[1] Kumar R. A review on RF micro-electro-mechanical-systems (MEMS) switch for radio frequency applications [J].Microsyst. Technol., 2021, 27(7): 2525-2542.
[2] Rebeiz G M, Muldavin J B. RF MEMS switches and switch circuits[J]. IEEE Microwave Mag., 2001, 2(4): 59-71.
[3] Bansal D, Bajpai A, Kumar P, et al. Design and fabrication of a reduced stiction radio frequency MEMS switch[J]. J. Micro/Nanolithogr. MEMS MOEMS, 2015, 14(3): 035002.
[4] Kundu A, Sethi S, Mondal N C, et al. Analysis and optimization of two movable plates RF MEMS switch for simultaneous improvement in actuation voltage and switching time[J]. Microelectron. J., 2010, 41(5): 257-265.
[5] Kim M W, Song Y H, Yang H H, et al. An ultra-low voltage MEMS switch using stiction-recovery actuation [J]. J.Micromech. Microeng., 2013, 23(4): 045022.
[6] Abdul Rahim F, Younis M I. Control of bouncing in MEMS switches using double electrodes[J]. Math. Probl. Eng.,2016: 3479752.
[7] Ke F, Miao J, Oberhammer J. A ruthenium-based multimetal-contact RF MEMS switch with a corrugated diaphragm[J]. J. Microelectromech. Syst., 2008, 17(6):1447-1459.
[8] Liu Y, Liu J, Yu B, et al. A compact single-cantilever multicontact RF-MEMS switch with enhanced reliability[J].IEEE Microwave Wireless Compon. Lett., 2018, 28(3): 191-193.
[9] Reddy B L, Shanmuganantham T. Design of novel capacitive RF MEMS shunt switch with aluminum nitride (AlN) dielectric[J]. Procedia Mater. Sci., 2014, 6: 692-700.
[10] Manivannan M, Daniel R J, Sumangala K. Low actuation voltage RF MEMS switch using varying section composite fixed-fixed beam[J]. Inter. J. of Microwave Science and Technol., 2014: 862649.
[11] Li M, Zhao J, You Z, et al. Design and fabrication of a low insertion loss capacitive RF MEMS switch with novel microstructures for actuation[J]. Solid-State Electron., 2017,127: 32-37.
