[2] Yang S, Homa D, Heyl H, et al. Application of sapphire-fiber-Bragg-grating-based multi-point temperature sensor in boilers at a commercial power plant[J]. Sensors, 2019, 19(14): 3211.

[3] Ma W, Jiang Y, Gao H. Miniature all-fiber extrinsic Fabry-Pérot interferometric sensor for high-pressure sensing under high-temperature conditions[J]. Measurement Science and Technology, 2019, 30(2): 025104.

[5] Cui Z, Li X, Chen G, et al. Thin-film temperature sensor made from particle-filled polymer-derived ceramics pyrolyzed in vacuum[J]. J. of the European Ceramic Society, 2022, 42(6): 2735-2742.

[6] Guo S, Eriksen H, Childress K, et al. High temperature smart-cut SOI pressure sensor[J]. Sensors and Actuators A: Physical, 2009, 154(2): 255-260.

[12] Cui Y, Jiang Y, Liu T, et al. A dual-cavity Fabry-Pérot interferometric fiber-optic sensor for the simultaneous measurement of high-temperature and high-gas-pressure[J]. IEEE Access, 2020, 8: 80582-80587.

[13] Wang A, Gollapudi S, Murphy K A, et al. Sapphire-fiber-based intrinsic Fabry-Perot interferometer[J]. Opt. Lett., 1992, 17(14): 1021-1023.

[14] Xiao H, Deng J, Pickrell G, et al. Single-crystal sapphire fiber-based strain sensor for high-temperature applications[J]. J. of Lightwave Technol., 2003, 21(10): 2276.

[15] Wang J, Dong B, Lally E, et al. Multiplexed high temperature sensing with sapphire fiber air gap-based extrinsic Fabry-Perot interferometers[J]. Opt. Lett., 2010, 35(5): 619-621.

[16] Zhu Y, Huang Z, Shen F, et al. Sapphire-fiber-based white-light interferometric sensor for high-temperature measurements[J]. Opt. Lett., 2005, 30(7): 711-713.

[17] Zhu Y, Wang A. Surface-mount sapphire interferometric temperature sensor[J]. Appl. Opt., 2006, 45(24): 6071-6076.

[18] Yu X, Wang S, Jiang J, et al. Self-filtering high-resolution dual-sapphire-fiber-based high-temperature sensor[J]. J. of Lightwave Technol., 2019, 37(4): 1408-1414.

[19] Wang B, Niu Y, Zheng S, et al. A high temperature sensor based on sapphire fiber Fabry-Perot interferometer[J]. IEEE Photon. Technol. Lett., 2019, 32(2): 89-92.

[20] Wang J, Lally E M, Dong B, et al. Fabrication of a miniaturized thin-film temperature sensor on a sapphire fiber tip[J]. IEEE Sensors J., 2011, 11(12): 3406-3408.

[21] Wang J, Lally E M, Wang X, et al. ZrO2 thin-film-based sapphire fiber temperature sensor[J]. Appl. Opt., 2012, 51(12): 2129-2134.

[22] Sugiyama A, Fukuyama H, Sasuga T, et al. Direct bonding of Ti: sapphire laser crystals[J]. Appl. Opt., 1998, 37(12): 2407-2410.

[23] Yi J, Lally E, Wang A, et al. Demonstration of an all-sapphire Fabry-Pérot cavity for pressure sensing[J]. IEEE Photon. Technol. Lett., 2010, 23(1): 9-11.

[24] Yi J. Sapphire Fabry-Pérot pressure sensor at high temperature[J]. IEEE Sensors J., 2020, 21(2): 1596-1602.

[25] Mills D A, Alexander D, Subhash G, et al. Development of a sapphire optical pressure sensor for high-temperature applications[J]. Proc. SPIE, 2014, 9113: 107-121.

[26] Pechstedt R D. Fibre optic pressure and temperature sensor for applications in harsh environments[J]. Proc. SPIE, 2013, 8794: 15-18.

[27] Li W, Liang T, Chen Y, et al. Interface characteristics of sapphire direct bonding for high-temperature applications[J]. Sensors, 2017, 17(9): 2080.

[28] Li W, Liang T, Jia P, et al. Fiber-optic Fabry-Perot pressure sensor based on sapphire direct bonding for high-temperature applications[J]. Appl. Opt., 2019, 58(7): 1662-1666.

[29] Wang Z, Chen J, Wei H, et al. Sapphire Fabry-Perot interferometer for high-temperature pressure sensing[J]. Appl. Opt., 2020, 59(17): 5189-5196.

[30] Shao Z, Wu Y, Wang S, et al. All-sapphire-based fiber-optic pressure sensor for high-temperature applications based on wet etching[J]. Opt. Express, 2021, 29(3): 4139-4146.

[31] Shao Z, Wu Y, Sun Z, et al. Excellent repeatability, all-sapphire Fabry-Perot optical pressure sensor based on wet etching and direct bonding for harsh environment applications[J]. Opt. Express, 2021, 29(13): 19831-19838.

[32] Shao Z, Wu Y, Wang S, et al. All-sapphire fiber-optic pressure sensors for extreme harsh environments[J]. Opt. Express, 2022, 30(3): 3665-3674.

[33] Feng X, Jiang Y, Xie S, et al. Higher-order mode suppression technique for multimode sapphire fiber external Fabry-Perot interferometers[J]. Opt. Express, 2022, 0(4): 4759-4767.

[34] Feng X, Jiang Y, Xie S, et al. Signal pick-up technique for sapphire fiber external Fabry-Perot interferometer using tapered multimode fibers[J]. J. of Lightwave Technol., 2022, 40(12): 3992-3996.

[35] Cui Y, Jiang Y, Xie S, et al. Measurement of sapphire wafer thermo-optic coefficient using high-temperature optical fiber sensors[J]. IEEE Sensors J., 2021, 22(3): 2244-2249.

[36] Tapping J, Reilly M L. Index of refraction of sapphire between 24 and 1060℃ for wavelengths of 633 and 799nm[J]. J. Opt. Soc. Amer. A, 1986, 3(5): 610-616.

[37] Yang D, Thomas M E, Tropf W J, et al. Infrared refractive index measurements using a new method[J]. Proc. SPIE, 2000, 4103: 42-52.

[38] Tropf W J, Thomas M E, Harris T J. Properties of crystals and glasses[Z]. Handbook of Optics, 1995, 2: 33.61.

[39] Yang D, Thomas M E, Tropf W J. Infrared refractive index of sapphire as a function of temperature[J]. Proc. SPIE, 1999, 3705: 60-69.

[40] Vodenitcharova T, Zhang L, Zarudi I, et al. The effect of thermal shocks on the stresses in a sapphire wafer[J]. IEEE Trans. on Semiconductor Manufacturing, 2006, 19(4): 449-454.

[41] Cui Y, Jiang Y, Zhang Y, et al. An all-sapphire fibre temperature sensor for high-temperature measurement[J]. Measurement Science and Technol., 2022, 33(10): 105115.

[42] Cui Y, Jiang Y, Zhang Y, et al. Sapphire optical fiber high-temperature vibration sensor[J]. Opt. Express, 2022, 30(2): 1056-1065.

[43] Feng X, Jiang Y, Gao H, et al. Diaphragm-free gas pressure sensor based on all-sapphire fiber Fabry-Perot interferometers[J]. Appl. Opt., 2022, 61(22): 6584-6589.