[1] Zou Q Q, Gong H Y, Huang J L et al. Research status and development of laser welding technology[J]. Hot Working Technology, 45, 20-23(2016).
[2] Zhang Y, Li F Z, Liang Z C et al. Correlation analysis of penetration based on keyhole and plasma plume in laser welding[J]. Journal of Materials Processing Technology, 256, 1-12(2018).
[3] Konuk A R, Aarts R G K M, Veld A J H I et al. Process control of stainless steel laser welding using an optical spectroscopic sensor[J]. Physics Procedia, 12, 744-751(2011).
[4] Yusof M F M, Ishak M, Ghazali M F. Feasibility of using acoustic method in monitoring the penetration status during the Pulse Mode Laser Welding process[J]. IOP Conference Series: Materials Science and Engineering, 238, 012006(2017).
[5] Yusof M F M, Ishak M, Ghazali M F. Classification of weld penetration condition through synchrosqueezed-wavelet analysis of sound signal acquired from pulse mode laser welding process[J]. Journal of Materials Processing Technology, 279, 116559(2020).
[6] Luo Y, Zhu L, Han J T et al. Study on the acoustic emission effect of plasma plume in pulsed laser welding[J]. Mechanical Systems and Signal Processing, 124, 715-723(2019).
[7] Han X, Zhao Y, Zou J L et al. Analysis of plume formation reasons in laser deep penetration welding based on visual observation[J]. Chinese Journal of Lasers, 47, 0602004(2020).
[8] Sibillano T, Ancona A, Berardi V et al. Optical detection of conduction/keyhole mode transition in laser welding[J]. Journal of Materials Processing Technology, 191, 364-367(2007).
[9] Lu W, Ma X Y, Duan A Q et al. Weld formation and stability analysis of fiber laser beam welded BTi6431S titanium alloy[J]. Laser & Optoelectronics Progress, 57, 131405(2020).
[10] Zhang Y X, You D Y, Gao X D et al. Welding defects detection based on deep learning with multiple optical sensors during disk laser welding of thick plates[J]. Journal of Manufacturing Systems, 51, 87-94(2019).
[11] Zhou J, Shao C D, Cui H C et al. Plasma coupling behavior of laser-arc hybrid welding in groove[J]. Chinese Journal of Lasers, 49, 0202006(2022).
[12] Cai S, Chen G Y, Zhou C et al. Research of plasma physical model for single pulsed laser ablation of bronze-bond grinding wheel[J]. Acta Optica Sinica, 37, 0414001(2017).
[13] Zhao S B, Yang L J, Liu T et al. Analysis of plasma oscillations by electrical detection in Nd: YAG laser welding[J]. Journal of Materials Processing Technology, 249, 479-489(2017).
[14] Xu S, Yang L J, Xu S F et al. Relation between plasma electrical signal oscillation and weld depth in laser deep penetration welding[J]. Chinese Journal of Lasers, 47, 0102006(2020).
[15] Cherrington B E. The use of electrostatic probes for plasma diagnostics: a review[J]. Plasma Chemistry and Plasma Processing, 2, 113-140(1982).
[16] Zhao S B, Yang L J, Huang Y M et al. A study on welding mode transition by electrical detection of laser-induced plasma at varying energy levels[J]. The International Journal of Advanced Manufacturing Technology, 104, 893-906(2019).
[17] Zhao S B, Yang L J, Liu T et al. Electrical signal characteristics of plasma in YAG laser welding of A304 stainless steels under different modes[J]. Chinese Journal of Lasers, 43, 1202005(2016).
[18] Kroos J, Gratzke U, Simon G. Towards a self-consistent model of the keyhole in penetration laser beam welding[J]. Journal of Physics D: Applied Physics, 26, 474-480(1993).
[19] Klein T, Vicanek M, Simon G. Forced oscillations of the keyhole in penetration laser beam welding[J]. Journal of Physics D: Applied Physics, 29, 322-332(1996).