Polylactic acid (PLA) plastic waste has significant potential for methane production in anaerobic digestion, but its slow degradation rate hinders efficient fermentation. Pre-treatment of PLA plastic waste can enhance anaerobic fermentation efficiency, promoting resource utilization. PLA plastic cup sample was pre-treated by irradiation with ⁶⁰Co-γ ray to study the changes of PLA molecular structure and soluble substance content under the irradiation with absorbed doses of 0, 20, 40 and 60 kGy. And the effect of ionizing irradiation on the anaerobic fermentation performance of PLA samples was investigated by the proteolytic enzyme enzymatic digestion experiments and the changes of anaerobic fermentation gas production. The results showed that the lactic acid content in the supernatant of PLA samples irradiated by ⁶⁰Co-γ ray increased slightly with the increase of absorbed dose in the range of 0~60 kGy. The molecular structure of the samples did not change significantly, but their crystallinity and molecular weight decreased significantly. The lactate concentration and mass loss of the irradiated samples increased significantly during the enzymatic digestion process compared to the unirradiated samples. Specifically, The PLA sample with an absorbed dose of 60 kGy reached its maximum lactate concentration on the 4th day, which was 17.4% higher than that of non irradiated samples. The mass loss increased over time, which was 68.7% higher than that of non irradiated samples on the 7th day. The irradiated samples took significantly less time to reach gas production equilibrium in anaerobic fermentation, and the total gas production increased by 3.0%. The results indicate that γ-ray irradiation has potential application as a pretreatment technology for PLA plastics, and this study can provide a theoretical reference for the resourceful disposal of PLA plastics.