[1] WALLEVIK J E. Rheological properties of cement paste: thixotropic behavior and structural breakdown［J］. Cement and Concrete Research, 2009, 39(1): 14-29.

[2] ROUSSEL N, LEMATRE A, FLATT R J, et al. Steady state flow of cement suspensions: a micromechanical state of the art［J］. Cement and Concrete Research, 2010, 40(1): 77-84.

[3] ROUSSEL N, OVARLEZ G, GARRAULT S, et al. The origins of thixotropy of fresh cement pastes［J］. Cement and Concrete Research, 2012, 42(1): 148-157.

[4] MEWIS J, WAGNER N J. Thixotropy［J］. Advances in Colloid and Interface Science, 2009, 147/148: 214-227.

[5] MOSTAFA A M, YAHIA A. New approach to assess build-up of cement-based suspensions［J］. Cement and Concrete Research, 2016, 85: 174-182.

[6] KHAYAT K, OMRAN A. Field validation of SCC formwork pressure prediction models［J］. Concrete International, 2011: 33-39.

[7] JACQUET Y, PERROT A, PICANDET V. Assessment of asymmetrical rheological behavior of cementitious material for 3D printing application［J］. Cement and Concrete Research, 2021, 140: 106305.

[8] RANJBAR N, MEHRALI M, KUENZEL C, et al. Rheological characterization of 3D printable geopolymers［J］. Cement and Concrete Research, 2021, 147: 106498.

[9] ROUSSEL N. Rheological requirements for printable concretes［J］. Cement and Concrete Research, 2018, 112: 76-85.

[10] BUSWELL R A, LEAL DE SILVA W R, JONES S Z, et al. 3D printing using concrete extrusion: a roadmap for research［J］. Cement and Concrete Research, 2018, 112: 37-49.

[11] MARCHMENT T, SANJAYAN J. Mesh reinforcing method for 3D concrete printing［J］. Automation in Construction, 2020, 109: 102992.

[12] MARCHMENT T, SANJAYAN J, XIA M. Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification［J］. Materials & Design, 2019, 169: 107684.

[13] ZUO S H, XIAO J, ZHANG Q, et al. Effect of nano-SiO2 on rheological property of fresh cement pastes［J］. Bulletin of the Chinese Ceramic Society, 2019, 38(2): 317-322+338 (in Chinese).

[14] CHEN C C, ZHANG Q Q, YANG Y, et al. Time-dependent static and dynamic rheological behavior of cement past low water to cement ratio［J/OL］. Materials Reports: 1-8 ［2023-09-29］. http://kns.cnki.net/kcms/detail/50.1078.TB.20230630.1310.004.html (in Chinese).

[15] ZHANG C, DENG Z C, WANG Z B, et al. Effects of fibers on printing performance and mechanical properties of 3D printing concrete［J］. Bulletin of the Chinese Ceramic Society, 2021, 40(6): 1870-1878+1888 (in Chinese).

[16] MAHAUT F, CHATEAU X, COUSSOT P, et al. Yield stress and elastic modulus of suspensions of noncolloidal particles in yield stress fluids［J］. Journal of Rheology, 2008, 52(1): 287-313.

[17] PERROT A, LECOMPTE T, KHELIFI H, et al. Yield stress and bleeding of fresh cement pastes［J］. Cement and Concrete Research, 2012, 42(7): 937-944.

[18] YUAN Q, ZHOU D J, KHAYAT K H, et al. On the measurement of evolution of structural build-up of cement paste with time by static yield stress test vs. small amplitude oscillatory shear test［J］. Cement and Concrete Research, 2017, 99: 183-189.

[19] AHARI R S, ERDEM T K, RAMYAR K. Thixotropy and structural breakdown properties of self consolidating concrete containing various supplementary cementitious materials［J］. Cement and Concrete Composites, 2015, 59: 26-37.

[20] ASSAAD J, KHAYAT K H. Assessment of thixotropy of self-consolidating concrete and concrete-equivalent-mortar: effect of binder composition and content［J］. ACI Materials Journal, 2004, 101(5): 400-408.

[21] YUAN Q, ZHOU D J, LI B Y, et al. Effect of mineral admixtures on the structural build-up of cement paste［J］. Construction and Building Materials, 2018, 160: 117-126.

[22] HE Z, JIANG R, LI Y. Viscoelasticity characteristics of mortars in static and dynamic rheological test［J］. Journal of Hydraulic Engineering, 2018, 49(5): 561-569 (in Chinese).

[23] KWAN A K H, FUNG W W S, WONG H H C. Water film thickness, flowability and rheology of cement-sand mortar［J］. Advances in Cement Research, 2010, 22(1): 3-14.