• Journal of the Chinese Ceramic Society
  • Vol. 51, Issue 5, 1210 (2023)
QING Longbang1,*, BI Mengdi1, MU Ru1, and XING Peng2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less
    DOI: Cite this Article
    QING Longbang, BI Mengdi, MU Ru, XING Peng. Preparation and Mechanical Properties of 2D - Aligned Steel Fiber Reinforced Concrete[J]. Journal of the Chinese Ceramic Society, 2023, 51(5): 1210 Copy Citation Text show less
    References

    [1] TAN Y, LV L S, ZHANG D W, et al. Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure[J]. Eng Struct, 2022, 269: 114758.

    [2] CUI H Z, LI Y H, BAO X H, et al. Thermal performance and parameter study of steel fiber-reinforced concrete segment lining in energy subway tunnels[J]. Tun Unde Spa Tech, 2022, 128: 104647.

    [3] SHIN H O, YANG J M, YOON Y S, et al. Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers[J]. Cem Concr Compos, 2016, 74: 39-53.

    [4] FOGLAR M, HAJEK R, FLADR J, et al. Full-scale experimental testing of the blast resistance of HPFRC and UHPFRC bridge decks[J]. Constr Build Mater, 2017, 145: 588-601.

    [5] MOHAMED N, SOLIMAN A M, NEHDI M L. Mechanical performance of full-scale precast steel fibre-reinforced concrete pipes[J]. Eng Struct, 2015, 84: 287-299.

    [7] MU R, XING P, YU J C, et al. Investigation on reinforcement of aligned steel fiber on flexural behavior of cement-based composites using acoustic emission signal analysis[J]. Constr Build Mater, 2019, 201: 42-50.

    [8] MILLER A I, BJRKLUND F R. Method of reinforcing concrete with fibers[P]. US Patent, 4062913. 1977-12-13.

    [9] PHILIP L R, KURT H W. Aligned Steel Fibers in Concrete Poles[J]. Concr Int, 1986, 8(12): 22-27.

    [10] MU R, LI H, QING L B, et al. Aligning steel fibers in cement mortar using electro-magnetic field[J]. Constr Build Mater, 2017, 131: 309-316.

    [14] MU R, DIAO C R, LIU H Q, et al. Design, preparation and mechanical properties of full-field aligned steel fiber reinforced cementitious composite[J]. Constr Build Mater, 2021, 272: 121631.

    [15] MU R, XUE Y, QING L B, et al. Preparation and mechanical performance of annularly aligned steel fiber reinforced cement-based composite pipes[J]. Constr Build Mater, 2019, 211: 167-173.

    [16] MU R, DONG R X, LIU H Q, et al. Preparation of aligned steel-fiber-reinforced concrete using a magnetic field created by the assembly of magnetic pieces[J]. Crystals, 2021, 11(7): 837-850.

    [17] RAJU R A, LIM S, AKIYAMA M, et al. Effects of concrete flow on the distribution and orientation of fibers and flexural behavior of steel fiber-reinforced self-compacting concrete beams[J]. Constr Build Mater, 2020, 262: 119963.

    [18] BOULEKBACHE B, HAMRAT M, CHEMROUK M, et al. Flowability of fibre-reinforced concrete and its effect on the mechanical properties of the material[J]. Constr Build Mater, 2010, 24(9): 1664-1671.

    [19] ARUNOTHAYAN A R, NEMATOLLAHI B, RANADE R, et al. Fiber orientation effects on ultra-high performance concrete formed by 3D printing[J]. Cem Concr Res, 2021, 143: 106384.

    [20] SINGH A, LIU Q, XIAO J Z, et al. Mechanical and macrostructural properties of 3D printed concrete dosed with steel fibers under different loading direction[J]. Constr Build Mater, 2022, 323: 126616.

    [21] BOS F P, BOSCO E, SALET T M. Ductility of 3D printed concrete reinforced with short straight steel fibers[J]. Virtual Phys Prototyping, 2018, 14(2): 160-174.

    [22] ZHOU J H, LAI J Z, DU L Y, et al. Effect of directionally distributed steel fiber on static and dynamic properties of 3D printed cementitious composite[J]. Constr Build Mater, 2022, 318: 125948.

    [23] PHAM L, TRAN P, SANJAYAN J. Steel fibres reinforced 3D printed concrete: Influence of fibre sizes on mechanical performance[J]. Constr Build Mater, 2020, 250: 118785.

    [24] AHMAD I, QING L B, KHAN S, et al. Experimental investigations on fracture parameters of random and aligned steel fiber reinforced cementitious composites[J]. Constr Build Mater, 2021, 284: 122680.

    [25] QING L B, YU K L, MU R, et al. Uniaxial tensile behavior of aligned steel fibre reinforced cementitious composites[J]. Mater Struct, 2019, 52(4): 70-81.

    [26] HUANG H H, GAO X J, TENG L. Fiber alignment and its effect on mechanical properties of UHPC: An overview[J]. Constr Build Mater, 2021, 296: 123741.

    [28] ALBERTI M G, ENFEDAQUE A, GLVEZ J C. On the prediction of the orientation factor and fibre distribution of steel and macro-synthetic fibres for fibre-reinforced concrete[J]. Cem Concr Compos, 2017, 77: 29-48.

    [29] LEE C, KIM H. Orientation factor and number of fibers at failure plane in ring-type steel fiber reinforced concrete[J]. Cem Concr Res, 2010, 40(5): 810-819.

    [30] PARVIZ S, CHA D L. Distribution and orientation of fibers in steel fiber reinforced concrete[J]. ACI Mater J, 1990, 87(5): 433-439.

    [31] JAMES P R, JAMES A M. Tensile strength of concrete affected by uniformly distributed and closely spaced short lengths of wire reinforcement[J]. ACI J Pro, 1964, 61(6): 657-672.

    [32] LARANJEIRA F, AGUADO A, MOLINS C, et al. Framework to predict the orientation of fibers in FRC: A novel philosophy[J]. Cem Concr Res, 2012, 42(6): 752-768.

    [33] DUPONT D, VANDEWALLE L. Distribution of steel fibres in rectangular sections[J]. Cem Concr Compos, 2005, 27(3): 391-398.

    [34] RAO C K. Effectiveness of random fibres in composites[J]. Cem Concr Res, 1979, 9(6): 685-693.

    [36] WU Z M, KHAYAT K H, SHI C J. Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content[J]. Cem Concr Res, 2019, 123: 105786.

    [37] MORN A, FERRNDEZ D, SAIZ P, et al. New system for vibrating and orientation of steel fibers in masonry mortars[J]. J Build Eng, 2021, 43: 102827.

    [38] SOULIOTI D, BARKOULA N M, PAIPETIS A, et al. Acoustic emission behavior of steel fibre reinforced concrete under bending[J]. Constr Build Mater, 2009, 23(12): 3532-3536.

    [39] BARNETT S J, LATASTE J F, PARRY T, et al. Assessment of fibre orientation in ultra high performance fibre reinforced concrete and its effect on flexural strength[J]. Mater Struct, 2010, 43(7): 1009-1023.

    QING Longbang, BI Mengdi, MU Ru, XING Peng. Preparation and Mechanical Properties of 2D - Aligned Steel Fiber Reinforced Concrete[J]. Journal of the Chinese Ceramic Society, 2023, 51(5): 1210
    Download Citation