[1] Shi Zhaohui, Fan Zhongwei, Zhang Ying et al.. High efficiency and high power all-solid-state ultraviolet laser [J]. Chinese J. Lasers, 2007, 34(1):29～32

[2] Lu Honggang, Jiang Yanyi, Bi Zhiyi. Measurement of reflectivity of optical mirrors using laser phase modulation and fineness of Fabry-Perot cavity [J]. Chinese J. Lasers, 2006, 33(12):1675～1679

[3] Wang Chunmei, Li Jiong, Gong Tianlin et al.. Determination of the absolute absorption cross section of oxygen forbidden transition by cavity ring down spectroscopy [J]. Acta Optica Sinica, 2007, 27(11):2087～2090

[4] Wu Jianqiang, Tang Xiahui, Qin Yingxiong et al.. 90°conical reflector resonator for high power transverse flow CO2 laser [J]. Chinese J. Lasers, 2007, 34(5):628～632

[5] W. D. Sproul, D. J. Christie, D. C. Carter. Control of reactive sputtering processes [J]. Thin Solid Films, 2005, 491:1～17

[6] Mao Xinhui, Chen Guoping, Cai Bingchu. Advance in reactive magnetron sputteing [J]. Vacuum, 2001, 4:1～7

[7] Zheng Dingwei, Ni Sheng, Zhao Qiang et al.. Structure and optical properties of ZnO films DC reactively sputtered at different oxygen partial pressure [J]. Acta Optica Sinica, 2007, 27(4):739～743

[8] S. M. Rossnagel. Thin film deposition with physical vapor deposition and related technologies[J]. Journal of Vacuum Science and Technology A, 2003, 21(5):S74～S87

[9] Yan Hong, Zhao Futing. Advances in reactive magnetron sputtering (RMS) applied on optical coating [J]. Opt. Instrment, 2004, 26(2):109～114

[10] Fachun Lai, Ming Li, Haiqian Wang et al.. Substrate temperature effect on the refractive index and a two-step film method to detect small inhomogeneities in optical films [J]. Appl. Opt., 2005, 44(29):6181～6185

[11] Sun Fuge, Dai Dongxu, Xie Jinchun et al.. Accurate reflectivity measurement of high reflective mirrors via a cavity ring-down method [J]. Chinese J. Lasers, 1999, A26(1):35～38

[12] A. Yamamoto, Y. Abe, M. Kawamura et al.. Effects of oxygen gettering and target mode change in the formation process of reactively RF sputtered WOx thin films [J]. Vacuum, 2002, 66:269～273

[13] M. A. Lewis, D.A. Glocker, J. Jorne. Measurement of secondary electron emission in reactive sputtering of aluminum and titanium nitride [J]. Journal of Vacuum Science and Technology A, 1989, 7(3):1019～1024

[14] Fachun Lai, Yong Wang, Ming Li et al.. Determination of optical constants and inhomogeneity of optical films by two-step envelope method [J]. Thin Solid Film, 2007, 515:4763～4767

[15] Fachun Lai, Ming Li, Haiqian Wang et al.. Effect of oxygen flow rate on the properties of SiOx films deposited by reactive magnetron sputtering [J]. Chin. Opt. Lett., 2005, 3(8):490～493

[16] H. X. Liu , S. M. Xiong, L. H. Li et al.. Variation of the deposition rate during ion beam sputter deposition of optical thin films [J]. Thin Solid Films, 2005, 484:170～173

[17] H. J. Cho, M. J. Shin, J. C. Lee. Effects of substrate and deposition method onto the mirror scattering [J]. Appl. Opt., 2006, 45(7):1440～1446

[18] Hou Haihong, Fan Zhengxiu, Shao Jianda et al.. Scalar scattering theory of optical surface [J]. Laser & Optoelectronics Progress, 2005, 42(11):35～38

[19] G. Rempe, J. Thompson, H. J. Kimble. Measurement of ultralow losses in an optical interferometer [J]. Appl. Opt., 1992, 17(5):363～365