[1] LIU ZH Y, LI L X, ZENG XU F, et al.. Fabrication of large aspheric mirror using multi-mode polishing based on error separation ［J］. Opt.Precision Eng., 2017, 25(4): 281-287. (in Chinese)

[2] WANG X Y. Development and prospect of space optical technology ［J］. Spacecraft Recovery & Remote Sensing, 2018, 39(4): 79-86. (in Chinese)

[3] GUO J, ZHU L, ZHAO J, et al.. Design and optimize of high tolerance support structure for large aperture space mirror ［J］. Opt.Precision Eng., 2019, 27(5): 1138-1145. (in Chinese)

[4] ZHANG L, YE L, ZHANG J P, et al..Gravity and support error of separation of 1.2 m lightweight space mirror ［J］.Acta Photonica Sinica, 2018, 47(7): 0722002-1-0722002-6. (in Chinese)

[5] SONG W H, WU F, HOU X. Study on the absolute testing of rotationally asymmetric surface deviation with the method of single rotation ［J］. Acta Optica Sinca, 2012, 32(8): 0812006-1-0812006-6. (in Chinese)

[6] CHRIS J E, ROBERT N K. Test optics error removal ［J］. Appl.Opt., 1996, 35(7) : 1015-1021.

[7] KLAUSR R F. Absolute interferometric testing based on reconstruction of rotational shear ［J］. Appl.Opt., 2001, 40(10): 1637-1648.

[8] MARUIZIO V, GIUSEPPE M. Iterative algorithm for three flat tests ［J］. Opt.Express, 2007, 15(11): 6809-6816.

[9] PARKS P E. Removal of test optics errors ［J］.SPIE, 1978, 153: 56-63.

[10] WANG Y, LI L, GU ZH Y, et al.. Image quality checkout technique for optical camera of GF-4 satellite ［J］.Spacecraft Recovery & Remote Sensing, 2016, 37(4): 80-86. (in Chinese)

[11] YANG L W, LI ZH L, XUE D L, et al.. Extracting zero-gravity surface figure of mirror by orientation reversal ［J］.Chinese Optics, 2016, 9(5): 606-612. (in Chinese)

[12] ZHANG Y W, SU D Q, SUI Y X, et al.. Absolute testing of rotationally asymmetric surface deviation with the method of rotation-averaging and compensation ［J］. Chinese Journal of Lasers, 2014, 41(7): 0708007-1-0708007-6.(in Chinese)

[13] HAN D S, HE X, WEI ZH H, et.al.. Error correction of interferometer detection with high-accuracy rotation method ［J］. Opt.Precision Eng., 2015, 23(5): 1297-1303. (in Chinese)