Comparative study on the performance of piezo-active 1–3-type composites with lead-free components

Ashura N. Isaeva; Vitaly Yu. Topolov

doi:10.1142/S2010135X21600031

[1] ErturkA. andInmanD. J.,Piezoelectric Energy Harvesting(Wiley,Chichester,2011).

[2] PriyaS. andInmanD. J.(eds.),Energy Harvesting Technologies(Springer,New York,2009).

[3] BowenC. R.,TopolovV. Yu. andKimH. A.,Modern Piezoelectric Energy-Harvesting Materials(Springer International Publ.Switzerland, Cham,2016).

[4] ShevtsovS. N.,SolovievA. N.,ParinovI. A.,CherpakovA. V. andChebanenkoV. A.,Piezoelectric Actuators and Generators for Energy Harvesting. Research and Development(Springer Nature,Cham,2018).

[5] HehnT. andManoliY.,CMOS Circuits for Piezoelectric Energy Harvesters. Efficient Power Extraction, Interface Modeling and Loss Analysis(Springer,Dordrecht, Heidelberg, New York, London,2015).

[6] BowenC. R.,TopolovV. Yu.,ZhangY. andPanichA. A.,1–3-type composites based on ferroelectrics: Electromechanical coupling, figures of merit, and piezotechnical energy-harvesting applications,Energy Technol.6,813(2018).

[7] WangR.-C.,LinY.-C.,ChenH.-C. andLinW.-Y.,Energy harvesting from g-C3N4 piezoelectric nanogenerators,Nano Energy83,105743(2020).

[8] SuH.,WangX.,LiC.,WangZ.,WuY.,ZhangJ.,ZhangY.,ZhaoC.,WuJ. andZhengH.,Enhanced energy harvesting ability of polydimethylsiloxane-BaTiO3-based flexible piezoelectric nanogenerator for tactile imitation application,Nano Energy83,105809(2020).

[9] SharmaM.,ChauhanA. andVaishR.,Energy harvesting using piezoelectric cementitious composites for water cleaning applications,Mater. Res. Bull.137,111205(2021).

[10] WseemA.,AliJoharM.,Afifi HassanM.,BagalI. V.,HaJ.-S.,LeeJ. K. andRyuaS.-W.,GaN/Al2O3 core-shell nanowire based flexible and stable piezoelectric energy harvester,J. Alloys Compd.860,158545(2021).

[11] GeS.,XiaY.,YangY.,ChenJ.,PengY.,XiaH.,WangX. andQianL.,A sensorless self-tuning resonance system for piezoelectric broadband vibration energy harvesting,IEEE Trans. Industr. Electronics68,2225–2235(2021).

[12] ZhouD.,LamK. H.,ChenY.,ZhangQ.,ChiuY. C.,LuoH.,DaiJ. andChanH. L. W.,Lead-free piezoelectric single crystal based 1–3 composites for ultrasonic transducer applications,Sens. A. Actuators A182,95(2012).

[13] RenK.,LiuY.,GengX.,HofmannH. F. andZhangQ. M.,Single crystal PMN–PT/epoxy 1–3 composite for energy-harvesting application,IEEE Trans. Ultrason., Ferroelectr., a. Freq. Control53,631(2006).

[14] ZengZ.,GaiL.,WangX.,LinD.,WangS.,LuoH. andWangD.,A plastic-composite-plastic structure high performance flexible energy harvester based on PIN-PMN-PT single crystal/epoxy 2–2 composite,Appl. Phys. Lett.110,103501(2017).

[15] TopolovV. Yu. andIsaevaA. N.,Hydrostatic piezoelectric parameters of lead-free 2–0–2 composites with two single-crystal components: Waterfall-like orientation dependences,J. Adv. Dielect.10,2050015(2020).

[16] NewnhamR. E.,SkinnerD. P. andCrossL. E.,Connectivity and piezoelectric – pyroelectric composites,Mater. Res. Bull.13,525(1978).

[17] TopolovV. Yu.,IsaevaA. N. andBisegnaP.,Novel lead-free composites with two porosity levels: Large piezoelectric anisotropy and high sensitivity,J. Phys. D: Appl. Phys.53,395303(2020).

[18] RoscowJ. I.,PearceH.,KhanbarehH.,Kar-NarayanS. andBowenC. R.,Modified energy harvesting figures of merit for stress- and strain-driven piezoelectric systems,Eur. Phys. J. Spec. Topics228,1537(2019).

[19] DunnM. L. andTayaM.,Electromechanical properties of porous piezoelectric ceramics,J. Am. Ceram. Soc.76,1697(1993).

[20] HuangJ. H. andYuS.,Electroelastic Eshelby tensors for an ellipsoidal piezoelectric inclusion,Compos. Eng.4,1169(1994).

[21] LevassortF.,LethiecqM.,CertonD. andPatatF.,A matrix method for modeling electroelastic moduli of 0–3 piezo-composites,IEEE Trans. Ultrason., Ferroelectr., a. Freq. Control44,445(1997).

[22] IkedaT.,Fundamentals of Piezoelectricity(Oxford University Press,Oxford,1990).

[23] DeutzD. B.,PascoeJ.-A.,SchelenB.,van der ZwaagS.,de LeeuwD. M. andGroenP.,Analysis and experimental validation of the figure of merit for piezoelectric energy harvesters,Mater. Horiz.5,444(2018).

[24] HuoX.,ZhangR.,ZhengL.,ZhangS.,WangR.,WangJ.,SangS.,YangB. andCaoW.,(K, Na, Li)(Nb, Ta)O3:Mn lead-free single crystal with high piezoelectric properties,J. Am. Ceram. Soc.98,1829(2015).

[25] GibianskyL. V. andTorquatoS.,On the use of homogenization theory to design optimal piezocomposites for hydrophone applications,J. Mech. Phys. Solids45,689(1997).

[26] KeQ.,LiewW.H.,TaoH.,WuJ., andYaoK.,KNNS-BNZH lead-free 1–3 piezoelectric composite for ultrasonic and photoacoustic imaging,IEEE Trans. Ultrason., Ferroelec., A Freq. Contr.66,1395(2019).

[27] StuberV. L.,DeutzD. B.,BennettJ.,CannelD.,de LeeuwD. M.,van der ZwaagS. andGroenP.,Flexible lead-free piezoelectric composite materials for energy harvesting applications,Energy Technol.7,177(2019).

[28] TopolovV. Yu. andIsaevaA. N.,Modified figures of merit of 1–3 composites based on ferroelectric crystals,Zhurnal Tekhn. Fiziki91,968(2021,in Russian).

[29] ZhangR.,JiangB. andCaoW.,Elastic, piezoelectric, and dielectric properties of multidomain 0.67Pb(Mg1/3Nb2/3)O3–0.33PbTiO3single crystals,J. Appl. Phys.90,3471(2001).