• Optics and Precision Engineering
  • Vol. 18, Issue 1, 190 (2010)
WANG Guo-min1,2,*, GU Bo-zhong1,2, and ZHANG Kun1,2,3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less
    DOI: Cite this Article
    WANG Guo-min, GU Bo-zhong, ZHANG Kun. Preload analysis of two-piece outer ring self-aligning ball bearing and its application[J]. Optics and Precision Engineering, 2010, 18(1): 190 Copy Citation Text show less
    References

    [1] LIU X CH. Groove measuring and control of self-aligning ball bearing outer ring [J]. Bearing, 1998 (1):27-29. (in Chinese)

    [2] WANG H. Groove position error measuring of self-aligning ball bearing outer ring [J]. Bearing, 1994(6):36-37. (in Chinese)

    [3] ZHAO G Y. Relationship between clearance and contact angle of self-aligning ball bearing [J]. Bearing, 1996(12):6-8. (in Chinese)

    [4] YU M ZH. Center distance influence on mounting clearance of inner ring groove of self-aligning ball bearing [J]. Bearing, 2001(10):18-19. (in Chinese)

    [5] YANG D H, GU B ZH, CUI X Q. Stiffness calculation and application of self-aligning ball bearing [J]. Mechanical Science and Technology, 2003, 22(Supp.):114-117. (in Chinese)

    [6] LIU Z J, HE SH Q, LIU H. Application of Rolling Bearing[M]. Beijing: China Machine Press, 2007. (in Chinese)

    [7] JIANG SH F, LIU ZH SH, YANG M X. Preload technique of angular contact ball bearing [J]. Bearing, 2003(3):1-4. (in Chinese)

    [8] JIANG W, LIANG B, LI G W. Preload analysis and test method of matching bearings [J]. Bearing, 2001(4):25-27. (in Chinese)

    [9] LI S, ZHANG L P. Design and accuracy analysis for drift adjusting rotary axes of space camera[J]. Opt. Precision Eng., 2004,12(2):141-145.(in Chinese)

    [10] WANG J, LU E, WANG J Q. A study on the simplifying method of ball bearing in structural anslysis[J]. Opt. Precision Eng., 1999,7(2):110-115.(in Chinese)

    [11] LIU J H, DING H. Digital bearing clearance measuring instrument[J]. Opt. Precision Eng., 1995,3(1): 95-97.(in Chinese)

    [12] WANG G M, JIANG X, WANG Y F,et al.. Introduction of four different drive systems used in LAMOST focal plane[J]. SPIE, 2006,6273:62731J-1-62731J-11.

    [13] WAN CH S. Analysis Method of Rolling Bearing[M]. Beijing: China Machine Press, 1987. (in Chinese)

    WANG Guo-min, GU Bo-zhong, ZHANG Kun. Preload analysis of two-piece outer ring self-aligning ball bearing and its application[J]. Optics and Precision Engineering, 2010, 18(1): 190
    Download Citation