[1] Yu Zhenzhen, Hou Xia, Zhou Cuiyun. Progress and current state of space-borne laser altimetry[J].Laser & Optoelectronics Progress, 2013, 50(2): 020006(in Chinese).
[2] Schutz B E. GLASAltimeter Post-Launch Calibration/Validation Plan, version 1.0[M]. Center for Space Research, The University of Texas at Austin, 2001.
[3] Margruder LA.Pointing Angle and Timing Verification of the Geoscience Laser Altimeter using a Ground-Based Detection System[D]. Texas: Doctorial Dissertation of University of Texas at Austin, 2001.
[4] Cui Congcong, Wang Qimao, Tang Junwu,et al. Preliminary discussion about the method of HY-2 altimeter calibration[J]. Remote Sensing Information, 2012(1): 116-120(in Chinese).
[5] Wen Hanjiang, Cheng Pengfei. Introduction to principle of ICESAT/GLAS laser altimetry and itsapplications[J]. Science of Surveying and Mapping, 2005, 30(5): 33-35(in Chinese).
[6] Yao Pingping, Zhao Xin, Zhang Yi,et al. Measurement of flight time for satellite laser altimeter based on FPGA[J]. Infrared and Laser Engineering, 2008, 37(4): 679-682(in Chinese).
[7] Zhao Xin, Zhang Yi, Zhao Pingjian,et al. Influence of atmospheric transmission delay of satellite laser altimeter on ranging precision[J]. Infrared and Laser Engineering, 2011, 40(3): 438-442(in Chinese).
[8] Zhai Wanlin, Chen Chuntao, Yan Longhao,et al. Study on the technology of in-situ calibration and validation of satellite altimeter[J]. Journal of Ocean Technology, 2014, 30(6): 13-19(in Chinese).
[9] Yue Chunyu, He Hongyan, Bao Yunfei,et al. Study on error propagation of space-borne laser altimeter geometric positioning[J]. Spacecraft Recovery & Remote Sensing, 2014, 35(2): 81-86(in Chinese).
[10] Xilinx Inc.Xilinx Spartan 6 Series Handbook[M/OL]. 2006, http://www.xilinx.com.cn/.