[1] FERNIE J A, DREW R, KNOWLES K M. Joining of engineering ceramics［J］. Int Mater Rev, 2009, 54(5): 283-331.

[2] CHAUMAT G, DREVET B, VERNIER L. Reactive brazing study of a silicon nitride to metal joining［J］. J Eur Ceram Soc, 1997, 17(15/16): 1925-1927.

[5] LIU G M, ZOU G S, WU A P, et al. Improvements of the Si3N4 brazed joints with intermetallics［J］. Mater Sci Eng A, 2006, A415(1/2): 213-218.

[7] HE Y M, ZHANG J, SUN Y, et al. Microstructure and mechanical properties of the Si3N4/42CrMo steel joints brazed with Ag-Cu-Ti+Mo composite filler［J］. J Eur Ceram Soc, 2010, 30(15): 3245-3251.

[11] WANG T, IVAS T, LEE W, et al. Relief of the residual stresses in Si3N4/Invar joints by multi-layered braze structure-experiments and simulation［J］. Ceram Int, 2016, 42(6): 7080-7087.

[14] NAEBE M, SHIRVANIMOGHADDAM K. Functionally graded materials: A review of fabrication and properties［J］. Appl Mater Today. 2016, 5: 223-245.

[15] ZHAO X, LIEW K M. Free vibration analysis of functionally graded conical shell panels by a meshless method［J］. Compos Struct, 2011, 93(2): 649-664.

[16] AGRAWAL P, CONLON K, BOWMAN K J, et al. Thermal residual stresses in co-continuous composites［J］. Acta Mater, 2003, 51(4): 1143-1156.

[17] TENG L D, LI W C. Residual stress analysis of Ti-ZrO2 thermal barrier graded materials［J］. Mater Des, 2002, 23(7): 627-632.

[18] MIR A H, AHMAD S N. A study on fabrication of silicon nitride-based advanced ceramic composite materials via spark plasma sintering［J］. J Mater Appl, 2021, 235(8): 1739-1756.

[23] LIU W, TONG W, HE R, et al. Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate［J］. Ceram Int, 2016, 42(16): 18641-18647.

[24] PAN Y, WANG P, ZHANG C. Structure, mechanical, electronic and thermodynamic properties of Mo5Si3 from first-principles calculations［J］. Ceram Int, 2018, 44(11): 12357-12362.

[25] IIZUKA T, KITA H. Oxidation behavior and effect of oxidation on mechanical properties of Mo5Si3 particle-reinforced Si3N4 composites［J］. Mater Sci Eng-A, 2004, 374(1/2): 115-121.

[26] CHOE H, HSIEH T, WOLFENSTINE J. The effect of powder processing on the coefficient of thermal expansion of MoSi2-Si3N4 composites［J］. Mater Sci Eng A, 1997, 237(2): 250-255.

[27] YOON J, LEE J, LEE K, et al. Microstructure and growth kinetics of the Mo5Si3 and Mo3Si layers in MoSi2/Mo diffusion couple［J］. Intermetallics, 2003, 11(7): 687-696.

[28] MISHRA S S, CHAIRA D, KARAK S K. Effect of Y2O3 and Al2O3 sintering additives during fabrication of Si3N4-Mo-Si cermet by conventional pressure-less sintering［J］. Ceram Int, 2019, 45(16): 20555-20565.

[32] CHEN F, JIA M Y, SHE Y L, et al. Mechanical behavior of AlN/Mo functionally graded materials with various compositional structures［J］. J Alloy Compd. 2020, 816: 152512.