[1] Kusinski J, Kac S, Kopia A et al. Laser modification of the materials surface layer—A review paper[J]. Bulletin of the Polish Academy of Sciences, 60, 711-728(2012). http://www.degruyter.com/doi/10.2478/v10175-012-0083-9

[2] Zhao G L, Zou Y, Zou Z D et al. Research on in situ synthesised (Ti,V) C/Fe composite coating by laser cladding[J]. Materials Science and Technology, 31, 1329-1334(2014). http://www.tandfonline.com/doi/ref/10.1179/1743284714Y.0000000695

[3] Duan X X, Gao S Y, Gu Y F et al. Study on reinforcement mechanism and frictional wear properties of 316L-SiC mixed layer deposited by laser cladding[J]. Chinese Journal of Lasers, 43, 0103004(2016).

[4] Lee Y S, Nordin M, Babu S S et al. Influence of fluid convection on weld pool formation in laser cladding[J]. Welding Journal, 93, 292-300(2014). http://www.researchgate.net/publication/268278864_Influence_of_Fluid_Convection_on_Weld_Pool_Formation_in_Laser_Cladding

[5] Xu Y L, Dong Z B, Wei Y H et al. Marangoni convection and weld shape variation in A-TIG welding process[J]. Theoretical and Applied Fracture Mechanics, 48, 178-186(2007). http://www.sciencedirect.com/science/article/pii/S0167844207000407

[6] Dai D H, Gu D D. Tailored reinforcement/matrix interface and thermodynamic mechanism during selective laser melting composites[J]. Materials Science and Technology, 32, 617-628(2016). http://www.tandfonline.com/doi/full/10.1179/1743284715Y.0000000012

[7] Yu J J, Ruan D F, Li Y R et al. Experimental study on thermocapillary convection of binary mixture in a shallow annular pool with radial temperature gradient[J]. Experimental Thermal and Fluid Science, 61, 79-86(2015). http://www.sciencedirect.com/science/article/pii/S089417771400257X

[8] He X L, Song L J, Yu G et al. Solute transport and composition profile during direct metal deposition with coaxial powder injection[J]. Applied Surface Science, 258, 898-907(2011). http://www.sciencedirect.com/science/article/pii/S0169433211014036

[9] Peng J, Wang X X, Li G et al. Effect of laser welding with filler wire on molten pool dynamic behavior and weld formation[J]. Chinese Journal of Lasers, 44, 1102004(2017).

[10] Gan Z T, Liu H, Li S X et al. Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron[J]. International Journal of Heat and Mass Transfer, 111, 709-722(2017). http://www.researchgate.net/publication/316219721_Modeling_of_thermal_behavior_and_mass_transport_in_multi-layer_laser_additive_manufacturing_of_Ni-based_alloy_on_cast_iron

[11] Sahoo P, Debroy T, Mcnallan M J. Surface-tension of binary metal-surface-active solute systems under conditions relevant to welding metallurgy[J]. Metallurgical Transactions B, 19, 483-491(1988). http://link.springer.com/article/10.1007/BF02657748

[12] Lu S P, Fujii H, Nogi K. Sensitivity of Marangoni convection and weld shape variations to welding parameters in O2-Ar shielded GTA welding[J]. Scripta Materialia, 51, 271-277(2004). http://www.sciencedirect.com/science/article/pii/S135964620400140X

[13] Mills K C, Keene B J, Brooks R F et al. Marangoni effects in welding[J]. Philosophical Transactions of the Royal Society A, 356, 911-925(1998).

[14] Lienert T J, Burgardt P, Harada K L et al. Weld bead center line shift during laser welding of austenitic stainless steels with different sulfur content[J]. Scripta Materialia, 71, 37-40(2014). http://www.sciencedirect.com/science/article/pii/S1359646213004958

[15] Zhang S, Wu C L, Yi J Z et al. Synthesis and characterization of FeCoCrAlCu high-entropy alloy coating by laser surface alloying[J]. Surface & Coatings Technology, 262, 64-69(2015). http://www.sciencedirect.com/science/article/pii/S0257897214011451

[16] Gan Z T, Yu G, He X L et al. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Co-base alloy on steel[J]. International Journal of Heat and Mass Transfer, 104, 28-38(2017). http://www.sciencedirect.com/science/article/pii/S0017931016310377

[17] Kumar A, Roy S. Effect of three-dimensional melt pool convection on process characteristics during laser cladding[J]. Computational Materials Science, 46, 495-506(2009). http://www.sciencedirect.com/science/article/pii/S0927025609001608

[18] Abderrazak K, Bannour S, Mhiri H et al. Numerical and experimental study of molten pool formation during continuous laser welding of AZ91 magnesium alloy[J]. Computational Materials Science, 44, 858-866(2009). http://www.sciencedirect.com/science/article/pii/S0927025608002802

[19] Xia S Q, He J J, Wang W et al. Simulation of three-dimensional transient behavior of molten pool in laser deep penetration welding[J]. Chinese Journal of Lasers, 43, 1102004(2016).

[20] Nogi K, Ogino K, Mclean A et al. The temperature-coefficient of the surface-tension of pure liquid-metals[J]. Metallurgical Transactions B, 17, 163-170(1986). http://link.springer.com/article/10.1007/BF02670829

[21] Gan Z T, Yu G, He X L et al. Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing[J]. International Communications in Heat and Mass Transfer, 86, 206-214(2017). http://www.sciencedirect.com/science/article/pii/S0735193317301409