[1] Zhang W K. Numerical simulation and defect mechanism analysis of die steel laser polishing process[D](2019).
[2] Yan F J. Research on electrochemical polishing test and performance of cardiovascular stent[D](2019).
[3] Jiang T, Liu J D, Pi J et al. Simulation and experimental study on the concave influence function in high efficiency bonnet polishing for large aperture optics[J]. The International Journal of Advanced Manufacturing Technology, 97, 2431-2437(2018).
[4] Pan R, Zhao W Y, Zhong B et al. Evaluation of removal characteristics of bonnet polishing tool using polishing forces collected online[J]. Journal of Manufacturing Processes, 47, 393-401(2019).
[5] Liu H B, Li J Y, Zhang H W et al. Numerical simulation analysis of micro-hole based on abrasive flow polishing[J]. Vibroengineering Procedia, 22, 149-153(2019).
[6] Deng T T, Xie F, Li J J et al. Effect of overlapped adjacent tracks on surface morphology in plasma beam polishing of austenitic stainless steel[J]. Applied Surface Science, 512, 145739(2020).
[7] Xu J, Guo B, Shan D B et al. Surface quality improvements of WC-Co micro-punch finished by ion beam irradiation for micro-punching process of metal foil[J]. Surface and Coatings Technology, 235, 803-810(2013).
[8] Xu J, Wang C, Guo B et al. Surface finish of micro punch with ion beam irradiation[J]. Transactions of Nonferrous Metals Society of China, 19, s526-s530(2009).
[9] Riemer O, Elsner-Dörge F. Investigation of material removal in vibration polishing of NiCo alloys with millimetre-sized tools[J]. The International Journal of Advanced Manufacturing Technology, 92, 3117-3122(2017).
[10] Chen B W, Sun S F, Wang X et al. Research progress of laser polishing technology for material surface[J]. China Surface Engineering, 34, 74-89(2021).
[11] Dai W, Zheng Z Z, Li J J et al. Research progress of laser polishing on the metal surface[J]. Laser＆Optoelectronics Progress, 52, 110001(2015).
[12] Lambarri J, Leunda J, Soriano C et al. Laser surface smoothing of nickel-based superalloys[J]. Physics Procedia, 41, 255-265(2013).
[13] Lamikiz A, Sánchez J A, López de Lacalle L N et al. Surface roughness improvement using laser-polishing techniques[J]. Materials Science Forum, 526, 217-222(2006).
[14] Lednev V N, Pershin S M, Ionin A A et al. Laser ablation of polished and nanostructured titanium surfaces by nanosecond laser pulses[J]. Spectrochimica Acta Part B: Atomic Spectroscopy, 88, 15-19(2013).
[16] Song Y, Wang H P, Wang Q et al. Research and application of laser fine surface processing technology: cleaning and polishing[J]. Aeronautical Manufacturing Technology, 61, 78-86(2018).
[17] Xia Z B, Fang F Z, Ahearne E et al. Advances in polishing of optical freeform surfaces: a review[J]. Journal of Materials Processing Technology, 286, 116828(2020).
[18] Bordatchev E V, Hafiz A M K, Tutunea-Fatan O R. Performance of laser polishing in finishing of metallic surfaces[J]. The International Journal of Advanced Manufacturing Technology, 73, 35-52(2014).
[19] Temmler A, Liu D, Luo J et al. Influence of pulse duration and pulse frequency on micro-roughness for laser micro polishing (LµP) of stainless steel AISI 410[J]. Applied Surface Science, 510, 145272(2020).
[20] Perry T L, Werschmoeller D, Duffie N A et al. Examination of selective pulsed laser micropolishing on microfabricated nickel samples using spatial frequency analysis[J]. Journal of Manufacturing Science and Engineering, 131, 021002(2009).
[21] Perry T L, Werschmoeller D, Li X et al. Pulsed laser polishing of micro-milled Ti6Al4V samples[J]. Journal of Manufacturing Processes, 11, 74-81(2009).
[22] Pfefferkorn F E, Duffie N A, Li X et al. Improving surface finish in pulsed laser micro polishing using thermocapillary flow[J]. CIRP Annals, 62, 203-206(2013).
[23] Pfefferkorn F E, Duffie N A, Morrow J D et al. Effect of beam diameter on pulsed laser polishing of S7 tool steel[J]. CIRP Annals, 63, 237-240(2014).
[24] Nüsser C, Wehrmann I, Willenborg E. Influence of intensity distribution and pulse duration on laser micro polishing[J]. Physics Procedia, 12, 462-471(2011).
[25] Nüsser C, Willenborg E. High-speed laser micro polishing of TiAl6V4[J]. Journal of Laser Applications, 34, 012025(2022).
[26] Liu E J, Chen X, Pan Z M et al. Enhanced corrosion performance of S136 steel after nanosecond pulsed laser polishing[J]. Journal of Materials Research and Technology, 20, 1328-1340(2022).
[27] Yao J H, Huang J B, Wang G H et al. Pulsed laser polishing mechanism on high roughness surface cut by wire electrical discharge machining[J]. Chinese Journal of Lasers, 48, 1402003(2021).
[28] Dai W, Li J J, Zhang W K et al. Evaluation of fluences and surface characteristics in laser polishing SKD 11 tool steel[J]. Journal of Materials Processing Technology, 273, 116241(2019).
[29] Ukar E, Lamikiz A, López De Lacalle L N et al. Laser polishing of tool steel with CO2 laser and high-power diode laser[J]. International Journal of Machine Tools and Manufacture, 50, 115-125(2010).
[30] Xu J L, Zou P, Wang W J et al. Study on the mechanism of surface topography evolution in melting and transition regimes of laser polishing[J]. Optics & Laser Technology, 139, 106947(2021).
[31] Zhou H, Zhou H M, Zhao Z Y et al. Numerical simulation and verification of laser-polishing free surface of S136D die steel[J]. Metals, 11, 400(2021).
[32] Zhou J, Liao C H, Shen H et al. Surface and property characterization of laser polished Ti6Al4V[J]. Surface and Coatings Technology, 380, 125016(2019).
[33] Ramos J A, Bourell D L, Beaman J J. Surface over-melt during laser polishing of indirect-SLS metal parts[J]. MRS Online Proceedings Library, 758, 191-199(2003).
[34] Temmler A, Cortina M, Ross I et al. Evolution of surface topography and microstructure in laser polishing of cold work steel 1.2379 (AISI D2) using quadratic, top-hat shaped intensity distributions[J]. Materials, 15, 769(2022).
[35] Krishnan A, Fang F Z. Review on mechanism and process of surface polishing using lasers[J]. Frontiers of Mechanical Engineering, 14, 299-319(2019).
[36] Shen H, Liao C H, Zhou J et al. Two-step laser based surface treatments of laser metal deposition manufactured Ti6Al4V components[J]. Journal of Manufacturing Processes, 64, 239-252(2021).
[37] Chen L, Yang Y Q. Mechanism and application of laser polishing[J]. Surface Technology, 32, 49-52(2003).
[38] Chen T, Wang W J, Tao T et al. Multi-scale micro-nano structures prepared by laser cleaning assisted laser ablation for broadband ultralow reflectivity silicon surfaces in ambient air[J]. Applied Surface Science, 509, 145182(2020).
[39] Jiang X W, Long X W, Tan Z Q. A review of material removal mechanism in ultra-precision polishing of optical glass[J]. Chinese Journal of Lasers, 48, 0401014(2021).
[40] Xu Y F, Shao J Z, Lin Y et al. Research progress in laser surface polishing of hard and brittle materials[J]. Laser＆Optoelectronics Progress, 59, 1300003(2022).
[41] Giorleo L, Ceretti E, Giardini C. Ti surface laser polishing: effect of laser path and assist gas[J]. Procedia CIRP, 33, 446-451(2015).
[42] Jang P R, Kim C G, Han G P et al. Influence of laser spot scanning speed on micro-polishing of metallic surface using UV nanosecond pulse laser[J]. The International Journal of Advanced Manufacturing Technology, 103, 423-431(2019).
[43] Pong-Ryol J, Tae-Sok J, Nam-Chol K et al. Laser micro-polishing for metallic surface using UV nano-second pulse laser and CW laser[J]. The International Journal of Advanced Manufacturing Technology, 85, 2367-2375(2016).
[44] Zhu P F. Study of ultrafast laser polishing technology[D](2014).
[45] Ozkan A M, Malshe A P, Brown W D. Sequential multiple-laser-assisted polishing of free-standing CVD diamond substrates[J]. Diamond and Related Materials, 6, 1789-1798(1997).
[46] Liu H G, Xie L R, Lin W X et al. Optical quality laser polishing of CVD diamond by UV pulsed laser irradiation[J]. Advanced Optical Materials, 9, 2100537(2021).
[47] Li Y H, Cheng X, Guan Y C. Ultrafine microstructure development in laser polishing of selective laser melted Ti alloy[J]. Journal of Materials Science & Technology, 83, 1-6(2021).
[48] Ma C P, Guan Y C, Zhou W. Laser polishing of additive manufactured Ti alloys[J]. Optics and Lasers in Engineering, 93, 171-177(2017).
[49] Qiu Y. Investigations on fiber laser polishing die steel[D](2015).
[50] Kumstel J, Kirsch B. Polishing titanium- and nickel-based alloys using cw-laser radiation[J]. Physics Procedia, 41, 362-371(2013).
[51] Kumstel J. Laser polishing of metallic freeform surfaces by using a dynamic laser beam preforming system[J]. Journal of Laser Applications, 33, 022020(2021).
[52] Annamaria G, Massimiliano B, Francesco V. Laser polishing: a review of a constantly growing technology in the surface finishing of components made by additive manufacturing[J]. The International Journal of Advanced Manufacturing Technology, 120, 1433-1472(2022).
[53] Basha S M, Bhuyan M, Basha M M et al. Laser polishing of 3D printed metallic components: a review on surface integrity[J]. Materials Today: Proceedings, 26, 2047-2054(2020).
[54] Lee S, Ahmadi Z, Pegues J W et al. Laser polishing for improving fatigue performance of additive manufactured Ti-6Al-4V parts[J]. Optics & Laser Technology, 134, 106639(2021).
[55] Obeidi M A, McCarthy E, O’Connell B et al. Laser polishing of additive manufactured 316L stainless steel synthesized by selective laser melting[J]. Materials, 12, 991(2019).
[56] Rosa B, Mognol P, Hascoët J Y. Laser polishing of additive laser manufacturing surfaces[J]. Journal of Laser Applications, 27, S29102(2015).
[57] Heidrich S, Willenborg E, Weingarten C et al. Laser polishing and laser form correction of fused silica optics[J]. Materialwissenschaft Und Werkstofftechnik, 46, 668-674(2015).
[58] Matthews M J, Yang S T, Shen N et al. Micro-shaping, polishing, and damage repair of fused silica surfaces using focused infrared laser beams[J]. Advanced Engineering Materials, 17, 247-252(2015).
[59] Zhao L J, Cheng J, Chen M J et al. Formation mechanism of a smooth, defect-free surface of fused silica optics using rapid CO2 laser polishing[J]. International Journal of Extreme Manufacturing, 1, 88-98(2019).
[60] Ren Y M, Zhang Z Y. Surface of nanosecond laser polished single-crystal silicon improved by two-step laser irradiation[J]. Acta Optica Sinica, 42, 0714004(2022).
[61] Ji G S, Zhang Y K. Laser polishing of chemically vapor-deposited diamond films[J]. Laser Technology, 27, 106-109(2003).
[62] Guo X Y. Study on short wavelength laser polishing of sapphire[D](2007).
[63] Hua M, Sedao, Shao T M et al. Surface transformation of DF-2 steel after continuous mode laser irradiation[J]. Journal of Materials Processing Technology, 192/193, 89-96(2007).
[64] SeDao M, Hua M, Shao T M et al. Surface modification of DF-2 tool steel under the scan of a YAG laser in continuously moving mode[J]. Journal of Materials Processing Technology, 209, 4689-4697(2009).
[65] Shao T M, Hua M, Tam H Y et al. An approach to modelling of laser polishing of metals[J]. Surface and Coatings Technology, 197, 77-84(2005).
[66] Bai H, Wang Y Q, Dong X et al. Mechanism and size characteristics of micro crack on polished Ti6Al4V[J]. Journal of Xi’an Jiaotong University, 49, 117-123(2015).
[67] Liu B W, Mi G Y, Wang C M. Study on the morphology and microstructure of 5A06 alloy by high-pulse-frequency pulsed laser micro polishing[J]. Materials Chemistry and Physics, 255, 123500(2020).
[68] Zhang X M, Ji L F, Zhang L T et al. Polishing of alumina ceramic to submicrometer surface roughness by picosecond laser[J]. Surface and Coatings Technology, 397, 125962(2020).
[69] Yan Z X, Lin Q Y, Li G J et al. Femtosecond laser polishing of SiC/SiC composites: effect of incident angle on surface topography and oxidation[J]. Journal of Composite Materials, 55, 1437-1445(2020).
[70] Zheng Q Z, Cui J L, Fan Z J et al. An experimental investigation of scan trajectory into the underwater femtosecond laser polishing SiC ceramic[J]. Ferroelectrics, 563, 77-86(2020).
[71] Fan Z J, Sun X M, Zhuo X S et al. Femtosecond laser polishing yttria-stabilized zirconia coatings for improving molten salts corrosion resistance[J]. Corrosion Science, 184, 109367(2021).
[72] Nüsser C, Sändker H, Willenborg E. Pulsed laser micro polishing of metals using dual-beam technology[J]. Physics Procedia, 41, 346-355(2013).
[73] Nüsser C, Kumstel J, Kiedrowski T et al. Process- and material-induced surface structures during laser polishing[J]. Advanced Engineering Materials, 17, 268-277(2015).
[74] Bhaduri D, Penchev P, Batal A et al. Laser polishing of 3D printed mesoscale components[J]. Applied Surface Science, 405, 29-46(2017).
[75] Hofele M, Roth A, Schanz J et al. Laser polishing of laser powder bed fusion AlSi10Mg parts: influence of initial surface roughness on achievable surface quality[J]. Materials Sciences and Applications, 12, 15-41(2021).
[76] Liang C Y, Hu Y Z, Liu N et al. Laser polishing of Ti6Al4V fabricated by selective laser melting[J]. Metals, 10, 191(2020).
[77] Chen L, Zhang X Z. Modification the surface quality and mechanical properties by laser polishing of Al/PLA part manufactured by fused deposition modeling[J]. Applied Surface Science, 492, 765-775(2019).
[78] Yung K C, Xiao T Y, Choy H S et al. Laser polishing of additive manufactured CoCr alloy components with complex surface geometry[J]. Journal of Materials Processing Technology, 262, 53-64(2018).
[79] Yung K C, Zhang S S, Duan L et al. Laser polishing of additive manufactured tool steel components using pulsed or continuous-wave lasers[J]. The International Journal of Advanced Manufacturing Technology, 105, 425-440(2019).
[80] Li Y H, Wang B, Ma C P et al. Material characterization, thermal analysis, and mechanical performance of a laser-polished Ti alloy prepared by selective laser melting[J]. Metals, 9, 112(2019).
[81] Fang Z H, Lu L B, Chen L F et al. Laser polishing of additive manufactured superalloy[J]. Procedia CIRP, 71, 150-154(2018).
[82] Qian W, Cai J, Xin Z D et al. Femtosecond laser polishing with high pulse frequency for improving performance of specialised aerospace material systems: MCrAlY coatings in thermal barrier coating system[J]. International Journal of Machine Tools and Manufacture, 182, 103954(2022).
[83] Temmler A, Liu D, Preußner J et al. Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11[J]. Materials & Design, 192, 108689(2020).
[84] Liu Y F, Ouyang W T, Wu H C et al. Improving surface quality and superficial microstructure of LDED Inconel 718 superalloy processed by hybrid laser polishing[J]. Journal of Materials Processing Technology, 300, 117428(2022).
[85] Zhou Y Q, Zhao Z Y, Zhang W et al. Experiment study of rapid laser polishing of freeform steel surface by dual-beam[J]. Coatings, 9, 324(2019).
[86] Zhou H, Zhao Z Y, Zhou H M et al. Study on dual-beam laser polishing of surface of S136D die steel[J]. Surface Technology, 50, 111-120, 128(2021).
[87] Hafiz A M K, Bordatchev E V, Tutunea-Fatan R O. Influence of overlap between the laser beam tracks on surface quality in laser polishing of AISI H13 tool steel[J]. Journal of Manufacturing Processes, 14, 425-434(2012).
[88] Temmler A, Willenborg E, Wissenbach K. Laser polishing[J]. Proceedings of SPIE, 8243, 82430W(2012).
[89] Yan H, Wu C L, Tang X F et al. The research status and development trends of chemical mechanical polishing[J]. Materials Research and Application, 15, 432-440(2021).
[90] Kim M, Bang S M, Kim D H et al. Hybrid CO2 laser-polishing process for improving material removal of silicon carbide[J]. The International Journal of Advanced Manufacturing Technology, 106, 3139-3151(2020).
[91] Acevedo R, Sedlak P, Kolman R et al. Residual stress analysis of additive manufacturing of metallic parts using ultrasonic waves: state of the art review[J]. Journal of Materials Research and Technology, 9, 9457-9477(2020).
[92] Tarasov S Y, Vorontsov A V, Fortuna S V et al. Ultrasonic-assisted laser welding on AISI 321 stainless steel[J]. Welding in the World, 63, 875-886(2019).
[93] Kang D, Zou P, Wu H et al. Research on ultrasonic vibration-assisted laser polishing of the 304 stainless steel[J]. Journal of Manufacturing Processes, 62, 403-417(2021).
[94] Kang D, Zou P, Wu H et al. Theoretical and experimental study of ultrasonic vibration-assisted laser polishing 304 stainless steel[J]. IEEE Access, 8, 206146-206163(2020).
[95] Wu Z P, Dong Y W, Zhang S T et al. Discussion on effect of laser parameters and trajectory in combined pulse laser drilling[J]. International Journal of Hydromechatronics, 4, 43-54(2021).
[96] Wang Y F, Chen X Z, Shen Q K et al. Effect of magnetic field on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by wire arc additive manufacturing[J]. Journal of Manufacturing Processes, 64, 10-19(2021).
[97] Wang L, Rong Y M. Review on processing stability, weld defects, finite element analysis, and field assisted welding of ultra-high-power laser (≥ 10 kW) welding[J]. International Journal of Hydromechatronics, 5, 167-190(2022).
[98] Fritzsche A, Avilov V, Gumenyuk A et al. High power laser beam welding of thick-walled ferromagnetic steels with electromagnetic weld pool support[J]. Physics Procedia, 83, 362-372(2016).
[99] Wang L, Yao J H, Hu Y et al. Suppression effect of a steady magnetic field on molten pool during laser remelting[J]. Applied Surface Science, 351, 794-802(2015).
[100] Xiao H B, Zhou Y Q, Liu M J et al. Laser polishing of tool steel using a continuous-wave laser assisted by a steady magnetic field[J]. AIP Advances, 10, 025319(2020).
[101] Temmler A, Graichen K, Donath J. Laser polishing in medical engineering[J]. Laser Technik Journal, 7, 53-57(2010).
[104] Chen L, Richter B, Zhang X Z et al. Modification of surface characteristics and electrochemical corrosion behavior of laser powder bed fused stainless-steel 316L after laser polishing[J]. Additive Manufacturing, 32, 101013(2020).
[105] Bures M, Zetek M. Application of laser surface polishing on additive manufactured parts of Inconel 718 nickel-based superalloy[J]. MM Science Journal, 2020, 3873-3877(2020).
[106] Li Y H, Zhang Z, Guan Y. Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting[J]. Applied Surface Science, 511, 145423(2020).
[107] Ribeiro K S B, Mariani F E, Idogava H T et al. Evaluation of laser polishing as post-processing of Inconel 625 produced by directed energy deposition[J]. Procedia Manufacturing, 53, 368-374(2021).
[108] Liao C H, Zhou J, Shen H. Electrochemical corrosion behaviors before and after laser polishing of additive manufactured TC4 titanium alloy[J]. Chinese Journal of Lasers, 47, 0102003(2020).
[109] Lai M H, Lim K S, Gunawardena D S et al. CO2 laser applications in optical fiber components fabrication and treatment: a review[J]. IEEE Sensors Journal, 17, 2961-2974(2017).
