nanotubes for the oxygen reduction reaction［J］. International Journal of Hydrogen Energy, 2016, 41(48): 23260-23271.

[22] ANGULAKSHMI V S, RAJASEKAR K, SATHISKUMAR C, et al. Growth of vertically aligned carbon nanotubes on a silicon substrate by a spray pyrolysis method［J］. New Carbon Materials, 2013, 28(4): 284-287.

[23] WONG W Y, DAUD W R W, MOHAMAD A B, et al. Influence of nitrogen doping on carbon nanotubes towards the structure, composition and oxygen reduction reaction［J］. International Journal of Hydrogen Energy, 2013, 38(22): 9421-9430.

[24] DJOKIC V R, MARINKOVIC A D, ERSEN O, et al. The dependence of the photocatalytic activity of TiO2/ carbon nanotubes nanocomposites on the modification of the carbon nanotubes［J］. Ceramics International, 2014, 40(3): 4009-4018.

[25] WANG Feng-ge, LI Yu-kui, LU Wen-ke. Fabrication of groove shape cold cathode forenhancing field emission properties of carbon nanotube［J］. Acta Photonica Sinica, 2014, 43(4): 423001-423007.

[26] YOON D H, CHOI Y C. Improved field emission stability and uniformity of printed carbon nanotubes prepared using high energy-milled glass frit［J］. Current Applied Physics, 2013, 13(7): 1477-1481.

[27] LI Yu-kui, WANG Feng-ge, LIU Xing-hui,et al. Fabrication of integral type cold cathode with carbon nanotube for improving the electrical contact and adhesion performance［J］. Acta Photonica Sinica, 2013, 42(6): 637-644.

[28] BAEG K J, JEONG H J, JEONG S Y, et al. Enhanced ambipolar charge transport in staggered carbon nanotube field-effect transistors for printed complementary-like circuits［J］. Current Applied Physics, 2017, 17(4): 541-547.

[29] TUNCKOL M, HEMANDEZ E Z, SARASUA J R, et al. Polymerized ionic liquid functionalized multi-walled carbon nanotubes/ polyetherimide composites［J］. European Polymer Journal, 2013, 49(12): 3770-3777.

[30] AYKUT Y. Electrospun MgO-loaded carbon nanofibers: enhanced field electron emission from the fibers in vacuum［J］. Journal of Physics and Chemistry of Solids, 2013, 74(2): 328-337.